开云体育

The POWERmini2 User Guide that came with my unit is Copyright 2021.? The Specifications Sheet on Page 13 lists a USB output voltage of 5.2 volts with a USB charge maximum output current of 4.0

Hi I have been only following this a little, but if this is a Pi with only 2GB of memory you will have to increase the swap space to get Fldigi to complete its build. Maybe some of the others also. I

After reading the FAQ's last night, I found that the newer versions of build a pi can run the script multiple times to install software. I will give that a run this morning when I get to the machine.

I haven't had the problem with nothing installing.? But when I initially used the BAP script, I didn't select the fldigi selections.? When I went back in to the script and selected to install

I did go through and try three different installs. On the last one I did the manual checking as you suggested it still had the same result.

Which version of BAP are you running? There was an issue back in February that was causing WSJTX to not install correctly. https://github.com/km4ack/pi-build/issues/209 -- 73, de KM4ACK YouTube (

Thanks for the report. I'll look into this. Have you tried manually placing check marks by each app? Did they install correctly for you? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip

So I am trying to install build a pi on a fresh install of Raspbian (on a RPi 3 B+). I run the script from GitHub and input my call, plug in the GPS, hotspot info, etc. I click "check all and

Anyone order a Buddipole Power Mini recently from Buddipole? I hear there is a version 2 with higher USB amps but the site does not mention ver 2 at all? Thanks in advance. KD9HYG.

Yes, I should have copied that as well. The article in the link mentioned that. I played with a number of things in config.txt to get the display the way I wanted with VNC. -- Al AE2T

Hi Jason, I have noticed that the GPS/GLONASS direct USB mount dongle is clearly weaker than the G-MOUSE RoHS IPX6 magnetic mount GPS and the GlobalSat BU-353-S4 USB magnetic mount GPS dongles.?

I have a D710. I use the comm port in the head of the radio. I use RT system usb 6 pin din. You will need to find the /dev/ttyUSB?? and put these in YAAC or Xastir.Set up the APRS program for Igate.

Hi, I am not sure if this is relevant. But I got Pi4 for my friend (unfortunately the June version with broken WiFi) We have installed from scratch 3 times and WSJTX was missing each time. I think

ok. let's see if the pi is getting the data. In a terminal, run: *cgps* and verify you have GPS data. Provided you do, run this command next: *~/bin/conky/get-grid* and see if it returns your grid

Jumping in here, but keep in mind, my use case is quite limited; mostly just Pat for Winlink access. And even at that, it's mostly just tinkering, and nothing serious. All that said, I am able to

Sorry Garret, I can't answer the question as I have no experience with the D710G. Maybe someone else who owns the rig can jump in here. You might also check the direwolf forum

I'm using the Argon 4 case with SSD and the USB 3.0 ports are jamming the gps dongle. I connected a long USB and that's okay, but is messy and fragile with the cable strewn across the room. I have a

If it will be plugged in at boot, change the /etc/default/gpsd file so that autostart is false rather than true. That fixed an issue for me.

**uncommented** dang spellchecker

***uncommented***