Re: HF APRS. raspberry pi OS - not seeing all maps
开云体育
Well, first off, looking at your map window, the IP blinkenlight (indicating your APRS-IS connection) is black, indicating it is working but idle. The RF blinkenlight is gray, indicating it is disconnected from Direwolf (and therefore not receiving _any_ RF
packets, VHF or HF).
You need to start Direwolf _before_ you start YAAC so YAAC has something to connect to. And you have to use the correct port type in YAAC (AGWPE or KISS-over-TCP) to match your Direwolf.
The two problems are indicating that you are only receiving Internet traffic according to your port filter settings.
Hope this helps.
Andrew, KA2DDO
author of YAAC
From:[email protected] <[email protected]> on behalf of Niece? KA1ULN via groups.io <ka1uln1@...>
Sent:?Friday, April 11, 2025 12:37:59 PM To:[email protected] <[email protected]> Subject:?[yaac-users] HF APRS. raspberry pi OS - not seeing all maps i have been investigating HF aprs. for a few months now and have not been able to see map outside my very local area: and it is constant - no changes
?
1. ?HF APRS -yaac. 1.0-beta202
2. direwolf
3. raspberry pi os (rpi5)
4. do have gps
(see current screen shot)
?
what do i need to do to see anything different… and moving?
|