Hi Bill,
can you explain how you have arranged
for Commander to have CAT control of your rig while WSJT-X is also
using the CAT interface?
73
Bill
G4WJS.
On 14/03/2020 17:28, Bill via Groups.Io
wrote:
toggle quoted message
Show quoted text
Can you explain exactly what you see
in Commander when the above happens
please? What rig do you have and what options
have you selected for
WSJT-X "Settings->Radio->RIg",
"Settings->Radio->PTT Method",
"Settings->Radio->Mode", and
"Settings->Radio->Split Operating"?
Rig is a
Kenwood 850S.
Settings:
Radio-
Kenwood
PTT
Method-? CAT
Mode- None
Split- None
What I see
is the VFO A frequency in Commander goes to 00 during
transmit then back to my selected frequency when the rig
is toggled to receive.
73,
Bill
On Saturday, March 14, 2020, 12:21:42 PM CDT, Bill Pence
<pence.bill@...> wrote:
Do you RIT (clarifier in Yaesu...) enabled and
tuned on the rig?
?If so, the tx freq will change as RIT gets
removed for TX....
Looks like I am getting RF via
the CAT cable into DxCommander.? When
transmitting the VFO frequency will drop to
00 then go back to the selected frequency
when in receive.? WSJT-X and the rig's
frequency does not change.
What mix clamp on ferrites
should I use on the cable?
73,
Bill KO4NR
