开云体育

Thanks Larry! I really appreciate it. Our domestic and International clients seem to grow every day. Vintage HI-Fi restoration also seems to be hot. Pete, wa2cwa www.manualman.com On Sat, 8 Feb

Emanuele, no need to reply to this, it is more for others that have an S-85. I don’t blame you for being fed-up with this radio, and giving up; we all have had that feeling, but for the benefit of

Guys, one of the reasons I wants to give up with this one is the poor design in the ANT RF circuitry. I noticed the schematic diagram anomalies, both the 1&2 bands wiring error and the fancy S1A-REAR

Maynard, the arrows inside the wafers do the trick for me, together with the “shown in band 4 position” general note. One of my first obstacles was understanding the first wafer; it was mucking

Pete - I have ordered several manual reprints via your company.? I find the product to be just as good (if not better) than an original.? The Heathkit manuals are sort of a benchmark for me and

Hi Maynard , this was my posting not the OP Emanuele’s but I will convey my understanding. First off: this is one manual version or copy. Perhaps there are others that look correct.. And/or there

Another interesting thing about the diagram: The S-40B diagram has "(FRONT)" and "(REAR)" but not "(FRONT) VIEWED FROM REAR" as for the S-85. The S-40B diagram does show both clockwise and

I agree that the lefthand diagram seems wrong. Note the arrows that show rotation in opposite directions to synchronize the contacts on the wafer as you view each side of the wafer. It seems to me

Thank you, Bill! This site has been very helpful to me. 73, Maynard W6PAP

Thanks Bill, you have done a great job over seeing the site. Skip Magnuson W7WGM

Great site - thank you Bill! [email protected]> wrote:

Took me a while to get here but I am happy to be a member of this group.? Thanks you! Bob WB9RHW

Emanuele and all This is from BAMA for mark 1A and 1B and makes no sense to me, so I rewired it at the right. What say you all?? Do you go with Halligans version? Don end

And thank YOU, Walt Tom Latimer

Bill Congratulations on the 20th anniversary.....all your work has been appreciated, even by those of us who aren't amateur operators You certainly have collected a BUNCH of experts Tom

Thank you, Bill! Walt Cates, WD0GOF https://wd0gof.com/Hallicrafters A majority of acceptance is not proof of

Emanuele RE I decided to leave it alone, I give up. Don’t do that, the radio is 99.777% , just some strange thing left. It’s ok to take a break and let the brain cool down. I follow your

Put it aside but don't give up on it. How did you decide the IF frequency? When the IF has a crystal filter the crystal determines the exact IF frequency but when there is no crystal you just

Guys, I performed a complete RF alignment once again. I used a sig-gen and the SA just as a "receiver" to "see" the LO signal and followed the service manual instructions. LO was fine in all bands

Great and Useful site!! Thanks wa3gin [email protected]> wrote: