Thank you all for your replies.
I did not realize I needed a software TNC as well.? I will work
on this.
Again, thank you !
73 Eric
On 5/5/24 17:49, Danny K5CG wrote:
toggle quoted message
Show quoted text
>with a serial port used solely for PTT control.
More than that, it also does CAT data on the same COM port.
But yes, still needs a TNC.
73
Danny, K5CG
HH 550-000-0609
SKCC 14257
From: "Andrew"
<andrewemt@...>
To: "yaac-users"
<[email protected]>
Sent: Sunday, May 5, 2024 4:37:15 PM
Subject: Re: [yaac-users] Configure Digirig on Windows
10 for YAAC
Bear in mind that a DigiRig is
not a TNC; a DigiRig is a sound card interface to a radio,
with a serial port used solely for PTT control.
You will need to run some sort of software TNC program to
use a DigiRig for APRS. Since you are using Microsoft
Windows, you will want to use AGWPE, UZ7HO Soundmodem, or
Direwolf. Once the software TNC is working with the DigiRig,
you can config YAAC to use an AGWPE port to connect to the
software TNC.
Hope this helps.
Andrew, KA2DDO
author of YAAC
Sent:
Sunday, May 5, 2024 5:06:12 PM
Hi All,
I have a iCom IC-8000 and Digirig interface on a Windows10
box, and I am having trouble getting YAAC to work.? I have
set up a port for Serial_TNC in KISS Only and TX is locked
on.? I have set RTS on and YAAC throws java errors.
Has anyone met with success using a Digirig on Win10?
73 Eric
Eric Nisenfeld