开云体育

Yes, blinking steadily like it did when it was working in Conky.

Jason, Thanks for your wonderful videos. With zero experience I have my Pi running through a VNC. My main purpose for this Pi is to create an I-Gate for my Kenwood D710G as a APRS radio for the QTH. I

***uncommented*** dang spellchecker

Al, There was a “hdmi_mode=1” that I I commented that seems to work. Remote VNC takes awhile but it does refresh after reboot. Thanks a bunch. ? Richard - KI5EVJ

Good day all after a BAP. Update of software on my rpi4b 8GB the following happened qsstv was the older version as found under preferences- add / remove software -QSSTV The problem with that version

Is the green light blinking on the GPS? This will indicate that the GPS has a lock on satellites. If not, try setting the GPS next to a window. It may just need a clear line of sight to the sky. --

HiFiBerry makes a Pi3b version of that case. I know because I ordered it by mistake! The HiFiBerry HighPi case for Pi4 is currently out of stock on Amazon, which is what led me to order the wrong one.

I have had to restart Conky and/or run the configuration for the GPS again. It seems like the GPS doesn't always start on it's own. -- Al AE2T

I'm figuring out the PI and what all it can do but I could use some help on the USB U-blox7 GPS. It was showing the gridsquare fine in Conky but now I have nothing. I'm not sure it's working at all

I can confirm that behavior. I don't mind the VNC connection being lost, it would be anyway, but being able to reboot and have it restart on it's own unattended is crucial. -- Al AE2T

That is not the MakerFocus board causing that. You need to add a line (possibly uncomment it, if it's already in there) to your /boot/config.txt file #for VNC headless operation # see

Jason et al.: I added the MakerFocus Power board to my Pi 4 so I could rum the Pi from a 12v battery. I did run the script - it appears that all it does is allow the remote to turn on the board after

You are exactly right Jason…the Digimode-4 was connected during BAP install. And to clarify, by “Allow the selection of None…” I meant “Add None to the dropdown…”. Obviously ?this

Good afternoon Vic. I don't understand it either! I can get FLrig running fine connected to the 'serial port' of the IC-705. However if I try to set up the 'audio' port to use -- FLdigi for instance,

Jason, Ive got a really ugly weekend starting in about an hour so I won’t be able to get on GitHub for at least a couple days. However I think this might be your best option. Have the GPS default to

I didn't understand the issue with not being able to run Fldigi and an audio card at the same time. If you have rig control through the USB and with Flrig, and an audio sound card plugged in to

GPS needs a clear line of sight to work (i.e. being outside). That being said, depending on your house construction and location, you might have success by putting it next to a window. wrote:

Hi Don, sounds interesting. How do you handle PAT with the SCS-Pactor Modem. The basic code is implementation in the source from PAT without frequency manipulation (see link in my message). 73 de

Followed the video, Looks to be working, Main problem I have now is getting the GPS to sync up from inside the house.

I have a usb SCS-PTC 11EX tnc. I certainly use that as I'm finding my Bluetooth doesn't connect to well across several rooms. I could VNC and run Pat Winlink via VNC from my main desktop. 73 *Don