What port type are you using in APRSIS32 for the WX3in1???
Hopefully it's Simply(KISS) and the WX3in1 is locked in KISS mode?
You can also bring up the Port(<YourPortName>) trace log
and enable it to see what might be going on.
If you have a Quiet Time enabled on the port, make sure it is
longer than the longest time you'd expect between received packets
in your local area.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
PS.? What callsign-SSID do you have
assigned to the APRSIS32 instance and the WX3in1?? Hopefully they
are each unique.
On 10/7/2024 11:11 PM, Tony/W3TAC via
groups.io wrote:
toggle quoted message
Show quoted text
Good Morning,
?
I'm testing a WX3in1 running as an APRS I-Gate W3TAC-1 with
digipeater-off. Everything appears to work on the
TCPIP/internet/APRS.FI side.? My half wave antenna is only 18
inches off the ground so I don't expect to get out (10 watts)
very well on xmit but it works well enough for testing.?
?
The status box on upper left side of APRSIS32 flashes between
"APRIS-OK" and "WX3in1 KISS-OK" but about every 6 seconds
something quickly flashes so fast in the background I can't read
it but I think it says something like WX3in1 KISS OPN CMD? With
the scroller set to RF only no stations show up in the left
column but plenty of APRS-IS stations show up on the map from
the internet side.?
?
The WX3in1 is in the basement feeding the router upstairs via
Cat-5 cable. Been working this for weeks and starting to think
the WX3in1 is not compatible with APRSIS32. Anybody get their
WX3in1 working with APRSIS32??
?
Tony
