开云体育

Last year I acquired an HP 8485A thermistor sensor from Sphere as they closed down.? While this one works well, even up to 33 GHz, it lacks a calibration chart and instead has special markings shown

Hi Razvan Thanks! I hadn't seen AN215 so I'll give it a good read through. To be fair, I'm still not sure if the the 1830A is better than the N432A or the other way around. There isn't enough

I saw the video and they forgot one instrument in standby before starting the application which resulted in the failed demo. Strange that the application cannot recover from this state even after the

Hi Jeremy, Yes, you are right, it looks like the N432A is much better compared to the Tegam unit but you have to take in consideration also the price which is more than double for the Keysight one. I

I bought the Artek manuals for the ESA spectrum analyzer and they were useless. The Tracking Generator is the older version in the manual and the RF deck is also different and my unit was built in

Well, I don't know what the "Zia sun sign state" is, but in CO I lived at 6500' in a house that had maybe 70% fenestration. Without blinds and shades, the house was warm during the day. Even on days

DAng! So brown and hanging down is coming with P-touch, eh? Big sun here in the Zia sun sign state. I've got about thirty labels on my akro mills drawers now. And room for 200 more. Maybe I'll look

Also, P-touch label longevity depends on the ink color used. Black lasts a lot longer than red or blue. The white background browns over a period of a couple of years in strong sunlight. When I was in

Keep in mind that there are at least TWO versions of the RF Deck board and the Artek manual only has the early version. Do not have the part numbers handy. Mark

They probably have longer time since used for wiring labels. P-touch lasts maybe 7 years in sun, like vinyl lettering signs and most sign printing.

I have no idea of the longevity, but i recently switched from dymo to brady label maker. brady is expensive but I've been able to get several types of labels - indoor fabric, outdoor nylon or poly,

https://artekmanuals.com/ has them, the trick is to search on E4401B. Best regards Marcus

I've used a great many of those labels for all sorts of stuff over the years. What you want to avoid is the ones labled "removable", they just don't stick all that well. If the ones you have don't

Dear Group, I have been trying to get the schematics of an Agilent (HP) E4407B ESA-E spectrum analyser. I am replacing the notorious frequency divider. I would really appreciate if any member of the

Hello everyone. Suddenly my spectrum analyzer (HP 8566B) has the following problems: the low band signal is about 40 dB lower than it should be. The high band has stopped working: the various bands no

Offered for sale: A new, unused HP 85719A Noise Figure Personality Card, still enclosed and sealed in its original wrapped binder containing the associated documentation. Interested parties are

According the user's manual (08590-90301) : *Improved Amplitude Accuracy for CDMA (Option 053)* For HP 8591E, HP 8593E, HP 8594E, HP 8595E, and HP 8596E only. This is an amplitude?calibration that

I've used P-touch tape for a long time and it works well except that the lettering fades when exposed to sunlight over time. I USED to use rub-on lettering. I'd fabricate the panel, apply the

Additional info to my previous post: -I do NOT use an ECal unit. -HP8510C Firmware: 07.14, Aug 26th 1998 As said this works together with? my HP8340A Rev 23, May 85 Serial Prefix 2602A Tom

If you want flat labels on a flat box, there's a way to do them that isn't too bad. two ways: 1) print a color inkjet (or laser) on a transparency reversed. Mount the transparency ink down so it reads