开云体育

I will have to check that out - sounds like the easiest solution to me! Lee

Ok Tom...thanks I will chek it tomorrow.. and let you know Regards Miguel Angel Pérez Hernández Alpha Cygni S.L. www.alphacygni.com c/ San Agustín, 23 38410 - Los Realejos S.C. de Tenerife Islas

PS There may be some confusion here, as the Faceplate on the Gemini 2 is labeled Serial Port 1, Graphics HC and Serial Port 2, Graphics HC, while the Web interface refers to them as Serial port 0 and

Miguel You set the baud rates for the serial ports using the Web inteface. Goto the Serial link and set serial port 1 to 57600 baud. Tom Hilton

Hallo René, It is the same Gemini and Hand Control that I reprogrammed the last Friday. I checked it again on Saturday morning, and all worked good.. I?m not very sure what happened, I will check it

Hallo Miguel, Can you tell us what has been done? Is it the same Gemini board? Is the correct port used, its baud rate for the HC (57k) set, ... The SD card should be freshly formatted at the start.

Hallo everybody, Last night I received a called from one partner in the Observatory asking me for a problem with the Gemini 2... Hand Control showing "Connecting to Gemini".. I don?t understand

lroehrdanz wrote: If the laptop Ethernet is Gigabit, you do not need a crossover cable. Gigabit does autosensing on cable connections. I have a notebook with 100Mb connected to a gigabit switch with a

Tom it can depending on the type of router and if it does bridging/repeating. most do not. but some do. I have a Buffalo Router that does. I bought it for that reason (actually in my case for the

Hi Paul, Thanks. saludos Rainer

Hi Rainer, The latest ASCOM driver is 1.0.17 and is available in the Files section of this group, as well as in the GEMINI_ASCOM_Driver group. This version supports both, Gemini 1 and Gemini 2.

Doug The Http://gemini will not go across the routers if one is on 192.168.1.xxx and the other on 192.168.2.xxx In my case my first router is 192.168.1.2 (the one connected to the internet) and my

I haven't played with this on a PC in a while. it used to be that Windows did not create a proper bridge (even though they call it that) between the two networks i.e. the wireless may be on

Lee The crossover works just fine. I find the router easier. Good day Tom Hilton Sent via DROID on Verizon Wireless

Thanks Doug - that's good to know.

Hey Tom, Well, unfortunately it quite that simple ;) I do have a router with open ports, but unfortunately it's not accessible to my telescope. I run a couple wireless networks at home and access

Hi René, ok.. if you confirm when it is solved ti will be great. Spanish translation: Sin problema !! ... but I will need time for this, the Gemini 2 is now going to the observatory.. If you have a

Miguel, I will, maybe tomorrow, since I'm just implementing some new functionality. In the meantime, as a workaround, just tap the Latitude value a second time and ENT, (each time reverses the sign).

Thank you very much Tom, I have sent an email to my partner in the observatory, I have not the Gemini 2 in my hands yet.. René, please, as soon this bug is fixed.. let us know.. Thanks! Miguel Angel

Miguel, Tom, Thank you, I'll fix this. The problem is the LX200 protocol, it sends the values with reverses signs. I have to adapt this at every place where it is used. Ren??? tom@...