|
Re: FT 891 Sabrent no alc or power
#ft891
Tried again portable today. Now it will not hold ptt for the hole time and it will change frequently on the radio when done. (From 14.078 and stayed on 14.077 and not go back to 14.078)? I got a cq out with a reply but when sending a snr it didn't hold ptt. Just clicked on for a second. When cq went out the alc looked a little high above 2/3 but take that with a grain of salt. I'm new? I'm decoding fine. I have no idea I will get something to work and without changing anything it wouldn't the next try. About the only thing I can think of is if the cat cable is picked up rfi. Information? Z-11pro turner? Chameleon whip on car trailer hitch On Sun, Feb 27, 2022, 12:43 PM K0BBQ via <k0bbqradio=[email protected]> wrote:
|
|
Re: FT 891 Sabrent no alc or power
#ft891
On Sun, Feb 27, 2022, 7:28 AM km4ack <jason.oleham@...> wrote: Looks like you have the wrong sound card selected. Look for one with "codec" in the name and choose it. If it isn't obvious, post another screenshot like before but so we can see the sound card choices available. |
|
buster to bullseye on an ssd pi
I have a pi with buster installed to an ssd that I think i will move to bullseye. There are a lot of custom scripts in my home directory that I don't want to recreate and several of them are run from my crontab.
So my migration plans are this cp -a /home/pi? /media/USB_DRV? (a usb drive i use for backup) next step crontab -l > /media/USB_DRV/pi/my-crontab to backup the crontab settings. then copy everything back to the new bullseye install. Any other issues I should watch out for?? Is there a better way to do this? |
|
With the signalink, it is probably not a settings issue. More than likely it is an audio issue where you are not getting enough audio out of the pi to trigger the VOX on the signalink. Run this command
alsamixer use the F6 key to cycle between sound cards until you find the one with "codec" in the name. Turn the volume to max and see if the signalink will TX. You will probably need to adjust this once you get the PTT working to set the ALC on the radio correctly. -- 73, de KM4ACK
|
|
|
|
Re: Patron - WinLink Gateway
Hi Jim,
I don't have a TNC3 at the moment to test with but I'll try to get one ordered soon so I can test it with Pat Menu. It works fine with my TNC2 but there may need to be some tweaks to the code for the TNC3. Hence the reason this feature is still marked beta. There is a difference between the different models. The TNC2 uses channel 1 and the TNC3 defaults to channel 6. There are some older videos on my channel that may help you in the meantime. https://www.youtube.com/c/KM4ACK/search?query=mobilinkd -- 73, de KM4ACK
|
|
|
|
I am using a SignaLink for the 2m.? I've checked all connections; disconnected and reconnected, cycled power, rebooted, etc.
Here is pat configure settings, beginning below my log-in information.? I am not using any rig control.? I am manually adjusting the frequency as needed. I have checked the Direwolf configuration and everything appears to match with what I get when running arecord -l. ?"service_codes": [
? ? "PUBLIC"
? ],
? "http_addr": "127.0.0.1:5000",
? "motd": [
? ? "Open source Winlink client - getpat.io"
? ],
? "connect_aliases": {
? ? "telnet": "telnet://{mycall}:CMSTelnet@...:8772/wl2k"
? },
? "listen": [],
? "hamlib_rigs": {
? ? "my-rig": {
? ? ? "address": "127.0.0.1:4532",
? ? ? "network": "tcp"
? ? }
? },
? "ax25": {
? ? "port": "wl2k",
? ? "beacon": {
? ? ? "every": 3600,
? ? ? "message": "Winlink P2P",
? ? ? "destination": "IDENT"
? ? },
? ? "rig": ""
? },
? "serial-tnc": {
? ? "path": "/dev/ttyUSB0",
? ? "serial_baud": 9600,
? ? "hbaud": 1200,
? ? "type": ""
? },
? "winmor": {
? ? "addr": "localhost:8500",
? ? "inbound_bandwidth": 1600,
? ? "drive_level": 0,
? ? "rig": "",
? ? "ptt_ctrl": false
? },
? "ardop": {
? ? "addr": "localhost:5000",
? ? "arq_bandwidth": {
? ? ? "Forced": false,
? ? ? ?"Max": 500
? ? },
? ? "rig": "my-rig",
? ? "ptt_ctrl": false,
? ? "beacon_interval": 0,
? ? "cwid_enabled": true
? },
? "pactor": {
? ? "path": "/dev/ttyUSB0",
? |
|
Re: FT 891 Sabrent no alc or power
#ft891
On Sat, Feb 26, 2022, 6:01 AM K0BBQ via <k0bbqradio=[email protected]> wrote:
|
|
Re: FT 891 Sabrent no alc or power
#ft891
Alsa_output.usb-C..... Alsa_input.usb-C.... On Tue, Feb 22, 2022, 6:47 AM km4ack <jason.oleham@...> wrote: What do you have selected for audio in/out in settings? |
|
Re: Add modules to BAP installation
Cal, You can go to the Raspberry Pi menu in the top upper left hand corner, then down to Ham Radio, then Build-a-Pi, then click on Update-Tool. That will bring you to update what you already have installed, and the option to install more. Beau W6ERR On Feb 24 2022, at 10:18 am, Cal N9KO <n9ko@...> wrote:
|
K0BBQ
Alex (KD0YTE)
km4ack
Mark Earls, K7MEE
Mike/N1JMC