开云体育

Hi, I just set up my winlink and wanted to try it via APRS/YAAC. The first time I tried to send mail YAAC prompted me but I used the wrong password. Now YAAC doesn't seem to want to prompt me again. I only have one try left before (I'm not sure what happens). So how can I get YAAC to prompt me for the password again? I looked in an exported xml but nothing jumped out at me. Thanks, KD2ZUG [Charlie] 73

Greetings all, With the demise of my old TM-V71A + RC-D710 rig, I decided to splurge on an entirely new rig -- ICOM-9700. (I'll use this for a lot more than APRS and it's been several years since I got a new rig). My shack has been 100% Linux for awhile -- recently upgraded to Debian 12. Rig is connected via USB. I cloned the most recent dev branch of Dire Wolf and have it partially setup. I made an AGWPE port in YAAC and I've got YAAC successfully connected for RX, it's decoding packets just as it always did with my old rig. However, it's unclear to me what I need to do for PTT/TX. There are some settings in the direwolf.conf file, and there may be some menu tweaks needed on the ICOM-9700 itself. Also, I read about compiling Dire Wolf with hamlib for cat control. Is this necessary? I wouldn't want to go down that path unless it's really needed. I'll likely post this on a Dire Wolf group as well, but I'm curious if anyone here might point me in the right direction. I suspect I have things about 95%+ setup, but just need to weak the PTT settings in the conf, and possibly a tweak or two on the rig itself. Thanks! 73, KD0KZE / Paul

Say, is the www.ka2ddo.org site currently down? I wanted to check a couple things, but can't reach it. Thanks! 73, KD0KZE / Paul

Greetings, all. Mac users, please manually download this update and unzip it over your existing installation. I finally got to test YAAC on a Mac OS X system, and made a few improvements along with fixing the problem. ---------------------------------------------- next beta build#183 of YAAC ("Yet Another APRS Client"), created 2023-Jul-16 downloadable from https://www.ka2ddo.org/ka2ddo/YAAC.html or https://sourceforge.net/p/yetanotheraprsc changes and updates include: 1. fix broken startup on Mac OS X, and do some platform-specific cleanup to make YAAC operate more cleanly in the OS X environment. 2. more code cleanup for the advance to Java 8 as minimum release. 3. fix APRS Text message sending to not use sequence numbers (requesting acks) if the message is addressed to a known group, rather than to a single station or APRS-IS service. 4. fix refreshing of station/object table when sorting by age of the entries in the list. 5. correct reported version of OpenMap library used in YAAC.

I ran into an issue today. Looking at the screen in my mobile, I saw a big cluster of calls in one spot. I wanted to zoom in and see who/what was up. However, I have Auto-Center turned on, so as soon as I zoomed in and moved the screen, it jumped back to center on me and I lost track of the others. Any chance of adding a button on the main screen to toggle Auto-Center? Right now, I have to get the mouse or keyboard with trackpad out and go to FILE and turn on/off the Auto-Center feature. Since it doesn't seem to remember its state on reboot, I always have to remember to turn on auto centering. Having a large button in that grid to toggle it on and off would be good. -- 73, Michael WA7SKG "Any day you do not learn one new thing is a wasted day."

I've been on the road the last four months and using APRS a lot on the long travels. I notice that occasionally my vehicle icon will have a colored circle around it. Sometimes light blue, sometimes a kind of aqua, sometimes green. It seems somewhat random. I am not changing anything. I'm not finding anything right off that explains this behavior. Now and then, when another vehicle appears on my display, they, too, occasionally display a similar shaded circle around their icon. What/why am I seeing this? -- 73, Michael WA7SKG "Any day you do not learn one new thing is a wasted day."

I just saw this and wondered if we have or could have this in YAAC. Sorry if it's there and I have not seen it. https://www.youtube.com/watch?v=9Yw0YvzuGAk

Hi Andrew, Just upgraded and am getting the following issue; % java -jar ./YAAC.jar Thu Jul 13 19:57:01 AEST 2023: YAACBootstrap starting... os.name=Mac OS X os.version=13.4.1 os.arch=aarch64 locale=en_AU java.version=20.0.1 java.class.version=64.0 JVM: BellSoft OpenJDK 64-Bit Server VM 20.0.1+10 java.class.path=./YAAC.jar Thu Jul 13 19:57:01 AEST 2023: YAACBootstrap finding installation directory.... launching subprocess to run YAAC... java.home=/Library/Java/JavaVirtualMachines/liberica-jdk-20-full.jdk/Contents/Home Java executable found at /Library/Java/JavaVirtualMachines/liberica-jdk-20-full.jdk/Contents/Home/bin/java Thu Jul 13 19:57:01 AEST 2023: starting YAAC.... Thu Jul 13 19:57:01 AEST 2023: YAAC initializing on Mac OS X 13.4.1 [aarch64] with Java 20.0.1 Thu Jul 13 19:57:01 AEST 2023: load cached preferences.... Thu Jul 13 19:57:01 AEST 2023: YAAC checking if upgrader needs moving.... Thu Jul 13 19:57:01 AEST 2023: YAAC finding installation directory.... moving new upgrade.jar into place Thu Jul 13 19:57:01 AEST 2023: YAAC loading CoreProvider.... Thu Jul 13 19:57:01 AEST 2023: CoreProvider instantiated. Thu Jul 13 19:57:01 AEST 2023: creating SymAttr objects for 1.0.1... Thu Jul 13 19:57:01 AEST 2023: filling in text for 1.0.1 symbols... Thu Jul 13 19:57:01 AEST 2023: filling in text for extended symbols... loading plugin --core-- name YAAC version 1.0-beta182(11-Jul-2023) Exception in thread "main" java.lang.NoClassDefFoundError: jssc/SerialPortEventListener at java.base/java.lang.ClassLoader.defineClass1(Native Method) at java.base/java.lang.ClassLoader.defineClass(ClassLoader.java:1013) . . . Looks like it can’t find the Serial Port library. Both the upgrade, and a fresh download show the same issue. Carl.

It took a long time to get this build out. There are a lot of changes and cleanups in this build, but I hope you will appreciate them all. I won't be releasing an updated map set for a few days because this build of YAAC supports a changed and enhanced map importing that older versions of YAAC can't handle, so I want this build to be available before users start complaining their old build of YAAC can't handle the updated map set. -------------------------------------------------------------------------------------------- next beta build#182 of YAAC ("Yet Another APRS Client"), created 2023-Jul-11 downloadable from https://www.ka2ddo.org/ka2ddo/YAAC.html or https://sourceforge.net/p/yetanotheraprsc changes and updates include: 1. fix IS-to-RF (transmit) I-gating to use the I-gate's RF port callsign-SSID and tocall instead of the original station's values in the raw AX.25 frame. This fixes a possible contributor to the APRS flooding noticed on #APRSThursday. 2. add new utility called WayAnalyzer to help debug issue with OpenStreetMap importing and rendering. 3. significant logic and performance improvements in importing OpenStreetMap datasets, though, alas, there is still more work to come. 4. reaarrange the source code so that Maven builds with POM files will actually work correctly for both the YAAC application and all the currently supported plugins, with appropriate adjustments to the Ant build.xml files to work with the new structure. 5. a new Debug plugin which allows dynamically turning on and off debug logging from the expert-mode Configuration dialog for different supported categories of logging while YAAC is running. Also some new core API methods on the DebugCtl class to permit plugins to register new debug logging categories. 6. version update on the JavaHelp library. 7. some code cleanup for the change to Java 8 as minimum supported runtime release, so as to reduce warnings from findbugs and IDE, including identifying interfaces meeting the FunctionalInterface annotation. 8. fix references to old http:// websites in Javadocs to use the current https:// URLs to avoid redirections by browsers visiting the Javadocs on the author's website. 9. add configuration option to not gray out old message traffic (to make it more readable in the UI). 10. fix exceptions thrown when doing a Locate->Landmark search so that all matches will be reported. 11. first draft at fixing filtered message view. 12. make it possible to select text from the popup OSM node/way information dialog and copy it to the clipboard. useful for debugging OSM issues. 13. allow configurable level of position ambiguity in locally-originated beacons. 14. ensure if use of GPS is deselected in the configuration wizard, beacons configured to use GPS as the position source automatically have the "Use GPS for Position" option unchecked. 15. fix places in YAAC where HTTPS transactions were still allowed when the option to force only unencrypted transactions was specified. 16. keep unlabeled OSM ways fronm being selected when clicked on the map if rendering unlabeled ways is disabled. 17. ensure plugin status tabl is correctly updated when a new plugin is installed. 18. ensure AX.25 frame command/poll bits are set correctly. 19. fix SRTM (topographic) data downloader to allow the user to abort if they don't have a USGS account yet to use for the downloading. 20. fix pseudo APRS-IS server plugin so a jammed subordinate client is treated the same way as a real APRS-IS backbone server would, disconnecting the client rather than letting all of YAAC get frozen. 21. remove the bluetooth plugin from the supported plugin set, as the BlueCove library no longer works with current versions of Microsoft Windows. 22. fix port naming in the marineports plugin so the port driver for NMEA-0183 over TCP/IP can actually be used.

I can transmit messages in chat windows and at bottom of map, but the [BCN] button is greyed out, not clickable for some reason. In config-transmit, "beacon destination" is set to BEACON. config-beacon I have tried a couple different settings, I have position off. Thank you, Kevin KD9SPR

Map labelling is displayed based on the current map zoom level and the type of item being labelled. For example, the name of a tiny hamlet would stop being rendered sooner upon zooming out than the name of an entire province would be. The exact default zoom level settings were chosen based on the density of map features in my area (since I look at that part of the map the most). However, those defaults might not be appropriate for your area. The settings can be changed by going to View->Layers...->Select Geographical Map Layers, and adjusting the zoom level numbers on the tabular lists for Ways and Places. From: [email protected] <[email protected]> on behalf of Giovanni IZ5PQT <iz5pqt@...> Sent: Wednesday, June 7, 2023, 2:39 PM To: [email protected] <[email protected]> Subject: Re: Font/icon size (was: Re: [yaac-users] Disk space issue) Andrew, OK, got it. Now another small problem: the maps are not showing anymore the names of places ( I mean towns, villages. localities etc. ). The only names that appear are those of rivers (!!). I have the impression that it was not like so when I started, so maybe I have messed up something! I appreciate all the effort you are doing to support this nice piece of software! 73 Giovanni iz5pqt 73 Giovanni IZ5PQT _._,_._,_

Alas, it takes a _very_ long time (hours to _days_) to import the OSM data, especially from the bzipped XML format. Part of the issue is that the OSM database is structured optimally for a DB (what they call "normalized"). The YAAC importer deliberately de-normalizes the data for efficiency in rendering, which requires huge temporary datafiles (in excess of 48GB) to hold all the OSM Node lat/lon values for easy access in putting those values directly into OSM Way objects instead having to convert Node IDs to lat/lon at render time. Note this code is optimized for whole-planet imports, so it wastes a _lot_ of temporary disk space when doing a subset import. How exactly did you stop the import? If you use the Cancel button on the import progress dialog window, the importer will delete all its temporary files as part of import termination, but even that could take several minutes, depending on the speed of your filesystem and the number of tile-specific temporary files that need to be cleaned up. If you just shut down YAAC, the importer won't get a chance to delete the temporary files. The temporary files are located in your YAAC tile file directory (by default, ${HOME}/YAAC/tiledir [where ${HOME} is your user-specific home directory] unless you used the expert-mode Configuration dialog to put it somewhere else). Any file in that directory or its latitude-specific subdirectories ending in .tmp (temporary data files) or .log (importer progess log) can be safely deleted (unless an import is currently in progress, of course). Alternatively, you could just start another import (which cleans up any stale temporary files before starting over) and immediately Cancel it properly so it can clean up the few new temporary files. Due to the pain of importing OSM data, I make a copy of my whole-planet data available on my website, so you can download already-imported OSM data directly into YAAC without having to run the importer yourself. Go to File->OpenStreetMap->Download Pre-imported Tiles choice, and choose the geographical area you want to download. However, due to troubleshooting a new unreleased feature in the importer, I haven't updated my website's map tiles since November 2022. So the data is available, but won't have any OSM changes or additions since November. Hope this helps. Andrew, KA2DDO author of YAAC From: [email protected] <[email protected]> on behalf of Giovanni IZ5PQT Sent: Tuesday, June 6, 2023, 11:44 AM Hello everybody, I am a new user and had a problem when installing maps. I have YAAC installed on my Windows 10 machine since 2017, but I never used it. Yesterday I decided to configure it and to download the OSM maps for Italy (.bz2 file about 3.1 GB). I had 190 GB of disk free space. After 8 hours in the process of installing the maps in YAAC I decided to cancel the operation, assuming that something wasn't working properly. The final result is that now I have only 137 GB of free disk space! 53 GB have disappered. Where the space was eaten up? I checked in the obvious places but I could not find any files so large. Any suggestion ? 73 Giovanni

Hello, I'm completely new at this so bear with me. I have YAAC setup and seems to be working fine. I'm beaconing out and can see my station on aprs.fi. I'm trying to figure out messages. I sent out a message for APRS Thursday and on aprs.fi I can see that I'm getting responses, but I'm not getting back any messages in YAAC. In the raw packet viewer I can see I'm receiving packets from other stations, including messages, just none that are addressed for me. Do I have something set up incorrectly? I'm kind of lost here. Thanks

The radar raster map is out of position. It is centered about 100miles north of where it should actually be. Last night's rain over northern Missouri was showing up between Omaha and Des Moines. Any ideas?

I have some messages that I send on a recurring basis, such as the APRSThursday reports, POTA Spots, status reports, etc. Is it possible to somehow store a number of canned messages that I can just pick from a list that will have the TO, VIA, and message info? That way I can prepare a bunch of POTA Spot messages for various parks I frequent and other messages to just click and send? -- 73, Michael WA7SKG "Any day you do not learn one new thing is a wasted day."