开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. APRSISCE
  2. Messages
Expanded Topics Messages Polls
Date
Auto following?

 

I use aprsisce pretty effectively as an igate (with limited gating of internet to RF for really local stations) but regularly new windows open and I find myself tracking maybe four or five stations from within europe that I have no prior knowledge of.

Clearly I have toggled something on or edited a setting file I should not have? Any suggestions?
Re: Help needed setting up FTM-300 with APRSIS32

 

Apologies for the misunderstanding Greg. I got a passcode from using M0NMA as the CallSign and put ?that into APRSIS. After a period when it says ‘APRSIS Connecting’ it changes to ‘APRSIS OK’ which I had assumed meant the passcode is valid, but I am not seeing anything being reported on APRS.fi, hence seeking help here.?

Steve
Re: Help needed setting up FTM-300 with APRSIS32

 

开云体育

To be clearer the ssid is not what I was talking about, the pass code is -1 on first run and needs changed.?



KB3KBR Greg. Sent from my Samsung Galaxy smartphone.



-------- Original message --------
From: "Steve marsh (M0NMA) via groups.io" <m0nma@...>
Date: 2/26/25 17:06 (GMT-05:00)
Subject: Re: [APRSISCE] Help needed setting up FTM-300 with APRSIS32

Thanks - I did get a passcode from one of the websites, but I suspect it may be invalid do have requested one through here.?

I used -1 for my mobile handy as I am already using 10,9 and 7 and wanted to tell the spots apart.?

Steve
Re: Help needed setting up FTM-300 with APRSIS32

 

Thanks - I did get a passcode from one of the websites, but I suspect it may be invalid do have requested one through here.?

I used -1 for my mobile handy as I am already using 10,9 and 7 and wanted to tell the spots apart.?

Steve
Re: Help needed setting up FTM-300 with APRSIS32

 

开云体育

32 is automatically an igate out of the box but you have to have a valid pass code to send to the internet. If it's -1 then you need to request one. -1 is for recieve only on the internet.?



KB3KBR Greg. Sent from my Samsung Galaxy smartphone.



-------- Original message --------
From: "Steve marsh (M0NMA) via groups.io" <m0nma@...>
Date: 2/26/25 12:52 (GMT-05:00)
Subject: [APRSISCE] Help needed setting up FTM-300 with APRSIS32

I am new to APRS and am trying to set up my FTM-300 so that it acts as an igate by feeding RF spots to ARRSIS and also so these are visible on aprs.fi
?
My FTM-300 is configured as M0NMA-9
APRSIS is set up as M0NMA-10
I am testing spots using an FT2D (M0NMA-1) handheld, beaconing on 50mW, so its range is very limited to avoid being spotted by other igates.
?
My FTM-300 is spotting M0NMA-1 as well as other traffic (mainly gateways like MB7UM and MB7VH).
?
On the map display I can see M0NMA-10, 9 and 1 displayed on the screen and I see RF spots appearing on the scroller (with asterisk), but only M0NMA-1. Earlier spots of M0NMA-1 are going through a portable igate (a Venus X1C5 Plus).
?
If I go on to APRS.fi, there is no sign of any spots, so I presume I need to do something to tell APRSIS to send the data it is seeing on to the internet?
?
Where do I need to look? I can't see anything obvious in the manual or the menus.
?
Thanks in advance
?
Steve M0NMA
?
?
Help needed setting up FTM-300 with APRSIS32

 

I am new to APRS and am trying to set up my FTM-300 so that it acts as an igate by feeding RF spots to ARRSIS and also so these are visible on aprs.fi
?
My FTM-300 is configured as M0NMA-9
APRSIS is set up as M0NMA-10
I am testing spots using an FT2D (M0NMA-1) handheld, beaconing on 50mW, so its range is very limited to avoid being spotted by other igates.
?
My FTM-300 is spotting M0NMA-1 as well as other traffic (mainly gateways like MB7UM and MB7VH).
?
On the map display I can see M0NMA-10, 9 and 1 displayed on the screen and I see RF spots appearing on the scroller (with asterisk), but only M0NMA-1. Earlier spots of M0NMA-1 are going through a portable igate (a Venus X1C5 Plus).
?
If I go on to APRS.fi, there is no sign of any spots, so I presume I need to do something to tell APRSIS to send the data it is seeing on to the internet?
?
Where do I need to look? I can't see anything obvious in the manual or the menus.
?
Thanks in advance
?
Steve M0NMA
?
?
Re: Forgot Passcode

 

Passcode sent offlist


On Wed, Feb 26, 2025 at 12:27?AM Mitch Mellen via <mellenmb=[email protected]> wrote:
MITCHELL MELLEN
KJ4UBX?




--


73 de
Steve Wilson
KF6WAX, APRSISCE32, ADMIN/MODERATOR
Forgot Passcode

 

MITCHELL MELLEN
KJ4UBX?
Re: APRSISCE/32 Passcode

 

Replied off list

73 de
Steve Wilson
KF6WAX, APRSISCE32, ADMIN/MODERATOR

On Sat, Feb 22, 2025 at 2:57?PM Jeffrey via <n9mxtham=[email protected]> wrote:
Good morning,
? ?Been years but finally reinstalled? APRSISCE/32???on this computer.? I think my passcode is 9347 is this correct?? If not can I obtain it again so that my station will show up.

Thanks

Jeffrey Dubin - N9MXT



--


73 de
Steve Wilson
KF6WAX, APRSISCE32, ADMIN/MODERATOR
APRSISCE/32 Passcode

 

Good morning,
? ?Been years but finally reinstalled? APRSISCE/32???on this computer.? I think my passcode is 9347 is this correct?? If not can I obtain it again so that my station will show up.

Thanks

Jeffrey Dubin - N9MXT
Re: Passcode Request

 

Sent off list


On Sun, Feb 16, 2025 at 7:03?PM Bill Diamond via <panamintbill=[email protected]> wrote:
Please provide a passcode for William E. Diamond, callsign K6KRQ.
--
Bill Diamond - K6KRQ
Sacramento, CA



--


73 de
Steve Wilson
KF6WAX, APRSISCE32, ADMIN/MODERATOR
Passcode Request

 

开云体育

Please provide a passcode for William E. Diamond, callsign K6KRQ.
--
Bill Diamond - K6KRQ
Sacramento, CA
Re: FTM-500 - Transmit from APRSIS32?

 

That's probably the route I'll go, was just hoping that the TNC in the FTM-500 was usable as, well, a TNC.
Re: passcode request

 

I am unable to verify the callsign you have supplied


On Fri, Feb 14, 2025 at 11:11?AM Masashi Akiyama via <jp1itn=[email protected]> wrote:
?Please kindly provide passcode for?APRSISCE/32??

Thank you for your kind support.

JN6JWN/Masashi Akiyama

--
JN6JWN Masashi Akiyama



--


73 de
Steve Wilson
KF6WAX, APRSISCE32, ADMIN/MODERATOR
passcode request

[email protected]
 

开云体育

?Please kindly provide passcode for?APRSISCE/32??

Thank you for your kind support.

JN6JWN/Masashi Akiyama

--
JN6JWN Masashi Akiyama
Re: FTM-500 - Transmit from APRSIS32?

 

It was specifically NOT possible with the FTM-350.

Hal
N3YX

On Feb 13, 2025, at 4:08?PM, Matt L via groups.io <mattlaudato@...> wrote:

curious if others know whether this is possible (and/or with earlier radios in the FTM family).
Re: Passcode for APRSISCE/32

 

Passcode sent offlist
?
Passcode for APRSISCE/32

 

Christopher J. Vezeau
W1CJV
Need a passcode for APRSISCE/32

Thanks

Sent from Proton Mail Android
Re: FTM-500 - Transmit from APRSIS32?

 

开云体育

The Yaesu line if radios will only out put Aprs. There is no access to the internal tnc. A work around is to have an external tnc attached on the data port and use that. This is what I'm doing with my home station. Aprsis32> TT4> FTM-400. The TT4 is locked in kiss and does the digipeating for the station. Aprsis32 handles gate traffic in and out. The 400s internal tnc is still on and still recieves packets and can transmit too.?



KB3KBR Greg. Sent from my Samsung Galaxy smartphone.



-------- Original message --------
From: "Matt L via groups.io" <mattlaudato@...>
Date: 2/13/25 19:31 (GMT-05:00)
Subject: Re: [APRSISCE] FTM-500 - Transmit from APRSIS32?

Putting thee data in thine mic jack!
Re: FTM-500 - Transmit from APRSIS32?

 

Putting thee data in thine mic jack!
81 - 100 of 38211