¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. DXLab
  2. Messages
Single Messages Topics Expanded Polls

Re: Commander Bandspread "tolerance"

 

I would guess that, technically, if the other fellow is out of band, then it's not a valid contact for DXCC.? I have run into that with a DX station recently, when I zero-beat him I concluded he was 30 Hz low.? Now, my rig might not be exactly on frequency... my justification for counting the QSO was that at least PART of his signal was within the band.

Laugh if you will...

73 de Chuck, WS1L

On Tue, Mar 1, 2016 at 9:51 AM, 'Joe Subich, W4TV' lists@... [dxlab] <dxlab@...> wrote:
?


This morning 3XY1T was calling CQ (split) just a hundred (if that) Hz
or so below 24,890 for a while. Tuning to him - even when split with
the TX VFO in the band - caused Commander to blank the bandspread and
switch to the "out of band" color. Short of editing the Sub-Band
definition files to "extend" each band by 1 KHz, is there a way to:
(1) provide some tolerance on the band edges or (2) trigger the
blanking/out of band action based on the transmit frequency?

If not, could there be?

73,

... Joe, W4TV




--


===================
Chuck Chandler
===================
Join [email protected] to automatically receive all group messages.