I am using a SignaLink for the 2m.? I've checked all connections; disconnected and reconnected, cycled power, rebooted, etc.
Here is pat configure settings, beginning below my log-in information.? I am not using any rig control.? I am manually adjusting the frequency as needed.
I have checked the Direwolf configuration and everything appears to match with what I get when running arecord -l.
?"service_codes": [
? ? "PUBLIC"
? ],
? "http_addr": "127.0.0.1:5000",
? "motd": [
? ? "Open source Winlink client - getpat.io"
? ],
? "connect_aliases": {
? ? "telnet": "telnet://{mycall}:CMSTelnet@...:8772/wl2k"
? },
? "listen": [],
? "hamlib_rigs": {
? ? "my-rig": {
? ? ? "address": "127.0.0.1:4532",
? ? ? "network": "tcp"
? ? }
? },
? "ax25": {
? ? "port": "wl2k",
? ? "beacon": {
? ? ? "every": 3600,
? ? ? "message": "Winlink P2P",
? ? ? "destination": "IDENT"
? ? },
? ? "rig": ""
? },
? "serial-tnc": {
? ? "path": "/dev/ttyUSB0",
? ? "serial_baud": 9600,
? ? "hbaud": 1200,
? ? "type": ""
? },
? "winmor": {
? ? "addr": "localhost:8500",
? ? "inbound_bandwidth": 1600,
? ? "drive_level": 0,
? ? "rig": "",
? ? "ptt_ctrl": false
? },
? "ardop": {
? ? "addr": "localhost:5000",
? ? "arq_bandwidth": {
? ? ? "Forced": false,
? ? ? ?"Max": 500
? ? },
? ? "rig": "my-rig",
? ? "ptt_ctrl": false,
? ? "beacon_interval": 0,
? ? "cwid_enabled": true
? },
? "pactor": {
? ? "path": "/dev/ttyUSB0",
?
Mark Earls, K7MEE