Messaging Issues With VARA
All:?
I've noticed that APRSIS32 transmits twice (instead of once) when sending a message or replying to one. The 2nd transmission takes place immediately after the first and it only happens when using the Vara HF modem. Robust Packet (WinRPR) and UZ7HO don't seem to have this issue.?
Any ideas??
Tony -K2MO?
|
|
|
I need to get a passcode please.
Thanks.?
|
Re: Wx station identifiers
This is APRSIS32's list, basically just the list from page 63
aprs101.pdf.
} WeatherUnits[] = { {"DsVP","Davis Vantage Pro"}, /* K0GDI */
{"Dvs","Davis"},
{"HKT","Heathkit"},
{"PIC","PIC device"},
{"RSW","Radio Shack"},
{"U2kr","Remote Ultimeter logger"},
{"Upkm","Remote Ultimeter packet mode"},
{"U-II","Original Ultimeter U-II (auto mode)"},
{"U2R","Original Ultimeter U-II (remote mode)"},
{"U2k","Ultimeter 500/2000"},
{"U5","Ultimeter 500"} };
I don't know of any official additions to this list, but the spec
does say:
Users may specify any other 2–4 character
code for devices not in this list.
But of course, any additional codes would not have a human
readable expansion.
Maybe a job for the upcoming APRS Foundation?
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 1/20/2024 8:22 PM, Greg Depew wrote:
I run cumulus which also makes a wxnow.txt file.
They just recently added the ability to put a comment behind the
weather string. Adding .DsVP will tell at least 32 you have a
Vantage pro but I can't find the list to show the difference
between a pro, pro 2 or the vue.?
KB3KBR
Greg. Sent from my Samsung Galaxy smartphone.
-------- Original message --------
Date: 1/20/24 19:56 (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
I have a Davis Pro 2 and using Weather Display
for my software. Weather Display will create a Wxnow file for
APRS.?
Thanks
and 73,
Jim,
N8JE?
-------- Original message --------
Date: 1/20/24 5:03 PM (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
If anyone has a list of equipment types that
they can share that would be great.
So far I've figured out DsVP will decode as
Vantage pro but I have a Vue and can't find the list
anywhere.?
KB3KBR
Greg. Sent from my Samsung Galaxy smartphone.
-------- Original message --------
Date: 1/16/24 17:19 (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
Actually I saw a station north if me in Canada
that had it and just copied it. However I'm running a
Vantage vue and not the pro but I can't seem to find a list
of equipment types out there to distinguish between the 2.
So for now it's close enough.?
KB3KBR
Greg. Sent from my Samsung Galaxy smartphone.
-------- Original message --------
Date: 1/16/24 16:22 (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
Apparently you've fixed your issue.? I just took a raw
packet from aprs.fi
KB3KBR-1>APWW11,TCPIP*,qAC,T2PR:;KB3KBR-WX*161612z4124.48N/07942.59W_289/000g003t015r000p000P000h69b10093.DsVP
Battery 4.73, Temp In 75.4
and pasted it into an APRSIS32 instance and got the
following (Unit: Davis Vantage Pro):
And then I checked my full feed for KB3KBR-WX and see the
same information.?? Do you mind sharing what you found to
be the problem?
Lynn (D) - KJ4ERJ - Author of
APRSISCE for Windows Mobile and Win32
On 12/21/2023 4:55 PM, Greg
Depew wrote:
Sorry about that! KB3KBR-WX is the call.
In the attached screenshots one is chapter 12 of APRS
101 with the unit string. The other is my station where
I've applied Dvs.?
KB3KBR
Greg. Sent from my Samsung Galaxy smartphone.
-------- Original message --------
Date: 12/21/23 12:50 (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
A callsign-SSID and/or screen shot goes a long way in
helping me look at the details of what you are asking.
Lynn (D) - KJ4ERJ - Author of
APRSISCE for Windows Mobile and Win32
On 12/21/2023 8:11 AM, Greg
Depew wrote:
Hi Lynn, I was looking at my weather
station I transmit, and in the info box when clicked
upon it give the detailed info. Ie temp,? wind, rain
etc. It also shows a unit field as well. I was
guessing this was to define what weather station you
are using, but after playing a bit with cumulus
changing the comment to Davis Vantage Vue then over
to Dvs as recommended in the 101 file, it still says
Unit: UnknownP(Dvs).?
Any assistance you can provide??
KB3KBR
Greg. Sent from my Samsung Galaxy smartphone.
|
Re: Wx station identifiers
I run cumulus which also makes a wxnow.txt file. They just recently added the ability to put a comment behind the weather string. Adding .DsVP will tell at least 32 you have a Vantage pro but I can't find the list to show the difference between
a pro, pro 2 or the vue.?
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
toggle quoted message
Show quoted text
-------- Original message --------
From: Jim Ebner <n8je@...>
Date: 1/20/24 19:56 (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
I have a Davis Pro 2 and using Weather Display for my software. Weather Display will create a Wxnow file for APRS.?
Thanks and 73,
Jim, N8JE?
-------- Original message --------
From: Greg Depew <goatherder_4891@...>
Date: 1/20/24 5:03 PM (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
If anyone has a list of equipment types that they can share that would be great.
So far I've figured out DsVP will decode as Vantage pro but I have a Vue and can't find the list anywhere.?
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
-------- Original message --------
From: Greg Depew <goatherder_4891@...>
Date: 1/16/24 17:19 (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
Actually I saw a station north if me in Canada that had it and just copied it. However I'm running a Vantage vue and not the pro but I can't seem to find a list of equipment types out there to distinguish between the 2. So for now it's close
enough.?
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
-------- Original message --------
From: Lynn Deffenbaugh <kj4erj@...>
Date: 1/16/24 16:22 (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
Apparently you've fixed your issue.? I just took a raw packet from aprs.fi
KB3KBR-1>APWW11,TCPIP*,qAC,T2PR:;KB3KBR-WX*161612z4124.48N/07942.59W_289/000g003t015r000p000P000h69b10093.DsVP Battery 4.73, Temp In 75.4
and pasted it into an APRSIS32 instance and got the following (Unit: Davis Vantage Pro):
And then I checked my full feed for KB3KBR-WX and see the same information.?? Do you mind sharing what you found to be the problem?
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 12/21/2023 4:55 PM, Greg Depew wrote:
Sorry about that! KB3KBR-WX is the call. In the attached screenshots one is chapter 12 of APRS 101 with the unit string. The other is my station where I've applied Dvs.?
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
-------- Original message --------
Date: 12/21/23 12:50 (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
A callsign-SSID and/or screen shot goes a long way in helping me look at the details of what you are asking.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 12/21/2023 8:11 AM, Greg Depew wrote:
Hi Lynn, I was looking at my weather station I transmit, and in the info box when clicked upon it give the detailed info. Ie temp,? wind, rain etc. It also shows a unit field as well. I was guessing this was to define what weather station you
are using, but after playing a bit with cumulus changing the comment to Davis Vantage Vue then over to Dvs as recommended in the 101 file, it still says Unit: UnknownP(Dvs).?
Any assistance you can provide??
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
|
Re: Wx station identifiers
I have a Davis Pro 2 and using Weather Display for my software. Weather Display will create a Wxnow file for APRS.?
toggle quoted message
Show quoted text
-------- Original message -------- From: Greg Depew <goatherder_4891@...> Date: 1/20/24 5:03 PM (GMT-05:00) Subject: Re: [APRSISCE] Wx station identifiers
If anyone has a list of equipment types that they can share that would be great.
So far I've figured out DsVP will decode as Vantage pro but I have a Vue and can't find the list anywhere.?
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
-------- Original message --------
From: Greg Depew <goatherder_4891@...>
Date: 1/16/24 17:19 (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
Actually I saw a station north if me in Canada that had it and just copied it. However I'm running a Vantage vue and not the pro but I can't seem to find a list of equipment types out there to distinguish between the 2. So for now it's close
enough.?
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
-------- Original message --------
From: Lynn Deffenbaugh <kj4erj@...>
Date: 1/16/24 16:22 (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
Apparently you've fixed your issue.? I just took a raw packet from aprs.fi
KB3KBR-1>APWW11,TCPIP*,qAC,T2PR:;KB3KBR-WX*161612z4124.48N/07942.59W_289/000g003t015r000p000P000h69b10093.DsVP Battery 4.73, Temp In 75.4
and pasted it into an APRSIS32 instance and got the following (Unit: Davis Vantage Pro):
And then I checked my full feed for KB3KBR-WX and see the same information.?? Do you mind sharing what you found to be the problem?
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 12/21/2023 4:55 PM, Greg Depew wrote:
Sorry about that! KB3KBR-WX is the call. In the attached screenshots one is chapter 12 of APRS 101 with the unit string. The other is my station where I've applied Dvs.?
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
-------- Original message --------
Date: 12/21/23 12:50 (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
A callsign-SSID and/or screen shot goes a long way in helping me look at the details of what you are asking.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 12/21/2023 8:11 AM, Greg Depew wrote:
Hi Lynn, I was looking at my weather station I transmit, and in the info box when clicked upon it give the detailed info. Ie temp,? wind, rain etc. It also shows a unit field as well. I was guessing this was to define what weather station you
are using, but after playing a bit with cumulus changing the comment to Davis Vantage Vue then over to Dvs as recommended in the 101 file, it still says Unit: UnknownP(Dvs).?
Any assistance you can provide??
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
|
Re: Wx station identifiers
If anyone has a list of equipment types that they can share that would be great.
So far I've figured out DsVP will decode as Vantage pro but I have a Vue and can't find the list anywhere.?
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
toggle quoted message
Show quoted text
-------- Original message --------
From: Greg Depew <goatherder_4891@...>
Date: 1/16/24 17:19 (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
Actually I saw a station north if me in Canada that had it and just copied it. However I'm running a Vantage vue and not the pro but I can't seem to find a list of equipment types out there to distinguish between the 2. So for now it's close
enough.?
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
-------- Original message --------
From: Lynn Deffenbaugh <kj4erj@...>
Date: 1/16/24 16:22 (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
Apparently you've fixed your issue.? I just took a raw packet from aprs.fi
KB3KBR-1>APWW11,TCPIP*,qAC,T2PR:;KB3KBR-WX*161612z4124.48N/07942.59W_289/000g003t015r000p000P000h69b10093.DsVP Battery 4.73, Temp In 75.4
and pasted it into an APRSIS32 instance and got the following (Unit: Davis Vantage Pro):
And then I checked my full feed for KB3KBR-WX and see the same information.?? Do you mind sharing what you found to be the problem?
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 12/21/2023 4:55 PM, Greg Depew wrote:
Sorry about that! KB3KBR-WX is the call. In the attached screenshots one is chapter 12 of APRS 101 with the unit string. The other is my station where I've applied Dvs.?
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
-------- Original message --------
Date: 12/21/23 12:50 (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
A callsign-SSID and/or screen shot goes a long way in helping me look at the details of what you are asking.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 12/21/2023 8:11 AM, Greg Depew wrote:
Hi Lynn, I was looking at my weather station I transmit, and in the info box when clicked upon it give the detailed info. Ie temp,? wind, rain etc. It also shows a unit field as well. I was guessing this was to define what weather station you
are using, but after playing a bit with cumulus changing the comment to Davis Vantage Vue then over to Dvs as recommended in the 101 file, it still says Unit: UnknownP(Dvs).?
Any assistance you can provide??
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
|
Re: Multiple Beacons using APRSIS32 Internet Only
would be great if you could easily click on URL links that show up on the map ...even if restricted to pic's links and not full URL ( virus etc)
( thanks for all the great work Lynn )?
|
Re: Trace Port Window autostart?
Thank you Lynn,
If I enable Packets in View Logs instead of Port (TNC) then I can see what I was asking (human read frames)
Take care now!
--
73 de Demetre - SV1UY (M0SUY)
INTERNET e-mail: demetre.sv1uy@...
WINLINK MAIL:?SV1UY?or?M0SUY?via RADIO
WEB: ( )
APRS: 1st & best Social Network for Radio Amateurs
|
Re: Trace Port Window autostart?
Enable the Transmit trace log and it will show the humanly readable packets as well as whether they are destined for IS, RF, or both (or even Internal).
Enables / Ports / Log All will also cause APRSIS32 to produce *.PKT files that contain all? RF handled packets, both transmit and receive, IIRC.?? Don't have time right now to double-check that in the source.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
toggle quoted message
Show quoted text
On 1/19/2024 5:12 AM, Demetre - SV1UY (M0SUY) wrote: Hi Lynn and group,
I think it would be very useful to be able to trace our own transmitted frames in a way readable to mere humans, i.e. not in HEX!
Then we would be able to make sure we are transmitting the correct PATH at an eyeglance!
So please at least do this or put it in your TODO list!
|
Re: Trace Port Window autostart?
Hi Lynn and group,
I think it would be very useful to be able to trace our own transmitted frames in a way readable to mere humans, i.e. not in HEX!
Then we would be able to make sure we are transmitting the correct PATH at an eyeglance!
So please at least do this or put it in your TODO list!
--
73 de Demetre - SV1UY (M0SUY)
INTERNET e-mail: demetre.sv1uy@...
WINLINK MAIL:?SV1UY?or?M0SUY?via RADIO
WEB: ( )
APRS: 1st & best Social Network for Radio Amateurs
|
Re: Multiple Beacons using APRSIS32 Internet Only
Yes, the GP-* objects are all coming from a single instance of APRSIS32.? ?I also transmit a repeater object, 146.850-P (https://aprs.fi/146.850-P), for our local club repeater.? You create these like any other object in APRSIS32, and the key is what you put in the Cmnt string.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
PS.? Sorry about the delayed response, but somehow these threaded messages didn't hit my inbox, except for Adam's final one.
|
Re: Multiple Beacons using APRSIS32 Internet Only
No Problem. If you need further assistance feel free to reach out directly?or via this thread.
On Thu, Jan 18, 2024 at 7:33?AM Brian Wall < w1bkw@...> wrote:
Thank you Adam, I will take a look at those references and see what I find.
?
73, Brian
W1BKW
?
?
Good morning,
This can be done with a single instance of APRSIS32. I have several from my home station, and several on a club station that I manage that go both over IP and RF.?
Please look at the following
-
Specifically the items and objects originated
?
On Wed, Jan 17, 2024 at 11:03?PM Brian Wall <w1bkw@...> wrote:
?
Also Lynn, this maybe the same principle as you are doing with the GP-XXXXX tower icons you are posting.? It would be the same idea but using frequencies instead of mt names.? Is the GP beacons all from one instance of APRSIS32?
On Jan 17, 2024, at 10:58?PM, Brian Wall <W1BKW@...> wrote:
?I have noticed a local APRS station is beaconing the digipeater ID as well as the frequency for a repeater at the same site. (I know some of my TNC's have 3 beacon text available.)
I have various repeaters which are not digipeater locations but I was wondering if I could use APRSIS32 to beacon the frequency and tower icon for multiple locations?
1. Would I have to run multiple instances of APRSIS32?? or is there a way to create multiple call signs or frequencies each with it's own lat/long, etc. in one instance of the app.
2. I see someone is beaconing/positioning 5 callsign/ssid's using APRSDroid so it appears it can be done over IP.
Thanks for any insight.
73, Brian
W1BKW
|
Re: Multiple Beacons using APRSIS32 Internet Only
Thank you Adam, I will take a look at those references and see what I find.
?
73, Brian
W1BKW
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of
Adam Mahnke
Sent: Thursday, January 18, 2024 07:19
To: [email protected]
Subject: Re: [APRSISCE] Multiple Beacons using APRSIS32 Internet Only
?
Good morning,
This can be done with a single instance of APRSIS32. I have several from my home station, and several on a club station that I manage that go both over IP and RF.?
Please look at the following
-
Specifically the items and objects originated
?
On Wed, Jan 17, 2024 at 11:03?PM Brian Wall <w1bkw@...> wrote:
?
Also Lynn, this maybe the same principle as you are doing with the GP-XXXXX tower icons you are posting.? It would be the same idea but using frequencies instead of mt names.? Is the GP beacons all from one instance of APRSIS32?
On Jan 17, 2024, at 10:58?PM, Brian Wall <W1BKW@...> wrote:
?I have noticed a local APRS station is beaconing the digipeater ID as well as the frequency for a repeater at the same site. (I know some of my TNC's have 3 beacon text available.)
I have various repeaters which are not digipeater locations but I was wondering if I could use APRSIS32 to beacon the frequency and tower icon for multiple locations?
1. Would I have to run multiple instances of APRSIS32?? or is there a way to create multiple call signs or frequencies each with it's own lat/long, etc. in one instance of the app.
2. I see someone is beaconing/positioning 5 callsign/ssid's using APRSDroid so it appears it can be done over IP.
Thanks for any insight.
73, Brian
W1BKW
|
Re: Multiple Beacons using APRSIS32 Internet Only
Good morning,
This can be done with a single instance of APRSIS32. I have several from my home station, and several on a club station that I manage that go both over IP and RF.?
Please look at the following
- Specifically the items and objects originated
On Wed, Jan 17, 2024 at 11:03?PM Brian Wall < w1bkw@...> wrote:
Also Lynn, this maybe the same principle as you are doing with the GP-XXXXX tower icons you are posting.? It would be the same idea but using frequencies instead of mt names.? Is the GP beacons all from one instance of APRSIS32?
On Jan 17, 2024, at 10:58?PM, Brian Wall <W1BKW@...> wrote:
?I have noticed a local APRS station is beaconing the digipeater ID as well as the frequency for a repeater at the same site. (I know some of my TNC's have 3 beacon text available.)
I have various repeaters which are not digipeater locations but I was wondering if I could use APRSIS32 to beacon the frequency and tower icon for multiple locations?
1. Would I have to run multiple instances of APRSIS32?? or is there a way to create multiple call signs or frequencies each with it's own lat/long, etc. in one instance of the app.
2. I see someone is beaconing/positioning 5 callsign/ssid's using APRSDroid so it appears it can be done over IP.
Thanks for any insight.
73, Brian
W1BKW
|
Re: Multiple Beacons using APRSIS32 Internet Only
Also Lynn, this maybe the same principle as you are doing with the GP-XXXXX tower icons you are posting. ?It would be the same idea but using frequencies instead of mt names. ?Is the GP beacons all from one instance of APRSIS32?
toggle quoted message
Show quoted text
On Jan 17, 2024, at 10:58?PM, Brian Wall <W1BKW@...> wrote:
?I have noticed a local APRS station is beaconing the digipeater ID as well as the frequency for a repeater at the same site. (I know some of my TNC's have 3 beacon text available.)
I have various repeaters which are not digipeater locations but I was wondering if I could use APRSIS32 to beacon the frequency and tower icon for multiple locations?
1. Would I have to run multiple instances of APRSIS32?? or is there a way to create multiple call signs or frequencies each with it's own lat/long, etc. in one instance of the app.
2. I see someone is beaconing/positioning 5 callsign/ssid's using APRSDroid so it appears it can be done over IP.
Thanks for any insight.
73, Brian
W1BKW
|
Multiple Beacons using APRSIS32 Internet Only
I have noticed a local APRS station is beaconing the digipeater ID as well as the frequency for a repeater at the same site. (I know some of my TNC's have 3 beacon text available.)
I have various repeaters which are not digipeater locations but I was wondering if I could use APRSIS32 to beacon the frequency and tower icon for multiple locations?
1. Would I have to run multiple instances of APRSIS32?? or is there a way to create multiple call signs or frequencies each with it's own lat/long, etc. in one instance of the app.
2. I see someone is beaconing/positioning 5 callsign/ssid's using APRSDroid so it appears it can be done over IP.
Thanks for any insight.
73, Brian
W1BKW
|
Re: Trace Port Window autostart?
Thanks for reply Lynn,
It would be nice to be able to have a decent Monitor in APRSIS32 sometime.
Not so important but I hope you put it in your TODO list for a rainy day that you are bored! Hi hi hi!!!
-
73 de Demetre - SV1UY (M0SUY)
INTERNET e-mail: demetre.sv1uy@...
WINLINK MAIL:?SV1UY?or?M0SUY?via RADIO
WEB: ( )
APRS: 1st & best Social Network for Radio Amateurs
|
Re: STATUS BEACON and timestamp
Fair enough Lynn,
Thanks for reply OM.
--
73 de Demetre - SV1UY (M0SUY)
INTERNET e-mail: demetre.sv1uy@...
WINLINK MAIL:?SV1UY?or?M0SUY?via RADIO
WEB: ( )
APRS: 1st & best Social Network for Radio Amateurs
|
Re: Wx station identifiers
Actually I saw a station north if me in Canada that had it and just copied it. However I'm running a Vantage vue and not the pro but I can't seem to find a list of equipment types out there to distinguish between the 2. So for now it's close
enough.?
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
toggle quoted message
Show quoted text
-------- Original message --------
From: Lynn Deffenbaugh <kj4erj@...>
Date: 1/16/24 16:22 (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
Apparently you've fixed your issue.? I just took a raw packet from aprs.fi
KB3KBR-1>APWW11,TCPIP*,qAC,T2PR:;KB3KBR-WX*161612z4124.48N/07942.59W_289/000g003t015r000p000P000h69b10093.DsVP Battery 4.73, Temp In 75.4
and pasted it into an APRSIS32 instance and got the following (Unit: Davis Vantage Pro):
And then I checked my full feed for KB3KBR-WX and see the same information.?? Do you mind sharing what you found to be the problem?
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 12/21/2023 4:55 PM, Greg Depew wrote:
Sorry about that! KB3KBR-WX is the call. In the attached screenshots one is chapter 12 of APRS 101 with the unit string. The other is my station where I've applied Dvs.?
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
-------- Original message --------
Date: 12/21/23 12:50 (GMT-05:00)
Subject: Re: [APRSISCE] Wx station identifiers
A callsign-SSID and/or screen shot goes a long way in helping me look at the details of what you are asking.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 12/21/2023 8:11 AM, Greg Depew wrote:
Hi Lynn, I was looking at my weather station I transmit, and in the info box when clicked upon it give the detailed info. Ie temp,? wind, rain etc. It also shows a unit field as well. I was guessing this was to define what weather station you
are using, but after playing a bit with cumulus changing the comment to Davis Vantage Vue then over to Dvs as recommended in the 101 file, it still says Unit: UnknownP(Dvs).?
Any assistance you can provide??
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
|
Jim Ebner
Demetre - SV1UY (M0SUY)
Brian Wall