Just worked him 17M at 10.068126 (126 Hz inside the band) all the
spots I see for him in 12M show he is on or slightly above the band
edge. 3 of the 12M spots were from reverse beacon stations that show
him at 24.891. He is working close to the band edges and guess he
could have slipped a bit at one point but I would be pretty careful
that close to the edge.
73, Rich - W3ZJ
On 3/1/2016 10:51 AM, 'Joe Subich,
W4TV'
lists@... [dxlab] wrote:
toggle quoted message
Show quoted text
This morning 3XY1T was calling CQ (split) just a hundred (if that) Hz
or so below 24,890 for a while. Tuning to him - even when split with
the TX VFO in the band - caused Commander to blank the bandspread and
switch to the "out of band" color. Short of editing the Sub-Band
definition files to "extend" each band by 1 KHz, is there a way to:
(1) provide some tolerance on the band edges or (2) trigger the
blanking/out of band action based on the transmit frequency?
If not, could there be?
73,
... Joe, W4TV
