开云体育

-----Original Message----- Sent: Tuesday, March 01, 2016 11:35 AM To: Alan Swinger; dxlab@... Subject: RE: [dxlab] Reload DXLab after IS Reinstall Dave - I spoke too soon. Download from

Well--problem solved thanks to Dave on making Commander and the 6700 talk. My next task was to get CW Skimmer working--turned out I had to download another program SDR-Bridge to make that work. My

There's one thing I'd love to do but honestly I don't know if it's possible or feasible. As you know, I converted my entire log from DX Base format three years ago, and that program has a bizarre way

OK, done. I spent a couple of hours going through the log and getting rid of two classes of bad QSL entries; those with "N" that shouldn't have been and those with "Y" that were never, in fact, QSLd

Please forgive fat fingers that was supposed to say 18.068126 :-( 73, Rich - W3ZJ http://www.w3zj.com

Just worked him 17M at 10.068126 (126 Hz inside the band) all the spots I see for him in 12M show he is on or slightly above the band edge. 3 of the 12M spots were from reverse beacon stations that

Is it not possible to save downloaded eQSL images to another server or location on my network? I attempted to access the network using QSL config, then chose to browse to the network path I would like

Dave - I spoke too soon. Download from LoTW is not working. When I click on Sync LoTW QSOs and Sync LoTW QSLs, I get this Message: "Unable to Download from LoTW: Download failure". Also when I click

I don't have that box checked.

Windows reboot now has greyline showing. I'll keep an eye on it. thanks jim ab3cv

I would guess that, technically, if the other fellow is out of band, then it's not a valid contact for DXCC. I have run into that with a DX station recently, when I zero-beat him I concluded he was 30

Yes I have Spot Collector installed. Inside spot collector, all 4 are set to black, and they are well displayed in SC. But Inside DXkeeper..... if I change it, to the needed colors, DXK will not keep

This morning 3XY1T was calling CQ (split) just a hundred (if that) Hz or so below 24,890 for a while. Tuning to him - even when split with the TX VFO in the band - caused Commander to blank the

If there's an errorlog.txt file in your DXView folder, please attach that to an email message, and send it to me via aa6yq (at) ambersoft.com If that's not the case, please reboot Windows just to make

Yes I have spot collector installed and I say them properly displayed with my personal colors in Spot collector. But not in DXkeeper. J-F VA2SS

-----Original Message----- Sent: Tuesday, March 01, 2016 10:34 AM To: dxlab@... Subject: [dxlab] ClubLog Inbound OQRS and QSL_Rcvd I set up the Inbound OQRS according to the instructions

Core-I5-6260U, 16G memory, 256G SSD. This is the latest Skylake chip. Graphics provided by the Intel CPU. thanks jim ab3cv

This is a new computer with a fresh load of DXlabs. I really don't remember if it happened when it was first loaded or not. Should I just CTL-LD DXView and start it fresh? Or would you prefer I turn

I set up the Inbound OQRS according to the instructions and it works great. Thanks for the feature Dave. My question is about what gets printed in the 'QSL?' field on the labels. The QSL requests from

-----Original Message----- Sent: Tuesday, March 01, 2016 10:19 AM To: dxlab@... Subject: [dxlab] Grey line not showing on DXView World Map 4.1.8 For some reason the greyline and sun