Everyone is using the same version?
|
Well, I can confirm that nothing has changed in the KISS-over-TCP
nor Simply(KISS) port of APRSIS32!
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 10/17/2024 7:21 PM, N3MEL - Glenn
wrote:
toggle quoted message
Show quoted text
Yes going to as well, though I would try here since I am using
APRSIS32.?
Thank you.?
--
Apologies for any grammar or spelling errors!
--
73 de Glenn Allison N3MEL
(tprfn) The Packet Radio Forwarding Network
EPA Hub Station
?
Emergency Coordinator
Chester County ARES/RACES
Sent from my?iPhone
On October 17, 2024 at
7:06:34 PM, Lynn Deffenbaugh via (kj4erj@...)
wrote:
Seem like this would be better asked in a VARA
support group and
not APRSIS32.?? If there is such a group?
Lynn (D) - KJ4ERJ - Author of
APRSISCE
for Windows Mobile and Win32
On 10/17/2024 6:39 PM,
N3MEL - Glenn
wrote:
There is a group of us testing VARA HF on 40m
daytime and 80
nights, and although we can see each others signal
in the waterfall
of VARA nothing is printing for any of us.?
We had this working 8 or 9 months ago, but not
now. Has
something changed with the Kiss Port in VARA?
--
Apologies for any grammar or spelling errors!
--
73 de Glenn Allison N3MEL
(tprfn) The Packet Radio Forwarding Network
EPA Hub Station
?
Emergency Coordinator
Chester County ARES/RACES
Sent from my?iPhone
|
Yes going to as well, though I would try here since I am using APRSIS32.?
Thank you.? -- Apologies for any grammar or spelling errors! -- 73 de Glenn Allison N3MEL (tprfn) The Packet Radio Forwarding Network EPA Hub Station ? Emergency Coordinator Chester County ARES/RACES
Sent from my?iPhone
On October 17, 2024 at 7:06:34 PM, Lynn Deffenbaugh via ( kj4erj@...) wrote:
Seem like this would be better asked in a VARA support group and
not APRSIS32.?? If there is such a group?
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 10/17/2024 6:39 PM, N3MEL - Glenn
wrote:
There is a group of us testing VARA HF on 40m daytime and 80
nights, and although we can see each others signal in the waterfall
of VARA nothing is printing for any of us.?
We had this working 8 or 9 months ago, but not now. Has
something changed with the Kiss Port in VARA?
--
Apologies for any grammar or spelling errors!
--
73 de Glenn Allison N3MEL
(tprfn) The Packet Radio Forwarding Network
EPA Hub Station
?
Emergency Coordinator
Chester County ARES/RACES
Sent from my?iPhone
|
Seem like this would be better asked in a VARA support group and
not APRSIS32.?? If there is such a group?
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 10/17/2024 6:39 PM, N3MEL - Glenn
wrote:
toggle quoted message
Show quoted text
There is a group of us testing VARA HF on 40m daytime and 80
nights, and although we can see each others signal in the
waterfall of VARA nothing is printing for any of us.?
We had this working 8 or 9 months ago, but not now. Has
something changed with the Kiss Port in VARA?
--
Apologies for any grammar or spelling errors!
--
73 de Glenn Allison N3MEL
(tprfn) The Packet Radio Forwarding Network
EPA Hub Station
?
Emergency Coordinator
Chester County ARES/RACES
Sent from my?iPhone
|
There is a group of us testing VARA HF on 40m daytime and 80 nights, and although we can see each others signal in the waterfall of VARA nothing is printing for any of us.?
We had this working 8 or 9 months ago, but not now. Has something changed with the Kiss Port in VARA? -- Apologies for any grammar or spelling errors! -- 73 de Glenn Allison N3MEL (tprfn) The Packet Radio Forwarding Network EPA Hub Station ? Emergency Coordinator Chester County ARES/RACES
Sent from my?iPhone
|
I found an old WebDT366 tablet with a mechanically damaged touch screen. I ordered a new AMT9507 touch screen for it. Unfortunately, it seems to be the wrong version of the screen because the connections are swapped, and the cursor behaves completely erratically when touched. Does anyone know what the correct type of touch screen is?
?
73, Chris
|
|
|
Already sent offlist
?
73
Steve,? KF6WAX
|
I need the passcode to useAPRSIS32? Pl advice? 73 Balu?
|
Thanks 4 ??? Enviado desde mi iPhone
toggle quoted message
Show quoted text
El 13 oct 2024, a las 1:00, Lynn Deffenbaugh <kj4erj@...> escribió:
?
Request was made on 10/11 2:21pm and a passcode response was sent
at 3:49pm.? You may need to check your spam folder.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
Hello group,
?
I recently
hooked up my old Kantronics KPC3+ & wanted to use
APRSISCE. I went to the ()
?& sent passcode request, but have never received a reply.
Is there another way to obtain the passcode?
?
Thanks,
James N8KDX
|
Re: Are passcodes still available?
>We try, but e-mail is not 100% guaranteed!? There's always something that can go worng (sic).
Funny. Thanks for providing assistance.
Mike K6MFW
|
Re: Are passcodes still available?
Your second request for a passcode was received at 11:37 today
and a response was sent at 12:45pm indicating that the passcode
had already been sent.
But that probably doesn't matter because I also see that you've
unsubscribed from the group at 6:45pm today.
Remember folks, we have HUMANS working the passcode responses.?
This is because the APRS-IS guidelines at
says (emphasis their's):
passcode=computed
passcode for your callsign. -1 is used for receive-only.?It
is the responsibility of each software author to provide the
proper passcode to their individual users on a request basis.?This
is to aid in keeping APRS-IS restricted to amateur radio use
only.
So please give us some consideration and rest assured that
responses DO get sent.? Sometimes they end up in spam folders,
and, believe it or not, sometimes the responses actually bounce
back to us because the requesting address has extensive "I don't
accept e-mail from anyone that's not in my contact list"
protections on their account. ? winlink.com and outlook.com are
especially famous for rejecting our responses.?? gmail.com rejects
any e-mail coming from @arrl.net (give it a try yourself), so
sometimes we need to modify the address from which we respond.
We try, but e-mail is not 100%
guaranteed!? There's always something that can go worng (sic).
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and
Win32
PS.? And the best part of this whole
thing is that a passcode is only required for injecting packets to
the APRS-IS and is not required to "setup my KPC3+ TNC", unless
you really mean that you're trying to set up an IGate using your
KPC3+?
Hello group,
?
I followed directions from the wiki site to request a
passcode for APRSISCE32. I've also emailed the group owner here.
Never got a reply. I wanted to setup my KPC3+ TNC at home.
?
Is it still possible to get a passcode??
?
Name: James Quinn
Callsign: N8KDX
?
Thanks
?
|
Request was made on 10/11 2:21pm and a passcode response was sent
at 3:49pm.? You may need to check your spam folder.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
toggle quoted message
Show quoted text
Hello group,
?
I recently
hooked up my old Kantronics KPC3+ & wanted to use
APRSISCE. I went to the ()
?& sent passcode request, but have never received a reply.
Is there another way to obtain the passcode?
?
Thanks,
James N8KDX
|
Are passcodes still available?
Hello group,
?
I followed directions from the wiki site to request a passcode for APRSISCE32. I've also emailed the group owner here. Never got a reply. I wanted to setup my KPC3+ TNC at home.
?
Is it still possible to get a passcode??
?
Name: James Quinn
Callsign: N8KDX
?
Thanks
?
|
Hello group, ? I recently hooked up my old Kantronics KPC3+ & wanted to use APRSISCE. I went to the (http://aprsisce.wikidot.com/doc:passcode) ?& sent passcode request, but have never received a reply. Is there another way to obtain the passcode? ? Thanks, James N8KDX
|
Re: Trying to get APRSIS32 to work with a Microsat WX3in1 Plus 2.0 on the RF side.
What port type are you using in APRSIS32 for the WX3in1???
Hopefully it's Simply(KISS) and the WX3in1 is locked in KISS mode?
You can also bring up the Port(<YourPortName>) trace log
and enable it to see what might be going on.
If you have a Quiet Time enabled on the port, make sure it is
longer than the longest time you'd expect between received packets
in your local area.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
PS.? What callsign-SSID do you have
assigned to the APRSIS32 instance and the WX3in1?? Hopefully they
are each unique.
On 10/7/2024 11:11 PM, Tony/W3TAC via
groups.io wrote:
toggle quoted message
Show quoted text
Good Morning,
?
I'm testing a WX3in1 running as an APRS I-Gate W3TAC-1 with
digipeater-off. Everything appears to work on the
TCPIP/internet/APRS.FI side.? My half wave antenna is only 18
inches off the ground so I don't expect to get out (10 watts)
very well on xmit but it works well enough for testing.?
?
The status box on upper left side of APRSIS32 flashes between
"APRIS-OK" and "WX3in1 KISS-OK" but about every 6 seconds
something quickly flashes so fast in the background I can't read
it but I think it says something like WX3in1 KISS OPN CMD? With
the scroller set to RF only no stations show up in the left
column but plenty of APRS-IS stations show up on the map from
the internet side.?
?
The WX3in1 is in the basement feeding the router upstairs via
Cat-5 cable. Been working this for weeks and starting to think
the WX3in1 is not compatible with APRSIS32. Anybody get their
WX3in1 working with APRSIS32??
?
Tony
|
Trying to get APRSIS32 to work with a Microsat WX3in1 Plus 2.0 on the RF side.
Good Morning,
?
I'm testing a WX3in1 running as an APRS I-Gate W3TAC-1 with digipeater-off. Everything appears to work on the TCPIP/internet/APRS.FI side.? My half wave antenna is only 18 inches off the ground so I don't expect to get out (10 watts) very well on xmit but it works well enough for testing.?
?
The status box on upper left side of APRSIS32 flashes between "APRIS-OK" and "WX3in1 KISS-OK" but about every 6 seconds something quickly flashes so fast in the background I can't read it but I think it says something like WX3in1 KISS OPN CMD? With the scroller set to RF only no stations show up in the left column but plenty of APRS-IS stations show up on the map from the internet side.?
?
The WX3in1 is in the basement feeding the router upstairs via Cat-5 cable. Been working this for weeks and starting to think the WX3in1 is not compatible with APRSIS32. Anybody get their WX3in1 working with APRSIS32??
?
Tony
|
Re: Help setting up I-gate - FTM-500
Lynn,
?
Thanks for the reply. Sorry I'm a little late responding, but I developed a high fever yesterday. Uggg:-(
I will look at your suggestions and do a little more troubleshooting.
?
Rick, you may be right, that's the reason I mentioned it in my post. Hope to find a solution, need an igate in my area.
?
Best
Brent
KQ4LMY
|
Re: Help setting up I-gate - FTM-500
?I’m not sure Starlink will allow you to pass traffic to it. I don’t think the router will allow it. I’ve had the same issues with Echolink.?
Rick N9NWI
toggle quoted message
Show quoted text
On Oct 6, 2024, at 4:37?PM, Lynn Deffenbaugh <kj4erj@...> wrote:
?
Correction, that log doesn't necessarily show that packets were
gated, but only that RF packets were received on an RF-looking
port by an APRSIS32 instance called KQ4LMY.
And in that log I see that you also have a KQ4LMY-9 which is
likely a Yaesu FTM-300D, at least according to the Mic-E type
indicator characters in the packets.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 10/6/2024 5:32 PM, Lynn Deffenbaugh
wrote:
I searched some of my logs and find that you DID gate some
packets to the APRS-IS, but you are running your APRSIS32
instance as KQ4LMY which is the same as your radio.? For
debugging issues, and avoiding confusion, it is best that ever
single APRS "thing", be it hardware, software, or firmware, uses
a unique -SSID to allow for knowing what is doing what to whom
and when.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
New to aprs and trying to setup my FTM-500 in my house as
an I-gate With aprisce32. I can't seem to get RF received on
my station to forward to APRS-IS, at least, I can't see any
traffic showing up in my area on APRS-FI.
I am receiving traffic and it shows in APRSIS on my
computer. I can see my mobile KQ4LMY-9, beaconing in my
driveway, but it doesn't show on an online map. My home
station shows on aprs-fi, but it is being seen by a
digi-peater 35mi away to the NE or another 33 miles to the SW.
?
FTM-500 is connected to computer via Yaesu SCU-56 cable.
Made FTM-500 port using FTM-350 setting. Internet is provided
via starlink.
?
Log files are attached. Any help would be appreciated.
?
Thanks,
Brent
KQ4LMY
|
Re: Help setting up I-gate - FTM-500
Correction, that log doesn't necessarily show that packets were
gated, but only that RF packets were received on an RF-looking
port by an APRSIS32 instance called KQ4LMY.
And in that log I see that you also have a KQ4LMY-9 which is
likely a Yaesu FTM-300D, at least according to the Mic-E type
indicator characters in the packets.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 10/6/2024 5:32 PM, Lynn Deffenbaugh
wrote:
toggle quoted message
Show quoted text
I searched some of my logs and find that you DID gate some
packets to the APRS-IS, but you are running your APRSIS32
instance as KQ4LMY which is the same as your radio.? For
debugging issues, and avoiding confusion, it is best that ever
single APRS "thing", be it hardware, software, or firmware, uses
a unique -SSID to allow for knowing what is doing what to whom
and when.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
New to aprs and trying to setup my FTM-500 in my house as
an I-gate With aprisce32. I can't seem to get RF received on
my station to forward to APRS-IS, at least, I can't see any
traffic showing up in my area on APRS-FI.
I am receiving traffic and it shows in APRSIS on my
computer. I can see my mobile KQ4LMY-9, beaconing in my
driveway, but it doesn't show on an online map. My home
station shows on aprs-fi, but it is being seen by a
digi-peater 35mi away to the NE or another 33 miles to the SW.
?
FTM-500 is connected to computer via Yaesu SCU-56 cable.
Made FTM-500 port using FTM-350 setting. Internet is provided
via starlink.
?
Log files are attached. Any help would be appreciated.
?
Thanks,
Brent
KQ4LMY
|
N3MEL - Glenn
R.R. Balasundaram VU2RTF