开云体育

You're welcome! -- Cheers and 73 - Jon N7UV

The View>Aircraft list/table shows many dozens of a/c updating at intervals of 0-1 second. I'm fairly sure that it's not due to dropped or discarded packets. My point was about the somewhat random

Thank you for pointing this out. I used to allow people to download the plugin distributions manually from the website by hyperlinks here, but I noticed in my web server logs that the vast majority of

Duh. The easiest thing was the most obvious. I went to View>Layers>Show Dead Reckoning and turned it off. My bad. -- Cheers and 73 - Jon N7UV

I actually noticed this some time back, but forgot to ask about it. The instructions highlighted in yellow suggest that there are links for each of the plugin names. However, at least on my Chrome

Hi Andrew - Thanks for the info. I went to port setup and dialed it down to 1 min, and that seemed to help. My mobile ADS-B setup is fairly sensitive. I don't worry about random a/c at extreme

Greetings. The ADS-B timeout parameter is in the port configuration panel for that port type. It's a control that allows you to set a time between 1 to 60 minutes. So go to File->Configure->Expert

Thanks for the update, Andrew, especially for the attention to ADS-B. In searching through the new version, I haven't located the part about " 11. in the ADS-B plugin, set the inactive station time

next beta build#198 of YAAC ("Yet Another APRS Client"), created 2024-May-21 downloadable from https://www.ka2ddo.org/ka2ddo/YAAC.html or

Just to be clear, you don't need a hardware TNC - only the soft TNC as Andrew pointed out. The DigiRig connects and talks to the radio, The soft TNC talks to the DigRig, and YAAC talks to the soft

Thank you all for your replies. I did not realize I needed a software TNC as well.? I will work on this. Again, thank you ! 73 Eric

More than that, it also does CAT data on the same COM port. But yes, still needs a TNC. 73 Danny, K5CG HH 550-000-0609 SKCC 14257 To: "yaac-users" <yaac-users@groups.io> Sent: Sunday, May

Bear in mind that a DigiRig is not a TNC; a DigiRig is a sound card interface to a radio, with a serial port used solely for PTT control. You will need to run some sort of software TNC program to use

I have Windows 10 Pro using a DigiRig on an IC-7000. 73 Danny, K5CG HH 550-000-0609 SKCC 14257 To: "yaac-users" <yaac-users@groups.io> Sent: Sunday, May 5, 2024 9:58:59 AM Subject:

Hi All, I have a iCom IC-8000 and Digirig interface on a Windows10 box, and I am having trouble getting YAAC to work.? I have set up a port for Serial_TNC in KISS Only and TX is locked on.? I have

It’s a conspiracy - I blame Big Geography

This is what I'm seeing... Best Jeremy

Hi Andrew - View>Layers>Show age was and remains on. The time since last position update is always displayed in small text below the main label. However, the value rarely changes. If I do

Hmmm.... Sounds like I forgot to refresh the map when the position of an ADS-B station changes its position. You can work around this by checking the menu choice View->Map Layers->Show Age. This

CATS?