Re: Can you receive and store messages with aprs?

开云体育

You can check messages pending by going to MAIL in the to section and type APRSM, then when it connects will let you know if you have any pending. Here is a screenshot:

John Madden

N4EJM

DMR ID 3165878

Hamshack Hotline 6102039

Show quoted text

On Aug 10, 2024, at 6:08?PM, John Madden via groups.io <n4ejm2019@...> wrote:

?Sent you a test on both of your -1 stations.

John Madden
N4EJM
DMR ID 3165878
Hamshack Hotline 6102039

On Aug 10, 2024, at 6:04?PM, John Madden via groups.io <n4ejm2019@...> wrote:

?It’s the MAIL server on APRS. Yes it is two way. Just use Mail in the to section and put @N4EJM(for example) then the message. It’ll tell you if the message was sent to the designated call sign. You can use the SSID if you want but not sure it’s necessary.

John Madden
N4EJM
DMR ID 3165878
Hamshack Hotline 6102039

On Aug 10, 2024, at 7:56?AM, Demetre - SV1UY (M0SUY) via groups.io <demetre.sv1uy@...> wrote:

?Hi John,

Could you elaborate about the MAIL store and forward please?
How is it done? Is it two way or one way only? Also is there an Internet server that does this?
Could you give us an example? I would love to know how it is done!

--
73 de Demetre - SV1UY (M0SUY)
INTERNET e-mail: demetre.sv1uy@...
RADIO e-mail: SV1UY?or M0SUY via WINLINK
QRV PACTOR 14109 kHz CF (14107.5 kHz USB Dial)
οr VarAC for VMAIL on 14105 kHz USB Dial
WEB: https://www.qsl.net/sv1uy ( http://www.qsl.net/sv1uy )
APRS: Best Social Network for Radio Amateurs

Re: Can you receive and store messages with aprs?

#37827

开云体育

Sent you a test on both of your -1 stations.

John Madden

N4EJM

DMR ID 3165878

Hamshack Hotline 6102039

Show quoted text

On Aug 10, 2024, at 6:04?PM, John Madden via groups.io <n4ejm2019@...> wrote:

?It’s the MAIL server on APRS. Yes it is two way. Just use Mail in the to section and put @N4EJM(for example) then the message. It’ll tell you if the message was sent to the designated call sign. You can use the SSID if you want but not sure it’s necessary.

John Madden
N4EJM
DMR ID 3165878
Hamshack Hotline 6102039

On Aug 10, 2024, at 7:56?AM, Demetre - SV1UY (M0SUY) via groups.io <demetre.sv1uy@...> wrote:

?Hi John,

Could you elaborate about the MAIL store and forward please?
How is it done? Is it two way or one way only? Also is there an Internet server that does this?
Could you give us an example? I would love to know how it is done!

--
73 de Demetre - SV1UY (M0SUY)
INTERNET e-mail: demetre.sv1uy@...
RADIO e-mail: SV1UY?or M0SUY via WINLINK
QRV PACTOR 14109 kHz CF (14107.5 kHz USB Dial)
οr VarAC for VMAIL on 14105 kHz USB Dial
WEB: https://www.qsl.net/sv1uy ( http://www.qsl.net/sv1uy )
APRS: Best Social Network for Radio Amateurs

Re: Can you receive and store messages with aprs?

#37826

开云体育

It’s the MAIL server on APRS. Yes it is two way. Just use Mail in the to section and put @N4EJM(for example) then the message. It’ll tell you if the message was sent to the designated call sign. You can use the SSID if you want but not sure it’s necessary.

John Madden

N4EJM

DMR ID 3165878

Hamshack Hotline 6102039

Show quoted text

On Aug 10, 2024, at 7:56?AM, Demetre - SV1UY (M0SUY) via groups.io <demetre.sv1uy@...> wrote:

?Hi John,

Could you elaborate about the MAIL store and forward please?
How is it done? Is it two way or one way only? Also is there an Internet server that does this?
Could you give us an example? I would love to know how it is done!

--
73 de Demetre - SV1UY (M0SUY)
INTERNET e-mail: demetre.sv1uy@...
RADIO e-mail: SV1UY?or M0SUY via WINLINK
QRV PACTOR 14109 kHz CF (14107.5 kHz USB Dial)
οr VarAC for VMAIL on 14105 kHz USB Dial
WEB: https://www.qsl.net/sv1uy ( http://www.qsl.net/sv1uy )
APRS: Best Social Network for Radio Amateurs

Re: Can you receive and store messages with aprs?

#37825

Hi John,

Could you elaborate about the MAIL store and forward please? 
How is it done? Is it two way or one way only? Also is there an Internet server that does this? 
Could you give us an example? I would love to know how it is done!

-- 
73 de Demetre - SV1UY (M0SUY)
INTERNET e-mail: demetre.sv1uy@...
RADIO e-mail: SV1UY?or M0SUY via WINLINK
QRV PACTOR 14109 kHz CF (14107.5 kHz USB Dial)
οr VarAC for VMAIL on 14105 kHz USB Dial
WEB:  (  )
APRS: Best Social Network for Radio Amateurs

Re: Can you receive and store messages with aprs?

#37824

开云体育

Check out APRS.wiki you can opt in to use it with both sms and mail. Mail is store and forward I know that. Not sure if SMS acts the same way.

John Madden

N4EJM

DMR ID 3165878

Hamshack Hotline 6102039

Show quoted text

On Aug 10, 2024, at 6:59?AM, Demetre - SV1UY (M0SUY) via groups.io <demetre.sv1uy@...> wrote:

?Hi Hank,

Yes it does if you use UI-View and an add-on called UI-Store & Forward. There is also a UI-BBS which works as a Bulletin Board.
You can find this information here: https://www.apritch.co.uk/addon_uiview32.htm

I wish other developers (hint to Lynn Deffebaugh) would add this facility to their APRS Software because unfortunately G4IDE, author of UI-View is SK. Still there are many people still interested in UI-View and all it's add-ons and they keep UI-View alive.

--
73 de Demetre - SV1UY (M0SUY)
INTERNET e-mail: demetre.sv1uy@...
RADIO e-mail: SV1UY?or M0SUY via WINLINK
QRV PACTOR 14109 kHz CF (14107.5 kHz USB Dial)
οr VarAC for VMAIL on 14105 kHz USB Dial
WEB: https://www.qsl.net/sv1uy ( http://www.qsl.net/sv1uy )
APRS: Best Social Network for Radio Amateurs

Re: Can you receive and store messages with aprs?

#37823

Hi Hank,

Yes it does if you use UI-View and an add-on called UI-Store & Forward. There is also a UI-BBS which works as a Bulletin Board.
You can find this information here: 

I wish other developers (hint to Lynn Deffebaugh) would add this facility to their APRS Software because unfortunately G4IDE, author of UI-View is SK. Still there are many people still interested in UI-View and all it's add-ons and they keep UI-View alive.

-- 
73 de Demetre - SV1UY (M0SUY)
INTERNET e-mail: demetre.sv1uy@...
RADIO e-mail: SV1UY?or M0SUY via WINLINK
QRV PACTOR 14109 kHz CF (14107.5 kHz USB Dial)
οr VarAC for VMAIL on 14105 kHz USB Dial
WEB:  (  )
APRS: Best Social Network for Radio Amateurs

Re: Can you receive and store messages with aprs?

Lynn Deffenbaugh

#37822

开云体育

I do not know of a store-and-forward feature for APRS at this time.?? I seem to recall that someone was working on a mailbox-like feature, but I'm not sure now where I read about it or how it was going to work.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 8/9/2024 3:24 PM, Hank Tyler wrote:

Show quoted text

Suppose you are using an RF only setup and send a message to someone who is not on the air at the moment. Does aprs have the capability to send a message to that person and have it stored somehow for later retrieval by that person?

?

Thanks!

Can you receive and store messages with aprs?

Hank Tyler

#37821

Suppose you are using an RF only setup and send a message to someone who is not on the air at the moment. Does aprs have the capability to send a message to that person and have it stored somehow for later retrieval by that person?

?

Thanks!

Re: Sending Telemetry?

#37820

On Wed, Jul 31, 2024 at 12:24 AM, Greg D wrote:

Hi Rob,

... Having something easy to access could make APRS all that more useful by lowering the barrier to entry for general telemetry, and I figure we don't need everyone hacking their own programs to shovel data to the IS, with all the chaos that could (and has) caused.? There's a huge difference between logging data to a text file and properly interfacing with the world-wide APRS IS system.? But again, if there is a well-written Python library, perhaps this need has been answered already?

{shrug}

Greg? KO6TH

If you create any monitoring device that acts like a TNC and given a distinct CALL-SSID, you would connect to APRSIS32 as an RF port or configure APRSIS32 as a local IS-server and connect through it.? This gives you the best of both worlds.? I am not sure APRSIS32 does cross port (RF) digi-peating, so the local IS-server might be the better interface.? Even that might take some special filtering. ?Again, the device would need to do the packet creation. ?

?

There are APRS libraries for Python and/or Arduino.? Also, sample project code for each.

One example would be "trackuino" (TX only) as a starting point.? I believe it was written for balloons or rockets so has Telemetry packet source code to look at.?

You could strip out GPS and other portions that aren't needed.? I've messed with this a bit, but not to put together any type project.??

?

I am not sure why your Arduino project for monitoring the couple of devices is having issues.? From your comments, it appears you are not reading any values directl;y through the processor ADC.??Maybe because it is coming in through serial.? Timing is critical for serial decoding.? Are you using Software Serial??

?

For a couple of my projects (mainly Icom CI-V work), I had to swap the Software serial (SWS) to debug and hardware serial (HWS) ports for device interfacing (CI-V).? For me software serial didn't handle the 2-stop bits, so hardware serial was needed.? I found the Arduino HW serial port handled things much better.? I also changed the 'debug' sending out the SWS port to only sending every second or so.? Eventually, I moved to a Arduino ProMicro which has a separate hardware serial input.?

?

Or if you need more processor power try a STM32 BluePill (or BlackPill).? I just started messing with them myself.??

Just a few thoughts ...

?

Not sure this is exactly an APRS-IS thread any more though (other than interfacing like the RF or local server port comments).

Good luck! if you decide to act on this more.

-------

Robert Giuliano

KB8RCO

?

Re: Sending Telemetry?

#37819

开云体育

Hi Rob,

The idea came up during a club breakfast conversation with another ham.? He was noting that he could bring up his home's solar production report on his cell phone, and I noted that I sometimes check the outside temperature by looking at my home weather station's APRSIS32-based reporting via aprs.fi.? I have a small off-grid solar system for when the power goes out, so, the thought went, why not tie my solar data into APRSIS32 as well?

The first thought was that the weather station's computer interface (WeeWx) is a simple Python script, so perhaps I could modify it to hijack a couple of the weather station data fields and substitute the Solar data?? Nah...

Your suggestion to replace the Arduino with a Pi-zero could definitely work, and would definitely have advantages.? The Arduino is pretty full, capturing, parsing, and displaying the Victron serial port's telemetry.? Two devices worth - the charge controller and a sine wave inverter - and it crashes every few days.? No idea why.? That said, its purpose was only to provide a visual display of system status, which Victron normally supplies through a much more expensive solution.? The other manufacturers of solar controllers and inverters tend to put displays directly on their devices, but I needed a product that was known to be RF-quiet and compact in size.? Making use of the serial port was just a way to be cheap and have some fun with the Arduino, while enabling me to use the Victron equipment.? I could use a Bluetooth app on my cell phone, but in a power outage situation, I didn't want to rely on it.

The down-side of having a Pi generate the IS traffic was what I was hoping to avoid by using APRSIS32, that of formatting APRS packets.? I know and appreciate what Lynn had to go through in deciphering the APRS spec, and didn't relish the idea of repeating his experience.? Lynn's summary corrected some of my misgivings, besides that APRSIS32 doesn't offer the feature I was looking for.? I'm also guessing that by now there's probably a Python library somewhere that would do the heavy lifting.? Your idea is something to consider.

To answer your question, yes there would need to be a small program or script that would periodically read from a serial port and write a string of numbers to the telem.txt file, something I've done before.? Just like with the weather station wxnow.txt interface, the data would be scooped up by APRSIS32, formatted for APRS, and forwarded to the active ports.? One thing I'd lose by not using something like APRSIS32 is that the RF world wouldn't see the data directly.? It's not a huge deal for me, but others wanting to use such a facility might appreciate the full APRS experience that a proper, modern APRS client would provide.? Having something easy to access could make APRS all that more useful by lowering the barrier to entry for general telemetry, and I figure we don't need everyone hacking their own programs to shovel data to the IS, with all the chaos that could (and has) caused.? There's a huge difference between logging data to a text file and properly interfacing with the world-wide APRS IS system.? But again, if there is a well-written Python library, perhaps this need has been answered already?

{shrug}

Greg? KO6TH

Rob Giuliano via groups.io wrote:

Show quoted text

Greg,

I am curious what you would use to create the "telem.txt" file that APRSIS32 would read and send as a Telemetry packet?

?

From your description, you would need a terminal emulator (like TeraTerm) or a "home brew" application to read the serial stream and save it to a file.

If you swapped out your Arduino for a Pi (say Pi Zero W) and used a I2C Analog to Digital Converted (much better than the Arduino built in), then Pi could send the data to APRS-IS.

NOTE:? you could use an I2C LCD as well.?

?

Another option would be to send the data from the Arduino to "a Pi" (or other computer) over serial in something like a JSON format through the command line and feed it into a home brew application to parse it and send the packet.? It would look something like:

?? $ cat dev/ttyS0 | mytelem

where mytelem is a executable that takes command line data, parses it, generates a telemetry packet and sends it to APRS-IS (after login and passcode are sent).

?

Just some thoughts.

-------

Robert Giuliano

KB8RCO

Re: Sending Telemetry?

#37818

Greg,

I am curious what you would use to create the "telem.txt" file that APRSIS32 would read and send as a Telemetry packet?

?

From your description, you would need a terminal emulator (like TeraTerm) or a "home brew" application to read the serial stream and save it to a file.

If you swapped out your Arduino for a Pi (say Pi Zero W) and used a I2C Analog to Digital Converted (much better than the Arduino built in), then Pi could send the data to APRS-IS.

NOTE:? you could use an I2C LCD as well.?

?

Another option would be to send the data from the Arduino to "a Pi" (or other computer) over serial in something like a JSON format through the command line and feed it into a home brew application to parse it and send the packet.? It would look something like:

?? $ cat dev/ttyS0 | mytelem

where mytelem is a executable that takes command line data, parses it, generates a telemetry packet and sends it to APRS-IS (after login and passcode are sent).

?

Just some thoughts.

-------

Robert Giuliano

KB8RCO

Re: Sending Telemetry?

Lynn Deffenbaugh

#37817

Believe it or not, the wxnow.txt file is already formatted for APRS transmission.?? I really don't see any value that APRSIS32 would add to telemetry unless it was actually sourcing the raw values.?? By the time the actual data collector formatted something for APRSIS32 to relay on through, said collector could just as easily have done the whole thing.?? Because to be complete, even the definitions would have to come from outside, so if it's all coming from outside, why not deliver it directly to the APRS-IS?

Similar to the recent traffic of people polling the aprs.fi API to get near-real-time data for local displays when they could just as easily (and with fewer points of failure) make their own connection to the APRS-IS to get the original data in realtime.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

Show quoted text

On 7/28/2024 10:13 PM, Greg D wrote:
Makes sense.

Any chance for an enhancement down the road?? It would make the software that much more useful, especially for folks who aren't into formatting APRS packets.? If nothing else, having APRSIS32 do the formatting would add value by sanitizing the traffic going out over the APRS network.

Greg? KO6TH

Lynn Deffenbaugh via groups.io wrote:
The detailed explanation is to quell questions about the telemetry that APRSIS32 already sends.?? And my strange encoding of the actual values that show up in the aprs.fi graphs.

Also, to avoid questions about why APRSIS32 is sending messages to itself when it is actually sending the messages that define the telemetry values.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 7/28/2024 9:23 PM, Greg D wrote:
Ha, ok. That explains why I can't find it.? Curious, then, why the detailed explanation about how the overall telemetry packet formatting and decoding in APRS-IS? That seems to suggest there is a way for one to have APRSIS32 feed it.

Lynn, if you're looking for something else to enhance APRSIS32, this might be a good one.? Perhaps leverage the method used for reporting weather by having the data source periodically update a "telemetrynow.txt" file?? Knock that out in an afternoon, no?

Greg? KO6TH

Lynn Deffenbaugh via groups.io wrote:
APRSIS32 only sends internal telemetry on battery charging and GPS statistics.?? It doesn't currently support an external telemetry source.? Remember the original roots of APRSIS32 was APRSISCE on Windows Mobile.?? I implemented telemetry of parameters interesting to the phone user.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 7/28/2024 2:02 PM, Greg D wrote:
For some reason I'm not coming up with an answer after grazing the usual sources...? How does one configure APRSIS32 to send telemetry from an external source?

I've got a solar / battery system in the Shack with an Arduino that reads info from the Victron charge controller, driving a small LCD display.? It occurs to me that it should be easy to pipe that data via a serial connection to the PC.? It's already set up to output the data from my weather station (via WeeWx to the WxNow.txt file). How does one get similar data into the Telemetry feed of APRSIS?

Looking at  I see that there are configuration packets that need to be sent for the IS to know how to format the data, but I don't see how one configures APRSIS32 to read and send the actual data.? The "Telemetry" box is checked on the General configuration, yes, but where does it fetch the data from? I'm missing a key piece to the puzzle.

Unusually baffled on this,

Greg? KO6TH

Re: Sending Telemetry?

#37816

Makes sense.

Any chance for an enhancement down the road?? It would make the software that much more useful, especially for folks who aren't into formatting APRS packets.? If nothing else, having APRSIS32 do the formatting would add value by sanitizing the traffic going out over the APRS network.

Greg? KO6TH

Lynn Deffenbaugh via groups.io wrote:

Show quoted text

The detailed explanation is to quell questions about the telemetry that APRSIS32 already sends.?? And my strange encoding of the actual values that show up in the aprs.fi graphs.

Also, to avoid questions about why APRSIS32 is sending messages to itself when it is actually sending the messages that define the telemetry values.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 7/28/2024 9:23 PM, Greg D wrote:
Ha, ok. That explains why I can't find it.? Curious, then, why the detailed explanation about how the overall telemetry packet formatting and decoding in APRS-IS? That seems to suggest there is a way for one to have APRSIS32 feed it.

Lynn, if you're looking for something else to enhance APRSIS32, this might be a good one.? Perhaps leverage the method used for reporting weather by having the data source periodically update a "telemetrynow.txt" file?? Knock that out in an afternoon, no?

Greg? KO6TH

Lynn Deffenbaugh via groups.io wrote:
APRSIS32 only sends internal telemetry on battery charging and GPS statistics.?? It doesn't currently support an external telemetry source.? Remember the original roots of APRSIS32 was APRSISCE on Windows Mobile.?? I implemented telemetry of parameters interesting to the phone user.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 7/28/2024 2:02 PM, Greg D wrote:
For some reason I'm not coming up with an answer after grazing the usual sources...? How does one configure APRSIS32 to send telemetry from an external source?

I've got a solar / battery system in the Shack with an Arduino that reads info from the Victron charge controller, driving a small LCD display.? It occurs to me that it should be easy to pipe that data via a serial connection to the PC.? It's already set up to output the data from my weather station (via WeeWx to the WxNow.txt file). How does one get similar data into the Telemetry feed of APRSIS?

Looking at  I see that there are configuration packets that need to be sent for the IS to know how to format the data, but I don't see how one configures APRSIS32 to read and send the actual data.? The "Telemetry" box is checked on the General configuration, yes, but where does it fetch the data from? I'm missing a key piece to the puzzle.

Unusually baffled on this,

Greg? KO6TH

Re: Sending Telemetry?

Lynn Deffenbaugh

#37815

The detailed explanation is to quell questions about the telemetry that APRSIS32 already sends.?? And my strange encoding of the actual values that show up in the aprs.fi graphs.

Also, to avoid questions about why APRSIS32 is sending messages to itself when it is actually sending the messages that define the telemetry values.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

Show quoted text

On 7/28/2024 9:23 PM, Greg D wrote:
Ha, ok. That explains why I can't find it.? Curious, then, why the detailed explanation about how the overall telemetry packet formatting and decoding in APRS-IS?? That seems to suggest there is a way for one to have APRSIS32 feed it.

Lynn, if you're looking for something else to enhance APRSIS32, this might be a good one.? Perhaps leverage the method used for reporting weather by having the data source periodically update a "telemetrynow.txt" file?? Knock that out in an afternoon, no?

Greg? KO6TH

Lynn Deffenbaugh via groups.io wrote:
APRSIS32 only sends internal telemetry on battery charging and GPS statistics.?? It doesn't currently support an external telemetry source.? Remember the original roots of APRSIS32 was APRSISCE on Windows Mobile.?? I implemented telemetry of parameters interesting to the phone user.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 7/28/2024 2:02 PM, Greg D wrote:
For some reason I'm not coming up with an answer after grazing the usual sources...? How does one configure APRSIS32 to send telemetry from an external source?

I've got a solar / battery system in the Shack with an Arduino that reads info from the Victron charge controller, driving a small LCD display.? It occurs to me that it should be easy to pipe that data via a serial connection to the PC.? It's already set up to output the data from my weather station (via WeeWx to the WxNow.txt file). How does one get similar data into the Telemetry feed of APRSIS?

Looking at  I see that there are configuration packets that need to be sent for the IS to know how to format the data, but I don't see how one configures APRSIS32 to read and send the actual data.? The "Telemetry" box is checked on the General configuration, yes, but where does it fetch the data from?? I'm missing a key piece to the puzzle.

Unusually baffled on this,

Greg? KO6TH

Re: Sending Telemetry?

#37814

Ha, ok.? That explains why I can't find it.? Curious, then, why the detailed explanation about how the overall telemetry packet formatting and decoding in APRS-IS?? That seems to suggest there is a way for one to have APRSIS32 feed it.

Lynn, if you're looking for something else to enhance APRSIS32, this might be a good one.? Perhaps leverage the method used for reporting weather by having the data source periodically update a "telemetrynow.txt" file?? Knock that out in an afternoon, no?

Greg? KO6TH

Lynn Deffenbaugh via groups.io wrote:

Show quoted text

APRSIS32 only sends internal telemetry on battery charging and GPS statistics.?? It doesn't currently support an external telemetry source.? Remember the original roots of APRSIS32 was APRSISCE on Windows Mobile.?? I implemented telemetry of parameters interesting to the phone user.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 7/28/2024 2:02 PM, Greg D wrote:
For some reason I'm not coming up with an answer after grazing the usual sources...? How does one configure APRSIS32 to send telemetry from an external source?

I've got a solar / battery system in the Shack with an Arduino that reads info from the Victron charge controller, driving a small LCD display.? It occurs to me that it should be easy to pipe that data via a serial connection to the PC.? It's already set up to output the data from my weather station (via WeeWx to the WxNow.txt file). How does one get similar data into the Telemetry feed of APRSIS?

Looking at  I see that there are configuration packets that need to be sent for the IS to know how to format the data, but I don't see how one configures APRSIS32 to read and send the actual data.? The "Telemetry" box is checked on the General configuration, yes, but where does it fetch the data from?? I'm missing a key piece to the puzzle.

Unusually baffled on this,

Greg? KO6TH

Re: Sending Telemetry?

#37813

Or feed it to APRSIS32 as an AGW or KISS over TCP/IP packet.

It would "appear" to come from an RF portand so APRSIS32 would have to be configured to pass it onto APRS-IS.

Robert Giuliano
KB8RCO

On Sunday, July 28, 2024 at 05:51:06 PM EDT, Lynn Deffenbaugh <kj4erj@...> wrote:

And if you have sufficient coding talent to gather and format data from
the charge controller into a data pipe, you've got enough expertise to
read APRS101.PDF along with and
roll your own direct APRS-IS-feeding telemetry station, no need for
APRSIS32 capabilities.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

Show quoted text

On 7/28/2024 2:02 PM, Greg D wrote:
> For some reason I'm not coming up with an answer after grazing the
> usual sources...? How does one configure APRSIS32 to send telemetry
> from an external source?
>
> I've got a solar / battery system in the Shack with an Arduino that
> reads info from the Victron charge controller, driving a small LCD
> display.? It occurs to me that it should be easy to pipe that data via
> a serial connection to the PC.? It's already set up to output the data
> from my weather station (via WeeWx to the WxNow.txt file). How does
> one get similar data into the Telemetry feed of APRSIS?
>
> Looking at I see that there
> are configuration packets that need to be sent for the IS to know how
> to format the data, but I don't see how one configures APRSIS32 to
> read and send the actual data.? The "Telemetry" box is checked on the
> General configuration, yes, but where does it fetch the data from??
> I'm missing a key piece to the puzzle.
>
> Unusually baffled on this,
>
> Greg? KO6TH
>
>
>
>
>
>
>