I run it on Kubuntu 20.04.1 with no issues at all...
Jeff Lehman, N8ACL E-mail: N8ACL@...Hamshack Hotline: 4218 Website: https://n8acl.ddns.net
toggle quoted message
Show quoted text
VE2PCQ
It worked great for me until I remodeled my Office/Shack and I am about ready to put it back on line with a new Davis Weather Station. So we will see how it runs once we get it back up and running with the new weather station. By the way it is on a Quad core 16 Gb machine. I hope this helps.
-- ?Thank You and God Bless? Richard
On Wed, Oct 21, 2020 at 11:19 AM Pascal Charette < ve2pcq@...> wrote: Currently running YAAC on Ubuntu 18.04, did someone test it on 20.04? Will it work correctly?
Thanks for YAAC I really really like it.... Nice job ;)
VE2PCQ, 73
|
Re: Winlink sending email problem
For your?info. I've used Windows APRIS32, my Aprsdroid Pad. using message This format should work with any Aprs program like YAAC.
APRSLinkAPRSLink is a CMS-Hosted gateway providing a link between the Automatic Packet Reporting System (APRS) and the Winlink global radio email system. APRSLink monitors all APRS traffic gated to the internet, worldwide, and watches for special commands that allow APRS users to: - read short email messages sent to their?callsign@...?account (only the base callsign, no SSID)
- send short email messages to any valid email address or Winlink 2000 user
- perform email related maintenance (see commands below)
- be notified of pending Winlink email via APRS message
- query APRSLink for information of the closest Winlink RMS packet station
APRSLink provides a very special capability for the Kenwood TH-D7, TM-D700 and TM-D710 Radios for sending and receiving email from the radio front Panel without any need for a PC. Properly licensed Amateur Radio operators are automatically registered in the Winlink system the first time they send a message through the system. For someone to send email to you, you must first become registered by sending a message through the system. Your Winlink account cannot be established using APRSLink -- you must first create your Winlink email account before you can use APRSLink. See??for more information. Additionally, your APRS station must have sent at least one APRS position report (beacon) prior to attempting to access this service. In that way, APRSLink can know your Amateur callsign, location, and station type for use with some commands. LOGIN -
Send any characters to initiate login. The CMS will respond with a challenge consisting of three digits who's values represent positions of characters within your password. See 'RESP'. RESP -
This is a six character response to the login challenge. Respond with three password characters corresponding to the positions in the challenge plus three additional characters of your choosing (in any order). Example: Password is AbC123. Login challenge is: 425. You send '1b2Qz5'. AbZ21t would also be valid since it contains the characters 1, b, and 2 which correspond to the 4th, 2nd, and 5th character in your password. 123456 AbC123 I use this format to figure out what number or letter I send 1b2xuq because these represent the password in the 1 to six numbers
LOGOFF -
Your login will expire after approximately two hours. You can manually log out anytime by issuing the "B" or "BYE" command. 73
Don Poaps
New Westminster, BC
VA7DGP DATA VA7QU ? VOICE
Subject://wl2k ? ? ? ? ??
 ? ? ? ? ? ? ? ? ? ??
  ??
?
On Wed, Oct 21, 2020 at 2:57 PM Bill AA6BD < bill@...> wrote: I use Winlink daily from other clients including Winlink Express and PAT, and I run a gateway station on 2M FM, so yes, I have accessed Winlink many times.
--Bill AA6BD
|
Re: Winlink sending email problem
I use Winlink daily from other clients including Winlink Express and PAT, and I run a gateway station on 2M FM, so yes, I have accessed Winlink many times.
--Bill AA6BD
|
Re: Winlink sending email problem
Have you accessed Winlink by other means previously? Apparently, you can't use Winlink from APRS unless your account has been accessed by another means first. ________________________________________ From: [email protected] < [email protected]> on behalf of Bill AA6BD <bill@...> Sent: Wednesday, October 21, 2020 5:45 PM To: [email protected]Subject: [yaac-users] Winlink sending email problem I am running YAAC 1.0-beta157 I sent an email using Message > Station > Recipient Callsign: EMAIL This worked fine. I tried to send an email using Message > Send Email I entered the To, Subject, and Message text. I was asked for my Winlink password and I entered that. In the messages window, I see [cid: [email protected]] The message does not go through. That is, I don't get the email in the email service where I sent it, which was the same email address I used in Message > Station > Recipient Callsign: EMAIL I tried a second time and got: [cid: [email protected]] How do I send an email via Winlink? --Bill AA6BD
|
Winlink sending email problem
I am running YAAC 1.0-beta157 I sent an email using Message > Station > Recipient Callsign: EMAIL This worked fine. I tried to send an email using Message > Send Email I entered the To, Subject, and Message text. I was asked for my Winlink password and I entered that. In the messages window, I see?  The message does not go through.? That is, I don't get the email in the email service where I sent it, which was the same email address I used in Message > Station > Recipient Callsign: EMAIL I tried a second time and got:  How do I send an email via Winlink? --Bill AA6BD
|
Re: Desktop shortcut for YAAC
toggle quoted message
Show quoted text
On Oct 21, 2020, at 2:06 PM, Greg D <ko6th.greg@...> wrote:
?
The difference between Executing and Executing in Terminal is that
the later does what it says, opening a terminal shell, and from
there, opening the desired application.? In practice, the only
advantage of opening with the terminal is that you get to see any
errors or diagnostics that the application logs to standard out, and
can easily kill the program if the window goes away but doesn't
fully exit.? The disadvantage is that you have another program
running (the terminal shell), which could be a problem if you're
constrained on RAM memory space.? It's also extra screen clutter.
Command-line applications, i.e. ones that don't open a GUI window,
need to be run from a terminal shell.? YAAC isn't such a program.?
Unless you need the terminal window for some reason, just choose
Execute.
Greg? KO6TH
WB9EZB wrote:
Raspberry Pi ? ?Raspian
On Tue, Oct 20, 2020 at
10:29 PM Andrew P. < andrewemt@...>
wrote:
On what
operating system are you creating this shortcut?
________________________________________
From: [email protected] <[email protected]> on
behalf of WB9EZB <pikemike999@...>
Sent: Tuesday, October 20, 2020 11:09 PM
To: [email protected]
Subject: [yaac-users] Desktop shortcut for YAAC
I created a desktop shortcut.? Works great.? When I click it
it gives me two options, Execute or Execute in Terminal.
Both options seem to work.? What is the difference between
these options ?
Thanks
|
Re: Desktop shortcut for YAAC
The difference between Executing and Executing in Terminal is that
the later does what it says, opening a terminal shell, and from
there, opening the desired application.? In practice, the only
advantage of opening with the terminal is that you get to see any
errors or diagnostics that the application logs to standard out, and
can easily kill the program if the window goes away but doesn't
fully exit.? The disadvantage is that you have another program
running (the terminal shell), which could be a problem if you're
constrained on RAM memory space.? It's also extra screen clutter.
Command-line applications, i.e. ones that don't open a GUI window,
need to be run from a terminal shell.? YAAC isn't such a program.?
Unless you need the terminal window for some reason, just choose
Execute.
Greg? KO6TH
WB9EZB wrote:
toggle quoted message
Show quoted text
Raspberry Pi ? ?Raspian
On Tue, Oct 20, 2020 at
10:29 PM Andrew P. < andrewemt@...>
wrote:
On what
operating system are you creating this shortcut?
________________________________________
From: [email protected] <[email protected]> on
behalf of WB9EZB <pikemike999@...>
Sent: Tuesday, October 20, 2020 11:09 PM
To: [email protected]
Subject: [yaac-users] Desktop shortcut for YAAC
I created a desktop shortcut.? Works great.? When I click it
it gives me two options, Execute or Execute in Terminal.
Both options seem to work.? What is the difference between
these options ?
Thanks
|
VE2PCQ
It worked great for me until I remodeled my Office/Shack and I am about ready to put it back on line with a new Davis Weather Station. So we will see how it runs once we get it back up and running with the new weather station. By the way it is on a Quad core 16 Gb machine. I hope this helps.
-- Thank You and God Bless? Richard
On Wed, Oct 21, 2020 at 11:19 AM Pascal Charette < ve2pcq@...> wrote: Currently running YAAC on Ubuntu 18.04, did someone test it on 20.04? Will it work correctly?
Thanks for YAAC I really really like it.... Nice job ;)
VE2PCQ, 73
|
Currently running YAAC on Ubuntu 18.04, did someone test it on 20.04? Will it work correctly?
Thanks for YAAC I really really like it.... Nice job ;)
VE2PCQ, 73
|
Re: Desktop shortcut for YAAC
toggle quoted message
Show quoted text
On Tue, Oct 20, 2020 at 10:29 PM Andrew P. < andrewemt@...> wrote: On what operating system are you creating this shortcut?
________________________________________
From: [email protected] <[email protected]> on behalf of WB9EZB <pikemike999@...>
Sent: Tuesday, October 20, 2020 11:09 PM
To: [email protected]
Subject: [yaac-users] Desktop shortcut for YAAC
I created a desktop shortcut.? Works great.? When I click it it gives me two options, Execute or Execute in Terminal.
Both options seem to work.? What is the difference between these options ?
Thanks
|
Re: Desktop shortcut for YAAC
On what operating system are you creating this shortcut? ________________________________________ From: [email protected] < [email protected]> on behalf of WB9EZB <pikemike999@...> Sent: Tuesday, October 20, 2020 11:09 PM To: [email protected]Subject: [yaac-users] Desktop shortcut for YAAC I created a desktop shortcut. Works great. When I click it it gives me two options, Execute or Execute in Terminal. Both options seem to work. What is the difference between these options ? Thanks
|
Desktop shortcut for YAAC
I created a desktop shortcut. ?Works great. ?When I click it it gives me two options, Execute or Execute in Terminal.
Both options seem to work. ?What is the difference between these options ?
Thanks
|
I thing I look in Preference 3 times, then after your reply I went again on Preference then it was there lol
Thanks ?
Le mar. 20 oct. 2020 à 14:15, Andrew P. < andrewemt@...> a écrit?: On the Preference tab, look for "Enable memory utilization bar".
________________________________________
From: [email protected] <[email protected]> on behalf of Pascal Charette <ve2pcq@...>
Sent: Tuesday, October 20, 2020 2:03 PM
To: [email protected]
Subject: Re: [yaac-users] Memory Usage Bar
In expert mode config look at / general/transmit/.... can’t figure it out where to enable...
Le mar. 20 oct. 2020 à 13:56, WB9EZB <pikemike999@...<mailto:pikemike999@...>> a écrit :
You don’t need plug in. Memory bar can be seen if you enable it in configuration
On Oct 20, 2020, at 12:52 PM, Pascal Charette <ve2pcq@...<mailto:ve2pcq@...>> wrote:
?
Did I need to install a plugins or where exactly is that Memory Bar and garbages icon? Can’t find where or what to enable.
Running last Yaac on Ubuntu’s 18.04.5
Thanks
Ve2pcq
Le mar. 20 oct. 2020 à 12:43, WB9EZB <pikemike999@...<mailto:pikemike999@...>> a écrit :
Can someone tell me how the memory bar works, why does it show 93 MB max, what does the garbage icon do ?
?Thanks and 73
|
FileConfiguration? Preferences checkbox Display Memory Bar
toggle quoted message
Show quoted text
On Oct 20, 2020, at 1:04 PM, Pascal Charette <ve2pcq@...> wrote:
? In expert mode config look at / general/transmit/.... can’t figure it out where to enable...
You don’t need plug in. Memory bar can be seen if you enable it in configuration On Oct 20, 2020, at 12:52 PM, Pascal Charette <ve2pcq@...> wrote:
? Did I need to install a plugins or where exactly is that Memory Bar and garbages icon? Can’t find where or what to enable. Running last Yaac on Ubuntu’s 18.04.5
Thanks Ve2pcq? Can someone tell me how the memory bar works, why does it show 93 MB max, what does the garbage icon do ?
?Thanks and 73
|
On the Preference tab, look for "Enable memory utilization bar". ________________________________________ From: [email protected] < [email protected]> on behalf of Pascal Charette <ve2pcq@...> Sent: Tuesday, October 20, 2020 2:03 PM To: [email protected]Subject: Re: [yaac-users] Memory Usage Bar In expert mode config look at / general/transmit/.... can’t figure it out where to enable... Le mar. 20 oct. 2020 à 13:56, WB9EZB <pikemike999@...<mailto:pikemike999@...>> a écrit : You don’t need plug in. Memory bar can be seen if you enable it in configuration On Oct 20, 2020, at 12:52 PM, Pascal Charette <ve2pcq@...<mailto:ve2pcq@...>> wrote: ? Did I need to install a plugins or where exactly is that Memory Bar and garbages icon? Can’t find where or what to enable. Running last Yaac on Ubuntu’s 18.04.5 Thanks Ve2pcq Le mar. 20 oct. 2020 à 12:43, WB9EZB <pikemike999@...<mailto:pikemike999@...>> a écrit : Can someone tell me how the memory bar works, why does it show 93 MB max, what does the garbage icon do ? Thanks and 73
|
In expert mode config look at / general/transmit/.... can’t figure it out where to enable...
You don’t need plug in. Memory bar can be seen if you enable it in configuration On Oct 20, 2020, at 12:52 PM, Pascal Charette <ve2pcq@...> wrote:
? Did I need to install a plugins or where exactly is that Memory Bar and garbages icon? Can’t find where or what to enable. Running last Yaac on Ubuntu’s 18.04.5
Thanks Ve2pcq? Can someone tell me how the memory bar works, why does it show 93 MB max, what does the garbage icon do ?
?Thanks and 73
|
File Configuration? Preferences checkbox Display Memory Bar
toggle quoted message
Show quoted text
On Oct 20, 2020, at 12:52 PM, Pascal Charette <ve2pcq@...> wrote:
? Did I need to install a plugins or where exactly is that Memory Bar and garbages icon? Can’t find where or what to enable. Running last Yaac on Ubuntu’s 18.04.5
Thanks Ve2pcq? Can someone tell me how the memory bar works, why does it show 93 MB max, what does the garbage icon do ?
?Thanks and 73
|
To be more precise, it is enabled from the expert-mode Configuration dialog's Preferences tab. ________________________________________ From: [email protected] < [email protected]> on behalf of WB9EZB <pikemike999@...> Sent: Tuesday, October 20, 2020 1:55 PM To: [email protected]Subject: Re: [yaac-users] Memory Usage Bar You don’t need plug in. Memory bar can be seen if you enable it in configuration On Oct 20, 2020, at 12:52 PM, Pascal Charette <ve2pcq@...> wrote: ? Did I need to install a plugins or where exactly is that Memory Bar and garbages icon? Can’t find where or what to enable. Running last Yaac on Ubuntu’s 18.04.5 Thanks Ve2pcq Le mar. 20 oct. 2020 à 12:43, WB9EZB <pikemike999@...<mailto:pikemike999@...>> a écrit : Can someone tell me how the memory bar works, why does it show 93 MB max, what does the garbage icon do ? Thanks and 73
|
You don’t need plug in. Memory bar can be seen if you enable it in configuration
toggle quoted message
Show quoted text
On Oct 20, 2020, at 12:52 PM, Pascal Charette <ve2pcq@...> wrote:
? Did I need to install a plugins or where exactly is that Memory Bar and garbages icon? Can’t find where or what to enable. Running last Yaac on Ubuntu’s 18.04.5
Thanks Ve2pcq? Can someone tell me how the memory bar works, why does it show 93 MB max, what does the garbage icon do ?
?Thanks and 73
|
Did I need to install a plugins or where exactly is that Memory Bar and garbages icon? Can’t find where or what to enable. Running last Yaac on Ubuntu’s 18.04.5
Thanks Ve2pcq?
Can someone tell me how the memory bar works, why does it show 93 MB max, what does the garbage icon do ?
?Thanks and 73
|
