开云体育

Simran Okay. Please note your inverted V is only expected to work well on one band, and if you cut it to a formula like 468 divided by frequency (in MHz, gives answer in feet, forgive me if you need

Hi Jean, In answer to one of your questions Ashar went over a couple of things in his video, one was the concept of a SDR contronolled uBitx which was basically bolting the Pi onto the front end of a

Greetings to all, More or less the same question here, plus also a few remarks and questions for Asshar I suppose. I sincerely hope that all is well in Hyderabad and that Asshar is able the pursue

Abhrajit das, Thank you for the test equipment information. Here is the video from Ashhar Farhan that I referenced before (I found it on

Test equipment MULTIMETER, antenna analyzer, soldering iron frequency counter and a AntUino from hfsignals. That type of equipment I have.

Abhrajit das (vu3yda) 4:32am #89336 ( /g/BITX20/message/89336 ) , Does the noise decrease when you turn down the volume control? An easy way to find which stage of the receiver is

As simple as that no rx [email protected]> wrote:

Yes sir volume is full, I have inverted V 40/20M and Dipole for 15M.well tune, low swr. When I put antenna then not increase noice level. No difference with antenna and without antenna. When my ears

Does the volume of noise increase/decrease with volume control? What test equipment do you have? What antenna are you using? - f

Hi, today I received ubitx v6.1 but audio is very low and no difference in noice with antenna and without antenna. It's transmit signal but nothing received. Please suggest what to do. Deep(vu3yda)

Hi Niels, Did you ever make any progress with this or get a board up and running ? Also did you source some 27Mhz crystals, if so which ones did you go for ? Thanks!

sounds nice.... so far i have put an inverted V. Very good RX. However no stations can hear me.... looks like a bad tuning or high swr issue so far i have not burnt the finals :D

Look up QRPGuys on Google - they have some EFHW kits - might be a help. Gerry Sent by the Thunderbird

From QST: "Wire Antennas for the Beginner" https://www.arrl.org/files/file/Technology/tis/info/pdf/0683033.pdf Also: "Antennas - The Easy

Well, if you give me a few days and contact me privately at djmalak2k6 at gmail. I can look at the api. I just want a way to see what they want so I can advise you of the best solution. Hosting will

Simian Here i use a small 2 element beam on 20,15,10m and verticals on the other bands, plus I sometimes use an end fed halfwave (EFHW) .? a dipole or EFHW certainty is a good antenna, if space is

Chris, Thanks for stepping up and offering to help.? I started looking at the API's available and they now all require a billing account to access.? While I am happy to keep renewing the domain I am

I’m a cyber security major with a masters degree. If an api exists, I would be happy to work on this. I’m disabled so time is not an issue for me. Chris KF4FTR

Hi, Got ubitx6 from hfsignals. Pretty happy with it. Very nice piece of technology I must say. Just wanted to understand with such qrp on voice, how far have you reached (considering present band

Excellent! [email protected]> wrote: