开云体育

Right, I did some DC measurements as follows:

Oscillator Transistor
E-7.02V
B-5.81V
C-11.91V

Amplifier Transistor
E-2.94V
B-3.61V
C-11.84V

Next I checked the scope probe and scope settings, Ashhar was spot on correct, the probe was set to x10 but the scope was expecting a x0.1 so when I changed the probe scale setting on the scope to x10 I got the correct 200mV output of the circuit :)

I knew the probe was set to x10 but I did not know that the scope also had an input scale setting..... Well never too old to learn

Thank you everyone for your help with this, as with most issues it is usually the simplest things that are mostly ignored?

73 Elia, M0ZHN