开云体育

Dumb question I suppose, but I'm not finding the answer.. I have two radios: ? Radio 1 is an IC-7600? Radio 2 is a Ten Tec Orion II I both configured in Commander, I may have something set

Reducing power does eliminate the problem.? Also just noticed the mode switches between USB, where I set it, to LSB and then back again.? This is where the VFO display is.? Weird.73,Bill

Hi Bill, OK. So if you reduce power to minimum, or use a dummy load, does the issue go away? 73 Bill G4WJS.

In WSJT-X I selected DX LAB SUITE Commander as the radio.?73,Bill

See attached pic taken during transmit.73,Bill

Hi Bill, can you explain how you have arranged for Commander to have CAT control of your rig while WSJT-X is also using the CAT interface? 73 Bill G4WJS.

RIT is off.Bill

Can you explain exactly what you see in Commander when the above happens please? What rig do you have and what options have you selected for WSJT-X "Settings->Radio->RIg", "Settings->Radio->PTT

Mike - I am so glad you sent that You Tube... last summer my car was in the shop because it was running a bit roughly, but only sometimes. They ended up replacing the engine... thank goodness it was

Do you RIT (clarifier in Yaesu...) enabled and tuned on the rig? If so, the tx freq will change as RIT gets removed for TX.... [email protected]> wrote:

Hi Bill, RFI will not affect a piece of software, it could affect your CAT interface but the error you describe does not sound like that. Can you explain exactly what you see in Commander when the

Looks like I am getting RF via the CAT cable into DxCommander.? When transmitting the VFO frequency will drop to 00 then go back to the selected frequency when in receive.? WSJT-X and the rig's

+ AA6YQ comments below Maybe it is time to find another source but then is there any with the amount of data they have. This is the problem with a one source solution. It would be neat if PF cold

QRZ now seems be back.

+ AA6YQ comments below I’ve been having trouble with Pathfinder all morning – they must be having a problem + Pathfinder has been working correctly. QRZ.com now appears to be available. + Note

QRZ is up for me... 73 Don W4WJ

Installed new turbo-encabulator … ;>) https://www.youtube.com/watch?v=MXW0bx_Ooq4 - 73 and good DX de Mike, <http://www.qrz.com/db/k6mkf/> K6MKF, <https://www.ncdxc.org/> NCDXC Secretary Sent:

Looks like it just came back up. 73, Bob WB2NVR

You can check if the problem is yours, or if the site is down for everyone here: https://www.isitdownrightnow.com/qrz.com.html 73, Bob WB2NVR

Maybe it is time to find another source but then is there any with the amount of data they have. This is the problem with a one source solution. It would be neat if PF cold automatically go to a