开云体育

Andrew, Yep connected to the noam.aprs2.net aprsis server with password as I get the reports coming in from the net. I was curious as to drop down I have is TEMP1-1, TEMP2-2, WIDE1-1, WIDE1-1,

You will first need to have an APRS-IS server passcode for your callsign, so you can connect to the Internet backbone with permission to transmit packets to the backbone. There is no way at all to

Morning, I was wanting to send messages via the internet and I am not connected via RF, what’s the beast path to do so in making sure it goes from internet to RF? This is the home station and its

Yes, that helped. I now have YAAC sending messages. Thanks for your help! KF7EEL Eric C

You are probably transmitting positionless weather reports because your selected station APRS symbol isn't a weather station symbol. According to the APRS protocol specification, course and

I'm sure I probably have something configured incorrectly but cant seem to find the issue. My beacon reports correctly giving my longitude and latitude along with my free text. Where the problem comes

Hi Andrew, Thanks for the response. By "let the TinyTrak go into KISS mode", I meant that I put the TinyTrak into KISS mode (AMODE KISS) and left the YAAC KISS command blank. My assumption is that

What exactly do you mean by "let the TinyTrak go into KISS mode"? I also own a TinyTrak4, and one of the annoying features about it is that you can't switch back and forth between KISS and command

Hi all, I'm setting up YAAC on a Raspberry Pi 3+ running Rasbian Buster. I've downloaded and setup YAAC and I configured a Tinytrak4 to do KISS mode. The Tinytrak4 is connected to the Raspberry Pi

Bear in mind that the src and dest fields in the externally-supplied APRS packet (not just a text message) are the values to be placed in the AX.25 sender and destination address fields in the AX.25

Hello, Thank you for creating and maintaining this project, it is far better than Xastir! I am trying to use an external message port to interface with a python script the will send DMR SMS messages

Thank you. How stupid. The SSL port configuration panel is still checking the passcode length (copied and pasted from the non-SSL APRS-IS port configuration panel, since a valid passcode is required

Hi, Phil. Good to know that the SSL servers are coming back. The problem you are having has nothing to do with SSL; you'd have the same problem with a passcode APRS-IS port. The issue is that the

Just got back to the house, I have Audacity on the desktop, hadn't thought about looking for a Pi version.? Data is getting to aprs.fi as my station shows up with the correct SSID.? And you're right

If you run DireWolf from a terminal window, it should print out several lines of text describing each received packet as they come in. So, you need to confirm you're actually getting audio into the

It would be nice to have the map and features of YAAC available. I had trying running Direwolf alone, but it wasn't apparent that anything was being decoded.? I could hear the local WX station in the

YAAC does not have any TNC modem capability built into it; it expects you to provide some external implementation (in hardware or software). Given you're using a Raspberry Pi with UDRC-II, your best

Hi, I'm new here, I've spent a few hours with a Raspberry Pi and a URDC II interface trying to set up an Igate/Digipeater.? Our local Igate has failed.? Getting to the point, I wanted to use YAAC

??? Thanks Andrew :)

next beta build#147 of YAAC ("Yet Another APRS Client"), created 2020-Jan-23 downloadable from https://www.ka2ddo.org/ka2ddo/YAAC.html or