开云体育

Ray, an older driver will not over right a newer driver. Windows will probably tell you that you already have a better driver installed but in actuality, it might nit be the one you need for your

Dean and others,, I've been digesting the several comments and suggestions, but haven't yet had the time to isolate them yet. Had an antenna demand some attention after a storm. I appreciate all the

Has anyone ?been successful uploading to a Baofeng UV-5R Plus? The radio goes into transmit mode when upload is attempted and then times out. ?Tried various releases including CHIP Legacy 20221217

Ray W4BYG said this is an FT-60? HT and the FT-60 only has 1 connector although it does have 4 terminals on that 1 connector. Some of you are referring to the 2 connector plug that is used on the

There are some cables that have a different spacing between the two connectors on the molded plug. It's possible that the cable has the wrong connector spacing on the plug. It might work with a hard

Yes. REALLY hard. 73, Alek VK6APK.

Ray, Push hard on the plug into the radio. Sometimes it looks good and even “clicks” but the two prong cable isn’t plugged in all the way. I and a friend both had the same issue on that

I think with the Prolific cable it's probably using a fake Prolific chip. That problem was so widespread they changed the driver to recognize the fakes and not work with them. Some will say in

Ray, I have to ask, when you have your cable plugged into the computer and you look at Device Manager and look at the comm port, is there a little yellow triangle next to it? I also suggest you select

Ray . . . We'll wait for someone who has had problem with that particular radio to reply, but is the radio supported in CHIRP-Next? If so, do you get the same error using it instead? I've had no

I have an solid and reliable Win7 PC and two FT6oRs. I would like to have matching entries in both radios. I loaded the "legacy" chirp software and manually loaded the needed driver. I identified the

Hi David. Since 23.10 is no longer supported, I decided to upgrade to 24.04. after doing so, I installed chirp and it runs flawlessly. I think 23.10 had some issue with GTK3 and/python. Anyway, the

i too am having the same issue so far nothing is working on chrip anyone have a solution?

I having issues with getting chirp to install on Ubuntu MATE 23.10. I have had it working on this very PC before I upgraded to 23.10. I completely removed chirp and python and followed the

You must not have downloaded the 'tarball' like I mentioned. The current one is ' chirp-20240706.tar.gz ( https://archive.chirpmyradio.com/chirp_next/next-20240706/chirp-20240706.tar.gz ) '. Once the

I was able to find them now.? Looks like the Anytone AT-778UV will support it.? Will have to check on other models.? Thanks for the help! 73 John AF5CC Sent using {0} ---- On Tue, 16

Hi Jim, I looked on the Chirp download page, after downloading and installing CHIRP, but couldn't find any of the test images for it??? 73 John AF5CC Sent using {0} ---- On Mon, 15

That is a great idea. I will try that.? I see the Anytone 778UV supports crossband operation in VFO mode, so it is usable on the satellites but it would be easier if you could store the different

Not a list, but most any 2 or more band models do. To make sure you could download the test image from the CHIRP repository (or extract it from the tarball available on the download page), load it

Thanks for the information Jim, is there a way to find out which radios would support this? 73 John AF5CC Sent using {0} ---- On Mon, 15 Jul 2024 19:15:42 -0500 Jim Unroe