Hi Bill,
OK. So if you reduce power to minimum,
or use a dummy load, does the issue go away?
73
Bill
G4WJS.
On 14/03/2020 17:58, Bill via Groups.Io
wrote:
toggle quoted message
Show quoted text
In WSJT-X I selected DX LAB
SUITE Commander as the radio.?
73,
Bill
On Saturday, March 14, 2020, 12:34:34 PM CDT, Bill via
Groups.Io
<ko4nrbs@...> wrote:
See attached pic taken during transmit.
73,
Bill
On Saturday, March 14, 2020, 12:31:22 PM CDT,
g4wjs
<bill.8@...> wrote:
Hi
Bill,
can
you explain how you have arranged for
Commander to have CAT control of your rig
while WSJT-X is also using the CAT
interface?
73
Bill
G4WJS.
On
14/03/2020 17:28, Bill via Groups.Io wrote:
Can
you explain exactly what you see in
Commander when the above happens
please?
What rig do you have and what
options have you selected for
WSJT-X
"Settings->Radio->RIg",
"Settings->Radio->PTT Method",
"Settings->Radio->Mode",
and "Settings->Radio->Split
Operating"?
Rig
is a Kenwood 850S.
Settings:
Radio-
Kenwood
PTT
Method-? CAT
Mode-
None
Split-
None
What
I see is the VFO A frequency in
Commander goes to 00 during transmit
then back to my selected frequency
when the rig is toggled to receive.
73,
Bill
On Saturday, March 14, 2020,
12:21:42 PM CDT, Bill Pence
<pence.bill@...>
wrote:
Do you RIT (clarifier in
Yaesu...) enabled and tuned on
the rig?
?If so, the tx freq will
change as RIT gets removed for
TX....
Looks
like I am getting RF
via the CAT cable into
DxCommander.? When
transmitting the VFO
frequency will drop to
00 then go back to the
selected frequency
when in receive.?
WSJT-X and the rig's
frequency does not
change.
What mix
clamp on ferrites
should I use on the
cable?
73,
Bill
KO4NR
