32 is automatically an igate out of the box but you have to have a valid pass code to send to the internet. If it's -1 then you need to request one. -1 is for recieve only on the internet.?
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
toggle quoted message
Show quoted text
-------- Original message --------
From: "Steve marsh (M0NMA) via groups.io" <m0nma@...>
Date: 2/26/25 12:52 (GMT-05:00)
Subject: [APRSISCE] Help needed setting up FTM-300 with APRSIS32
I am new to APRS and am trying to set up my FTM-300 so that it acts as an igate by feeding RF spots to ARRSIS and also so these are visible on aprs.fi
?
My FTM-300 is configured as M0NMA-9
APRSIS is set up as M0NMA-10
I am testing spots using an FT2D (M0NMA-1) handheld, beaconing on 50mW, so its range is very limited to avoid being spotted by other igates.
?
My FTM-300 is spotting M0NMA-1 as well as other traffic (mainly gateways like MB7UM and MB7VH).
?
On the map display I can see M0NMA-10, 9 and 1 displayed on the screen and I see RF spots appearing on the scroller (with asterisk), but only M0NMA-1. Earlier spots of M0NMA-1 are going through a portable igate (a Venus X1C5 Plus).
?
If I go on to APRS.fi, there is no sign of any spots, so I presume I need to do something to tell APRSIS to send the data it is seeing on to the internet?
?
Where do I need to look? I can't see anything obvious in the manual or the menus.
?
Thanks in advance
?
Steve M0NMA
?
?
