¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: Beacon and Status message timing


 

No, my concern is that your beacon was using the proportional pathing of
-- direct --
WIDE1-1,
WIDE1-1,WIDE2-1
which, if your nearest I-gate still required a digipeat hop, would cause all the -- direct -- (no digpeat aliases) beacon packets to not make it to the I-gate.

Similarly, if there are no WIDE1-1 fill-in digis, the packets could have been dropped if the local WIDE2 digis wouldn't also accept WIDE1.

Andrew, KA2DDO
author of YAAC

________________________________________
From: [email protected] <[email protected]> on behalf of Joseph LaFerla <joe@...>
Sent: Monday, August 3, 2020 7:33 PM
To: [email protected]
Subject: Re: [yaac-users] Beacon and Status message timing

Hi Andrew

The digi specs are as follows:

Status message WIDE2-2 with a text of FN13kw CumulusMX on a Raspberry Pi 3
Beacon WIDE2-2 with a text of 21 Fennell Crescent, Cherry Valley WX Station

Would you suggest changing one to WIDE2-1??

Thanks for your help.

Joe VA3JLF


Sent from Mail<> for Windows 10

From: Andrew P.<mailto:andrewemt@...>
Sent: August 3, 2020 5:18 PM
To: [email protected]<mailto:[email protected]>
Subject: Re: [yaac-users] Beacon and Status message timing

That's an interesting observation. What are the digipeater specifications for your beacon versus your status? If you can't reach an I-gate without being digipeated, then beacon transmissions without sufficient digipeat aliases (such as WIDE2-2) might not ever get digipeated, whereas if your status only uses WIDE2-2, it would be digipeated all the time.

What are your beacon and status settings, especially regarding digipeat aliases (possibly using proportional pathing)?

Andrew, KA2DDO
author of YAAC

________________________________________
From: [email protected] <[email protected]> on behalf of Joseph LaFerla <joe@...>
Sent: Monday, August 3, 2020 5:11 PM
To: [email protected]
Subject: Re: [yaac-users] Beacon and Status message timing

Hi Andrew

Do you have further thoughts on this? Are my settings correct? The issue seems to be that the status messages get digipeated more than the beacon.because yaac is indeed making the transmissions as far as I can see.

Joe VA3JLF

Join [email protected] to automatically receive all group messages.