开云体育

Brand new to Gemini. Just received G-11 Gemini 2 yesterday. Have yet to fire it up as I have a dec axis CW issue. When entering location data, do you use minutes or decimal notation? My longitude is

Hallo again, I have been this morning on the observatory.. I checked the Gemini 2.. all it is good.. The problem: My partner connected the HC on the Serial Port 1.. I connected in the SP2.. and all

I will have to check that out - sounds like the easiest solution to me! Lee

Ok Tom...thanks I will chek it tomorrow.. and let you know Regards Miguel Angel Pérez Hernández Alpha Cygni S.L. www.alphacygni.com c/ San Agustín, 23 38410 - Los Realejos S.C. de

PS There may be some confusion here, as the Faceplate on the Gemini 2 is labeled Serial Port 1, Graphics HC and Serial Port 2, Graphics HC, while the Web interface refers to them as Serial port 0 and

Miguel You set the baud rates for the serial ports using the Web inteface. Goto the Serial link and set serial port 1 to 57600 baud. Tom Hilton

Hallo René, It is the same Gemini and Hand Control that I reprogrammed the last Friday. I checked it again on Saturday morning, and all worked good.. I?m not very sure what happened, I will check

Hallo Miguel, Can you tell us what has been done? Is it the same Gemini board? Is the correct port used, its baud rate for the HC (57k) set, ... The SD card should be freshly formatted at the

Hallo everybody, Last night I received a called from one partner in the Observatory asking me for a problem with the Gemini 2... Hand Control showing "Connecting to Gemini".. I don?t understand

lroehrdanz wrote: If the laptop Ethernet is Gigabit, you do not need a crossover cable. Gigabit does autosensing on cable connections. I have a notebook with 100Mb connected to a gigabit switch with a

Tom it can depending on the type of router and if it does bridging/repeating. most do not. but some do. I have a Buffalo Router that does. I bought it for that reason (actually in my case for

Hi Paul, Thanks. saludos Rainer

Hi Rainer, The latest ASCOM driver is 1.0.17 and is available in the Files section of this group, as well as in the GEMINI_ASCOM_Driver group. This version supports both, Gemini 1 and Gemini

Doug The Http://gemini will not go across the routers if one is on 192.168.1.xxx and the other on 192.168.2.xxx In my case my first router is 192.168.1.2 (the one connected to the internet) and my

I haven't played with this on a PC in a while. it used to be that Windows did not create a proper bridge (even though they call it that) between the two networks i.e. the wireless may be on

Lee The crossover works just fine. I find the router easier. Good day Tom Hilton Sent via DROID on Verizon Wireless

Thanks Doug - that's good to know.

Hey Tom, Well, unfortunately it quite that simple ;) I do have a router with open ports, but unfortunately it's not accessible to my telescope. I run a couple wireless networks at home and access

Hi René, ok.. if you confirm when it is solved ti will be great. Spanish translation: Sin problema !! ... but I will need time for this, the Gemini 2 is now going to the observatory.. If you have a

Miguel, I will, maybe tomorrow, since I'm just implementing some new functionality. In the meantime, as a workaround, just tap the Latitude value a second time and ENT, (each time reverses the