The 4 radio capability was added because many VHF contesters have more than two radios.
Unfortunately N1MM Logger+ does not have much support for more than two radios.? The only logger I know of that does is WriteLog and I do not have experience with using it that way.
On Wed, Jul 20, 2022 at 6:42 PM Yuri EB5A via <ew2cr=[email protected]> wrote:
Greetings to all ! I usually use the SO2R configuration, N1MM+, two keyboards and one PC.?To switch left, right, both, I connected two pedals to pins 10 and 11 of the AUX connector. What is very convenient. Recently installed all the parts on the board of the box.? I connected the third transceiver to the third input that appeared. Using macros {OTRSP MAP23} with AHK, I swapped the second and third radios. And then I got lost. How to switch CAT connection? N1MM+ only supports two radios. Currently I use an additional third transceiver with second computer and for switching I use the third pedal, which connects both ears to the third transceiver through a relay.? Who knows the most correct connection for SO3R use in CW and SSB ? And what is the idea of four inputs in general ?
