开云体育

I? contacted Bomar about crystals for my SX-117 and they wanted complete specs for the crystal, which of course I didn't have.? I offered to send them the schematic so they could maybe determine

Thank you so much Jim! Fingers crossed!

Good evening, I somehow lost the last post while editing it; it's in your quoted text and replaced here. "Late to the post.? If the shift is only 50Hz, something is amiss.? Should be as in

Hallicrafters S-200 4 tubes and 5 bands. Hallicrafters S-210 6 tubes and 6 bands You can draw your own conclusions about "similar"! Although they both come in a simulated type wood case style,

Score!Thank you Walt!

Hallicrafters S-200 4 tubes and 5 bands. Hallicrafters S-210 6 tubes and 6 bands You can draw your own conclusions about "similar"! Although they both come in a simulated type wood case style,

Thanks Walt,I kind-a knew they were not similar, especially sine the S-210 has the FM band.-Drew

Manualman.com has the S210 manual for $13.25. Walt Cates, WD0GOF https://wd0gof.com/Hallicrafters A majority of acceptance is not proof of

The s-200 and the s-210 are not similar. The S-200 is a 4 tube single conversion receiver. The S210 is a 6 tube dual conversion receiver. Walt Cates, WD0GOF https://wd0gof.com/Hallicrafters A

Greeting fellow Hallicrafters Enthusiasts,I'm looking for two manuals: 1. The Hallicrafters S-200 or S-210 manual, or specifically the S-210 Schematic. I have a working S-210, that I re-capped, but it

Out of business C

have you tried these: [cid:c66d3fbb-d0cd-4686-a70f-4cb037d880b5] Walt Cates, WD0GOF https://wd0gof.com/Hallicrafters A majority of acceptance is not proof of

Hi Jim. The manual states 50HZ shift. I understand you can change the 33pf cap and move it around to your liking. I just was curious as to why this was even happening. My Second SR2000 has no

Paul, I would also be interested in 1-2 TX for the HT32s I have here. I've already had one TX fail. 73/jeff/ac0c alpha-charlie-zero-charlie www.ac0c.com

Got it. Thank You C

Thanks, Walt. Mine is a “673” transformer so I’m guessing it pre-dates the factory change to the upgraded transformer. Capacitor and crystal date codes are from 12/1962 to mid-1963. ?This

If you don't work CW, it won't make any difference. If you do, it would give you more power output in CW. Walt Cates, WD0GOF https://wd0gof.com/Hallicrafters A majority of acceptance is not proof

Tom Thanks for the suggestions...I will be taking apart the case sometime in the next few days and keep you posted I had the foresight to remove the batteries in both units when I put them away, so

Thanks Walt. I was on the right path. My radio seems to work fine without the offset. I was curious as to why it was even there. C

Another frequent problem (at least out here in DRY Colorado, is "zorching" of the front-end FET.? Static WILL take it right out, as there's no protection in front of it.? The NTE sub works quite