开云体育

In the spring I purchased the Mobile radio and just recently I purchased the BT01 remove microphone. The radio has worked pretty much flawlessly since purchase. The BT01 however is acting strange. I

This radio appears to be a 2-band knock off of the Yaesu FT-8900.? I own both radios.? I'm curious if anyone has an AT-5888UV and has experimented with the USB port to determine if remote control

I attempted to post a earlier this morning & I had to shut my computer down due to a threat. So, please excuse me if I posted.? I am rather new to these forums. Question #1:? I have read the

Hi A friend is finding that when he transmits on analog there is an initial beep tone that like a 1 second delay How does he remove that? I can't find anything that does that but I am new to

I didn't think I'd find out how to do this but did a web search and I think I fund what I needed to do. I did a test on a "parrot" and can hear the playback just fine now. Apparently, some come from

When I plug in my Anytone speaker-mic into the radio (I bought the Anytone brand to make sure the plug was correct for the radio), the volume is very low. Besides the volume control knob, is there a

Hello, I have a D868UV? Hdwe Ver 1.00,? Firmware Ver 2.30.? I programmed it Jun 2018 with a codeplug for Central Ohio ARES operations. Analog works fine, no Digital activity.? I am wondering where

Update and great news? -? I emailed RT Systems tech support and they confirmed their AT-588 programming software works with all 3 versions of the radio - 2/222/440.? Once the software is connected

Hi Don, thanks for the heads up.? I should have mentioned I have that software but it doesn't work on the (apparently rare?) 222 MHz version of the 588.? I guess the 588 was also made for 2 and 440

Tad . . . I'm not sure how you missed it but I did a web search for these words: AT-588 anytone programming software and it was the first search

Anyone know where I can find programming software for this single band 222 MHz mobile? Thanks and 73, -- Tad Danley, K3TD

Oh, the hotkey fiasco again. This somehow got sent before I was finished. I'll start over from the important part. A friend sent me a codeplug. I read where you sometimes have to convert them using

OK. I found the problem. When trying to write to the radio, there's a pop-up dialog box with two checkboxes. I was leaving the top box (Digital Contacts List) unchecked and it failed every time. Once

Roy . . . You would think so, but that's how I did it and I still have this issue. I downloaded a package in a zip file, and it came with a CPS program along with lots of other things including the

The way the system works for the Anytone DMR radios is that once you update the radio with new firmware, the CPS program used to load that firmware is now out of date. This is why with each firmware

I am trying to program my Anytone 878 UV Plus with one analog FM channel. I was able to update the firmware OK through the com port, but I am getting an error: Check Connection. Retry? This is using

I bought this radio because of the FM CB feature at a two-way radio technician in Troy, Texas.? When I bought this unit, the technician also sold a 4 pin Astatic power microphone.? I did not realize

Questions on building first code plug for my AT878UV+. I'm traveling this summer around USA for about 3500km each way. I used repeaterbook search by highway and band and crossed radio reference to

Thanks, Laurence.

Yes you can. The 778 is quite friendly in this respect. One of the options for the soft buttons is VFO/MR, and it always goes back to where it was before with everything else