开云体育

Looks like you have the wrong sound card selected. Look for one with "codec" in the name and choose it. If it isn't obvious, post another screenshot like before but so we can see the sound card

With the signalink, it is probably not a settings issue. More than likely it is an audio issue where you are not getting enough audio out of the pi to trigger the VOX on the signalink. Run this

Hi Jim, I don't have a TNC3 at the moment to test with but I'll try to get one ordered soon so I can test it with Pat Menu. It works fine with my TNC2 but there may need to be some tweaks to the code

I am using a SignaLink for the 2m.? I've checked all connections; disconnected and reconnected, cycled power, rebooted, etc. Here is pat configure settings, beginning below my log-in information.? I

I'm in the same boat.? I have the latest Buildapi script that includes the Moblilinkd button on the Pat menu, but I can't get Pat or anything else to work with my TNC3 on my Pi4.

Are you looking for the ICS forms?? Those are in a different folder within PAT.? On the computer, they're stored here: ~/.local/share/pat/Standard_Forms/ICS USA Forms ICS exists well outside of

[email protected]> wrote:

Which version of Pi OS are you using? Buster or Bullseye?

Alsa_output.usb-C..... Alsa_input.usb-C....

I don't think you're doing anything wrong... those are also the only templates in the template FEMA subdirectory on my pi PAT also.? If you check, you will note that the GIS subdirectory lists

*not sure what’s going on I keep on getting gtk-warning And nothing will install. I’m using pi4 with 32g card*

I have Pat v2.6.0 running on my Pi.? I have Downloaded the latest Forms and also done the Update Form Templates. My issue is that I only have 2 FEMA Templates in the list.? They are FEMA Mission

Cal, You can go to the Raspberry Pi menu in the top upper left hand corner, then down to Ham Radio, then Build-a-Pi, then click on Update-Tool. That will bring you to update what you already have

I setup BAP v. 3.1.3 last November with a couple of modules Pat Winlink and gparted. I now want to activate the autohotspot and any Mobilinkd modules. I cannot see how I can to this. Pse help. Also, I

Awesome instructions! Im brand new to the pi, so im basically copy and pasting here. Now, Im getting an error while installing js8 this way and i was hoping you could help. Ill attach a picture with

First run this command: *whereis rigctld* and it will return something like: rigctld: /usr/local/bin/rigctld which indicates that rigctld is located at /usr/local/bin/ If yours is different you will

I found this [email protected] | Help with CM108 PTT ( /g/direwolf/topic/help_with_cm108_ptt/80422623?20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,80422623 )

Thanks Jason, That fixed it.? Is there a way to run the "rigctld -m 4" command from a batch file when Pi-APRS starts up? Fritz NM5XD

Thanks Jason. -- Echodelta10

I found a website https://www.seeedstudio.com/blog/2020/07/07/raspberry-pi-rtc-tutorial-using-ds1307-and-ds3231-rtcs-with-raspberry-pi-m/ that supposedly makes installing a ds-3231 easy-peasy.? I