开云体育

Farhan, thanks for that update. Is there the re-cal needed? -P #5

Neil, The post the link points to was for the original sbitx DE V1, not the V2.? This was an early attempt to solve a similar issue with the DE versions resulting from hardware issues.? This

Hello Mark, I’ll have the whole Saturday off, maybe we can exchange ideas on how to make this work… I’m working on a RFT SEG15D. That radio have it’s own CW switching method, means when you

Hi Nir, This mode is used with applications such as FT8 and WJST-X (which is an external program). I currently run WJST-X routinely and yes you have to run in Digital mode. ?The RPi sound card is

Farhan Ok but it does. The build command compiles. The update command complains. Is there anther command to commit art pi@sbitx:~/sbitx $ ./build

I have one question related to this that I'm confused about. I definitely have what we would call an EARLY ver2 since I have serial 001. I have NOT performed the PA sequencing mod described here yet:

I'm getting this same thing.? Here is the SSH capture: pi@sbitx:~ $ cd sbitx pi@sbitx:~/sbitx $ ./update >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thu 08 Jun 2023 07:02:29 PM IST Updating

It shouldn't complain about hw_settings.ini. - f

There appears to be a bug in at least 1.2 that the "STOP function does not prohibit TX. This is true if you use STOP from the Nextion and also if you disable it via the Encoder ("Yellow Window")

tried to update mu sbitx v2 this morning and this the error I get using putty. Not sure what is meant by commit your changes. These are the commands I used cd sbitx ./update ./build sbitx Thu 08 Jun

The code is the same. The fixed FT8 works with web ui, not the native ui

Ash Har, Did you try it on ft8 on DE. After transmitting, it would go back to receive properly. -- Bob AA4FJ

Hello everyone! I’m trying to use uBitx firmware for another rig restoration, and I’m having issues with the CW mode… long story short: How can I disable TX line during CW and just get the

In the pull down Mode selection, We see "Digital". What is the purpose for this mode? Does it use the internal sound card, Or what are the benefits? Thank you Nir

Being software defined, it can transmit anywhere upto 30 MHz with single line changes in the hw_settings.ini. However, the LPFs will not have sufficient attenuation of harmonics. I would recommend an

Looks like the radio can transmit on 5Mhz. Can we? Or it is not recommended? Thanks Nir? 4X1FK

Bryce, I guess I was unclear on the instructions when using a signal generator.? You should not have any modulation, just a pure sine wave carrier.? To use the 1kHz offset, you set the generator

Good news!! Thanks Joe (VE1BWV)

HF Signals had stopped shipping for the last ten days pending this update. Yesterday, I tested out the update on developers edition too and the spike is gone there as well. - f

Hi, Just uploaded an instructional video on how -- if you have a spare Nano 3.0 -- you can try CDC V2 beta without risking your existing setup. Basically, you can install V2 on the second Nano and