开云体育

Hi Cezar, It is possible but unlikely that this is caused by a problem with the firmware or EEPROM values in the microprocessor. Run the SO2R Box Utility, press Connect to connect to the SO2R Box,

Cezar I would look for an unsoldered connection, probably around the relays. I'd also look for an unsoldered connection at the audio input/output jacks. Dennis W1UE

Hi all, I’ve just bought used YCCC SO2R+ box. Successfully installed all the needed software, virt com ports etc. The box work properly with N1MM. Keying both radios and switching focus. The only

Inexplicably, the SO2R+ box has started to remember the settings again. I'll be in touch if the situation changes. Weird. Cheers, John G4DRS

Great! Thanks, Paul. I do have a PIC programmer in the drawer. I can't remember ever having used it before, if I'm honest... I'll look into it. Cheers, John G4DRS > > >

You can program it yourself if you have access to a programmer. The necessary files are on the website. Paul, K1XM [email protected]> wrote:

$19 shipping! Do I need to buy the device pre-programmed, or could I source one over here and program it myself? Cheers, John G4DRS

Yes, I have replacement PICs available. PIC itself is $5, but postage to get it to England is $19! Dennis W1UE

The settings are stored in EEPROM in the microprocessor. If you reset the EEPROM using the SO2R Box utility and it does not keep the new values across a power cycle then I think the microprocessor

I've been using my YCCC SO2R+ 4-radio box for several years now, and I'm very pleased with it. Just lately, however, it seems that, each time I switch it on, it has 'forgotten' its settings and

Yes u r

Test to see if I am now a member of this group. de K1WZC - Bert

Reassembled my station and all is working as it should again. No idea why I lost the previously installed firmware......heavy rain the night previously but no thunder or lightning, all very strange

I finally got round to checking out my SO2R+ box today, I followed Paul's instructions and discovered that the firmware was corrupted. I downloaded the new updated firmware and it would appear my

. one of the versions of the firmware (don't ask me which one) had tendency to "lock up" .go to utility program and do full reset before starting slicing and dicing. Sent: Monday, September 12,

Many thanks for the information Paul, that will give me something to look out for, I will do the tests you indicate tomorrow. As far as I am aware we have not suffered from a thunder storm for at

Hi Roger, The circuitry that drives the LEDs is pretty simple. If they are not lighting then the microprocessor is probably not running the SO2R Box code. Check that there is +5V on the

This morning when I attempted to power up my SO2R+ box nothing happened complete failure, no Led's zilch.. Preliminary checks established that the box was getting 12 volts and the internal fuse was

Hello, Looking for at least one set of ICOM Cables for the YCCC SO2R BOX. If you have one or two you want to part with, please contact me directly. Thank you and 73, Jose - N4BAA CQ WAZ Manager

Hi Yuri, The 4 radio capability was added because many VHF contesters have more than two radios. Unfortunately N1MM Logger+ does not have much support for more than two radios. The only logger I