Roy . . .
On Sat, 20 Aug 2022 06:02:37 -0700, "BabbleBits" <royogborn@...> wrote:
This is why with each firmware release you should find with that firmware bundle a new matching version of the CPS software. Install that new CPS, export data from the old CPS and import it to the new, then discontinue using the old CPS.
You would think so, but that's how I did it and I still have this issue. I
downloaded a package in a zip file, and it came with a CPS program along with
lots of other things including the firmware. All in the same package. They made
it easy to do it the way you said it. The CPS program is 1.27 and the FW is
1.27. Both are in separate folders.
I was able to manually set up the two analog repeaters I'll use the most but we
have one that is to be installed that will support translation between DStar and
DMR and I'd like to be able to use it when it is installed.
Donald KX8K
----------------------------------------------------
Some ham radio groups you may be interested in:
/g/ICOM /g/Ham-Antennas/g/HamRadioHelp /g/Baofeng/g/CHIRP
