开云体育

The codes 450 and 460 aren't found in CHIRP because they aren't found in the UV-5R. CHIRP cannot make a radio support a code that it isn't capable of supporting. The UV-5R, like most radios, only

Hey folks I'm not even sure this is the right place to ask my question but I can't seem to find the information I need anywhere on the net. I've been working on moving channel information from a

Neal, Thanks, and you described the issue much better than I did! The FT4XR is shown as supported on the chirp website, and I've found websites that talk about using chirp to program it, but nothing

Mike, I also purchased a FT-4xr last month and encountered an issue with Chirp that gives the error "Failed to communicate with radio: Incorrect ACK on serial port.".? I tried Chirp on Win10, Linux,

I bought a Yaesu FT-4Xr last month, but ran into errors reading from and writing to it with chirp.? I can read and write with the Yaesu software, but it's pretty bare bones (and I'm running it on

Thanks for the suggestions Donald.? I have the OEM ICOM cable.? Also checked volume and it made no difference.? ?But good suggestions. 73 -- Greg VA7BC Vancouver

To add to what I said, I found a forum thread on EEVBLOG that discusses the fake Prolific chips, and there seems to be a work-around, using an older driver intended for Win 7 64 bit. You would want

Greg . . . Two things come to mind. This is based on my experience with a Baofeng HT, but it might also apply to your radio. With some radios, you need to open the volume control enough to allow

The ICOM IC-2820H is on the list of supported rigs for CHIRP.? I was able to successfully download from the radio into my Windows 10 PC running CHIRP.? I could manipulate the .img file on CHIRP.?

The CHIRP 'Supported Radio Models' list is on the CHIRP home page ( https://chirp.danplanet.com/ ). The FRG-9600 is not on that

I read online that Chirp supports the Yaesu receiver? model FRG-9600. It is not however in the drop down list. I am a new user of Chirp. Are there other lists of radios supported? How does one go

If you have been able to utilize Chirp with the Yaesu receiver model FRG-9600 using the Yaesu FIF-232C interface I would like to message you with a few questions. Thank you for taking the time to read

Thanks for the very complete reply, Jim! So the band plan works as a sort of "tip sheet" to add? helpful defaults etc to the other settings. Will keep that in mind! Cheers, -- Durval.

Hi Donald, Sorry, forgot to set it up. Fixed now. Thanks for the tips. FTR, my radio is a Quansheng UV-K5, works with the volume at any point. -- Durval Menezes (no callsign yet, still waiting

What makes a difference is where in the world you are located. If you are in North America you want the North American Band Plan. It takes the IARU 2 band plan and adds data based on the ARRL band

Hello, name (?) . . . I never messed with that menu item. I don't think you need to change anything. Just download from the radio database, save the original state, then make changes as you wish,

Howdy everyone, just started using Chirp, latest version (20230810) under Win10 in case it makes a difference. As per the subject, can't see this menu option mentioned in the docs (nor anywhere

I did find a way to fix my issue. I copied the frequency column and pasted it to the Name column now my repeater list has two columns with frequencies in it but on my handheld the display shows

Btw I also found out that my early assessment that blank lines in my repeater list were a problem. They are not. I’m brand new to using and understanding spreadsheets.

I learned something new. Thanks!