开云体育

No, that's the one that's probably going to melt your Pi, assuming you have enough non-SD-card storage to handle the import (an SD card can't handle the number of write cycles involved in an import),

ok, YAAC installed, downloading geofabrik north america pbf file. should be done in about an hour or more hope that the right one Dave Garber VE3WEJ / VE3IE

I will install again on the Rpi3+, and advise of any errors, and I will be sure to wait the 10 minutes, at least will advise, soon Dave Garber VE3WEJ / VE3IE

Tha is what I did, except in my case I did it on a Mac. It worked without any fuss. Clark Martin KK6ISP

You don't need to check WIDE2 (or any other digipeat alias) on any port unless you are planning to operate as a digipeater through that port. All we are talking about here are the requests in your

Hi Andrew Maybe I have some settings wrong. On the digipeat tab I have WIDE2-2 checked in aliases for digipeating and WIDE2-2 as selected digipeat path. Under Beacon I have WIDE2-2 as selected

Can you send your AX25rcvd*.csv file from when you tried to link? Apparently, the Winlink website is not quite accurate about the details of the login message format. I would like to see exactly what

Not sure the full functions are there. Winlink does require a password. Where can we enter such? [email protected]> wrote:

"Hi, I'd like to hear a TCP joke." "Hello, would you like to hear a TCP joke?" "Yes, I'd like to hear a TCP joke." "OK, I'll tell you a TCP joke." "Ok, I will hear a TCP joke." "Are you ready to hear

No, my concern is that your beacon was using the proportional pathing of -- direct -- WIDE1-1, WIDE1-1,WIDE2-1 which, if your nearest I-gate still required a digipeat hop, would cause all the --

Hi Andrew The digi specs are as follows: Status message WIDE2-2 with a text of FN13kw CumulusMX on a Raspberry Pi 3 Beacon WIDE2-2 with a text of 21 Fennell Crescent, Cherry Valley WX Station Would

Love a good protocol joke! Just toss it out there! [email protected]> wrote:

When I try to send an email via Winlink using the Message -> Send E-Mail function, it seems like the LOGIN feature isn't working. I see my station sending LOGIN to WLNK-1, and a response from WLNK-1

That's an interesting observation. What are the digipeater specifications for your beacon versus your status? If you can't reach an I-gate without being digipeated, then beacon transmissions without

Two UDP packets walk into a bar... Two UDP packets walk into a bar...

Hi Andrew Do you have further thoughts on this?? Are my settings correct?? The issue seems to be that the status messages get digipeated more than the beacon.because yaac is indeed making the

Hmmm... indeed, you haven't made much progress on the download. Can you replicate this and then after it hangs for more than 10 minutes (or if it times out by them), send me the YAAC.out file from

Already got the joke (from someone else). And land-line UDP is probably more reliable than radio AX.25.

I am the one Chris was referring to. I am trying to download 100 kms radius. here is a copy of my captured screen...? ?not really an error, it just will not proceed to download can I download via

I could tell you a joke about UDP but you might not get.