Apparently you've fixed your issue.? I just took a raw packet from aprs.fi

KB3KBR-1>APWW11,TCPIP*,qAC,T2PR:;KB3KBR-WX*161612z4124.48N/07942.59W_289/000g003t015r000p000P000h69b10093.DsVP Battery 4.73, Temp In 75.4

and pasted it into an APRSIS32 instance and got the following (Unit: Davis Vantage Pro):

And then I checked my full feed for KB3KBR-WX and see the same information.?? Do you mind sharing what you found to be the problem?

Sorry about that! KB3KBR-WX is the call. In the attached screenshots one is chapter 12 of APRS 101 with the unit string. The other is my station where I've applied Dvs.?

KB3KBR Greg. Sent from my Samsung Galaxy smartphone.

-------- Original message --------

From: Lynn Deffenbaugh <kj4erj@...>

Date: 12/21/23 12:50 (GMT-05:00)

To: [email protected]

Subject: Re: [APRSISCE] Wx station identifiers

A callsign-SSID and/or screen shot goes a long way in helping me look at the details of what you are asking.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 12/21/2023 8:11 AM, Greg Depew wrote:

Hi Lynn, I was looking at my weather station I transmit, and in the info box when clicked upon it give the detailed info. Ie temp,? wind, rain etc. It also shows a unit field as well. I was guessing this was to define what weather station you are using, but after playing a bit with cumulus changing the comment to Davis Vantage Vue then over to Dvs as recommended in the 101 file, it still says Unit: UnknownP(Dvs).?

Any assistance you can provide??

KB3KBR Greg. Sent from my Samsung Galaxy smartphone.