开云体育

I have used the USB serial cable for radio programming with the FTM-400 and FTM-500 to provide APRS data to YAAC for several years. ?My setup is for monitoring APRS and Winlink email as well. ?This

Ah, then you shouldn't be using the Serial_TNC port type, but the Yaesu port type. Yaesu APRS-compatible radios are not KISS TNCs, and in fact do not support any transmissions from an external

Andrew, I am not using Direwolf only trying to read the packets sent from the FTM-500. ?This is just a receive station only. Tim KM4ESU

If you're using Direwolf, then Direwolf controls the PTT. YAAC does not know when your TNC has a packet to transmit and whether the RF channel is clear, so YAAC must never control PTT; only your TNC

The web app I used to create and edit the original file I got had little dots. I think that was their default and nothing actually got exported to file. Scott

Hey Andrew, Something really stupid my second monitor showed YAAC. ?I did not check it because it was shared with my work computer. This happened after I reloaded with the newest version because it

I suppose so. I was assuming that every waypoint would have some sort of symbol indicating how to display it. How did you manage to create waypoints without symbols? Worse yet, if you started with a

What did you do to fix it? Others may be interested. Andrew, KA2DDO ________________________________________ Sent: Friday, April 11, 2025 6:21 PM To: [email protected] Subject: Re: [yaac-users]

I just got a chance to try out the latest build of YAAC.? When importing a gpx file that does not have a symbol defined for the POI that are in the gpx file YAAC spits out an error and does not

Hey Andrew, I got it working and I am trying to get it set up with my FTM-500 and a digirig. Thank you! Tim KM4ESU

The first window was useless (YAAC was not actually running there), but the fact that you received absolutely no new text from typing it in the second window is really strange. It sounds like the

Hi Andrew, I held the CTL key and typed \ ? see below and I hope you can find out what I am doing wrong. I typed ctrl \ in this window and in this window

Did you type ctl-\ in the window where you had typed the "java -jar YAAC.jar" command and left that java command running in the shell foreground? This is a signal to the running foreground program

Hi Andrew, Mine is a Mac Mini M1 running Sequoia 15.4 and I typed the Control Key and \. ?I did this in the YAAC folder from the terminal. ?I also did when it stopped running after typing java -jar

Did you hold down the Control key and type the \ (not / ) key in the specific Terminal window you used to start YAAC while YAAC was still running/frozen (not in any other window, particularly not in a

Well, first off, looking at your map window, the IP blinkenlight (indicating your APRS-IS connection) is black, indicating it is working but idle. The RF blinkenlight is gray, indicating it is

i have been investigating HF aprs. for a few months now and have not been able to see map outside my very local area: and it is constant - no changes 1. ?HF APRS -yaac. 1.0-beta202 2. direwolf 3.

Hi Carl, Thank you I installed the Full JRE from your link and it still stops at the same location. ?I do hope I can get this running. Tim KM4ESU

Hi Tim, I run it on a M1 Max MBP with no issues. However I don’t use the ancient java 8. Try installing a newer Java Runtime Environment. I use the Bellsoft JDK at

Hi Andrew, I downloaded the newest version from Source Forge and installed it. ?YAAC stopped at the same place as before after the update. ?I also tried ctrl-\ and I got no real results just like