Re: SMS Messages not going through
SMSGTE was shut down by the team that ran it weeks ago
|
Re: SMS Messages not going through
I also just noticed this...
Jun 27 13:52:56 APRS-iGate direwolf[521]: [0.4] KF7OLB-10>APDW16,N7ISP-10*:}KE6BLR-7>APK102,TCPIP,KF7OLB-10*::KD7WPQ-7 :rej43
Jun 27 13:52:56 APRS-iGate direwolf[521]: "KE6BLR-7" REJected message number "43" from "KD7WPQ-7", Kenwood D710
Jun 27 13:52:59 APRS-iGate direwolf[521]: [ig>tx] KE6BLR-7>S33WXR,N6EX-4*,qAR,KF6NMZ-4:`-GKl*<0x1c>K\]"4q}CAMPING TONIGHT=
Jun 27 13:53:00 APRS-iGate direwolf[521]: Digipeater N7ISP-10 audio level = 84(13/8)?? [NONE]?? __||||___
Jun 27 13:53:00 APRS-iGate direwolf[521]: [0.3] KF7OLB-10>APDW16,N7ISP-10*:}KE6BLR-7>APK102,TCPIP,KF7OLB-10*::KD7WPQ-7 :rej45
Jun 27 13:53:00 APRS-iGate direwolf[521]: "KE6BLR-7" REJected message number "45" from "KD7WPQ-7", Kenwood D710
Jun 27 13:53:02 APRS-iGate direwolf[521]: Digipeater N7ISP-10 audio level = 76(14/9)?? [NONE]?? __|||||__
Jun 27 13:53:02 APRS-iGate direwolf[521]: [0.4] KF7OLB-10>APDW16,N7ISP-10*:}KE6BLR-7>S33WXR,TCPIP,KF7OLB-10*:`-GKl*<0x1c>K\]"4q}CAMPING TONIGHT=
Thing is, this is directly to my igate, I'm sitting next to it, it should have gone out my igate not sent to another, if that is the case.
|
Re: SMS Messages not going through
OK, I just tried via my handheld and didn't get a text, here is what direwolf said in it's logs...
[0.4] KD7WPQ-7>APY03D,WIDE1-1,WIDE2-1::SMSGTE?? :@208####### Hi{45<0x0d>
The APRS protocol specification says nothing about a possible carriage return after the
message id.? Adding CR might prevent proper interoperability with with other applications.
APRS Message, number "45", from "KD7WPQ-7" to "SMSGTE", Yaesu FT3D series
@208####### Hi
SMSGTE>APSMS1,TCPIP,qAS,VE3OTB-12::KD7WPQ-7 :ack45
|
Re: SMS Messages not going through
The ones from 6-24 were over the weekend, and sent over the air from a remote offline site.
In this case I am connecting directly to my igate on my network.
There should have been sent test messages on 6-26 and 6-27
As far as I know OUTNET is supposed to be out my local internet connection via my igate
The reason I am troubleshooting this is if it is supposed to be working and my igate is the problem I should fix it or my igate is not doing what it should be doing.
However with that said, if I broadcast via my handheld over the air the messages do seem to go through.
|
Re: SMS Messages not going through
Patrick,
One thing that appears very odd is that you are specifying OUTNET as your one and only digipeater alias. As such, unless you are within direct (no-digipeat) range of an I-gate, your message will never
get to the SMSGTE server because it will never get to get to the APRS-IS backbone; most digipeaters willnot recognize OUTNET as an alias they support. Or is OUTNET the tactical name of a digipeater in your immediate vicinity?
Andrew, KA2DDO
author of YAAC
Can you do another test??? Your last interaction from KD7WPQ (2023-06-24 18:21:25 EDT, apparently an attempt to go through the ISS according to the path) rolled off the aprs.fi raw packets display for SMSGTE about 1 hour after that
time.?? Unless you were using a different -SSID more recently?
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 6/27/2023 6:25 AM, Patrick wrote:
I posted this in the direwolf thread as well as I'm not sure if it's a YAAC issue or a direwolf issue but here is the problem....
If I try to send a sms message via YAAC connected to direwolf via my local network the message never makes it through.
I am able to send messages, or I think I am but not SMS for some reason.
Here is my YAAC port configuration...
Here is the message in the direwolf log when I attempt to send a sms....
[0L] KD7WPQ>APJYC1,OUTNET::SMSGTE?? :@208####### testing{m000a
Anyone have any ideas on what I'm missing?
_._,_.
_._,_._,_
|
Re: SMS Messages not going through
Can you do another test??? Your last
interaction from KD7WPQ (2023-06-24 18:21:25 EDT, apparently an
attempt to go through the ISS according to the path) rolled off
the aprs.fi raw packets display for SMSGTE about 1 hour after that
time.?? Unless you were using a different -SSID more recently?
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 6/27/2023 6:25 AM, Patrick wrote:
toggle quoted message
Show quoted text
I posted this in the direwolf thread as well as I'm not sure if
it's a YAAC issue or a direwolf issue but here is the
problem....
If I try to send a sms message via YAAC connected to direwolf
via my local network the message never makes it through.
I am able to send messages, or I think I am but not SMS for some
reason.
Here is my YAAC port configuration...
Here is the message in the direwolf log when I attempt to send a
sms....
[0L] KD7WPQ>APJYC1,OUTNET::SMSGTE?? :@208#######
testing{m000a
Anyone have any ideas on what I'm missing?
|
Re: SMS Messages not going through
If you check the aprs.fi logs, SMSGTE is
actually online and working, regardless of what their web page
says.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 6/27/2023 7:58 AM, km4ack wrote:
toggle quoted message
Show quoted text
The SMSGTE service is offline. See for
details.
73, de KM4ACK
|
Re: SMS Messages not going through
The SMSGTE service is offline. See for details.
73, de KM4ACK
|
SMS Messages not going through
I posted this in the direwolf thread as well as I'm not sure if it's a YAAC issue or a direwolf issue but here is the problem....
If I try to send a sms message via YAAC connected to direwolf via my local network the message never makes it through.
I am able to send messages, or I think I am but not SMS for some reason.
Here is my YAAC port configuration...
Here is the message in the direwolf log when I attempt to send a sms....
[0L] KD7WPQ>APJYC1,OUTNET::SMSGTE?? :@208####### testing{m000a
Anyone have any ideas on what I'm missing?
|
Map labelling (was: Re: Font/icon size)
Map labelling is displayed based on the current map zoom level and the type of item being labelled. For example, the name of a tiny hamlet would stop being rendered sooner upon zooming out than the name of an entire province would be. The exact
default zoom level settings were chosen based on the density of map features in my area (since I look at that part of the map the most).
However, those defaults might not be appropriate for your area. The settings can be changed by going to View->Layers...->Select Geographical Map Layers, and adjusting the zoom level numbers on the tabular lists for Ways and Places.
toggle quoted message
Show quoted text
Andrew,?
OK, got it. Now another small problem: the maps are not showing anymore the names of places
( I mean towns, villages. localities etc. ). The only names that appear are those of rivers (!!).?
I have the impression that it was not like so when? I started, so maybe I have messed up something!
I appreciate all the effort you are doing to support this nice piece of software!?
73 Giovanni iz5pqt?
_._,_._,_
|
Re: Font/icon size (was: Re: [yaac-users] Disk space issue)
Andrew,?
OK, got it. Now another small problem: the maps are not showing anymore the names of places ( I mean towns, villages. localities etc. ). The only names that appear are those of rivers (!!).? I have the impression that it was not like so when? I started, so maybe I have messed up something! I appreciate all the effort you are doing to support this nice piece of software!?
73 Giovanni iz5pqt?
Il giorno mer 7 giu 2023 alle ore 15:04 Andrew P. < andrewemt@...> ha scritto:
No, it was me forgetting where I put it. It's actually on the View menu, specifically View->Layers...->Show Double-Sized Icons.
Andrew, KA2DDO
author of YAAC (program now 12 years old!)
Andrew,
I think there is a disgreement between the versions. I am using 1.0-beta181 (Windows) and I do not see any checkbox in the preference tab to choose double-sized icons. See attached image below.?
Also, when I right-click on the icon of a station, there is no "Show Double-Sized Icon" in the Menu.
The only way it works for me is to select the station for tacking and then to tick the Double-Sized checkbox in the track list
|
Re: Font/icon size (was: Re: [yaac-users] Disk space issue)
Also, I forgot that the individual double-sizing control is in the Tracked Stations table view, so you have to Track This Station to get it on the list so you can pick double-sizing its icon.
Andrew, KA2DDO
No, it was me forgetting where I put it. It's actually on the View menu, specifically View->Layers...->Show Double-Sized Icons.
Andrew, KA2DDO
author of YAAC (program now 12 years old!)
Andrew,
I think there is a disgreement between the versions. I am using 1.0-beta181 (Windows) and I do not see any checkbox in the preference tab to choose double-sized icons. See attached image below.?
Also, when I right-click on the icon of a station, there is no "Show Double-Sized Icon" in the Menu.
The only way it works for me is to select the station for tacking and then to tick the Double-Sized checkbox in the track list
_._,_._,_
|
Re: Font/icon size (was: Re: [yaac-users] Disk space issue)
No, it was me forgetting where I put it. It's actually on the View menu, specifically View->Layers...->Show Double-Sized Icons.
Andrew, KA2DDO
author of YAAC (program now 12 years old!)
Andrew,
I think there is a disgreement between the versions. I am using 1.0-beta181 (Windows) and I do not see any checkbox in the preference tab to choose double-sized icons. See attached image below.?
Also, when I right-click on the icon of a station, there is no "Show Double-Sized Icon" in the Menu.
The only way it works for me is to select the station for tacking and then to tick the Double-Sized checkbox in the track list
_._,_._,_
|
Re: Font/icon size (was: Re: [yaac-users] Disk space issue)
Andrew,
I think there is a disgreement between the versions. I am using 1.0-beta181 (Windows) and I do not see any checkbox in the preference tab to choose double-sized icons. See attached image below.?
Also, when I right-click on the icon of a station, there is no "Show Double-Sized Icon" in the Menu.
The only way it works for me is to select the station for tacking and then to tick the Double-Sized checkbox in the track list
Il giorno mar 6 giu 2023 alle ore 22:49 Andrew P. < andrewemt@...> ha scritto:
A little excessive, deleting the entire directory. You might want to keep the log directory, which not only holds debugging logs, but also logs every transmission you make with YAAC, should you need
this information to comply with logging regulations in your jurisdiction.
As to icon and font size, that is easy to adjust. It depends on whether you want to do it for all stations, or only stations of interest.
Font size is adjusted from the expert-mode Configuration dialog's Preferences tab; the map normally uses proportional-spaced fonts, whereas fixed-size fonts are typically used in table views so the
values in different rows line up. The Preferences tab also has a checkbox for choosing double-sized icons for all stations/objects.
If you only want to enlarge stations of interest, right-click on the icon, and select Show Double-Sized Icon. The View->Tracked Stations table shows all stations and objects you have special settings
for. If you double icon size for a station when Preferences specify double-size for everyone, the selected station will get a quadruple-sized icon.
Hope this helps.
Andrew, KA2DDO
author of YAAC
Hi Andrew,
thank you for the info. I deleted the $HOME/YAAC directory and I recovered the disk space. Then I used the option to download the tiles directly and everything was ok in about 10 minutes.
I have another question: is it possible to enlarge the station icons and the markings on the map using maybe bold fonts??
73 Giovanni IZ5PQT
|
Font/icon size (was: Re: [yaac-users] Disk space issue)
A little excessive, deleting the entire directory. You might want to keep the log directory, which not only holds debugging logs, but also logs every transmission you make with YAAC, should you need
this information to comply with logging regulations in your jurisdiction.
As to icon and font size, that is easy to adjust. It depends on whether you want to do it for all stations, or only stations of interest.
Font size is adjusted from the expert-mode Configuration dialog's Preferences tab; the map normally uses proportional-spaced fonts, whereas fixed-size fonts are typically used in table views so the
values in different rows line up. The Preferences tab also has a checkbox for choosing double-sized icons for all stations/objects.
If you only want to enlarge stations of interest, right-click on the icon, and select Show Double-Sized Icon. The View->Tracked Stations table shows all stations and objects you have special settings
for. If you double icon size for a station when Preferences specify double-size for everyone, the selected station will get a quadruple-sized icon.
Hope this helps.
Andrew, KA2DDO
author of YAAC
Hi Andrew,
thank you for the info. I deleted the $HOME/YAAC directory and I recovered the disk space. Then I used the option to download the tiles directly and everything was ok in about 10 minutes.
I have another question: is it possible to enlarge the station icons and the markings on the map using maybe bold fonts??
73 Giovanni IZ5PQT
_._,_._,_
|
Hi Andrew,
thank you for the info. I deleted the $HOME/YAAC directory and I recovered the disk space. Then I used the option to download the tiles directly and everything was ok in about 10 minutes.
I have another question: is it possible to enlarge the station icons and the markings on the map using maybe bold fonts??
73 Giovanni IZ5PQT
|
Alas, it takes a _very_ long time (hours to _days_) to import the OSM data, especially from the bzipped XML format. Part of the issue is that the OSM database is structured optimally for a DB (what they call "normalized"). The YAAC importer
deliberately de-normalizes the data for efficiency in rendering, which requires huge temporary datafiles (in excess of 48GB) to hold all the OSM Node lat/lon values for easy access in putting those values directly into OSM Way objects instead having to convert
Node IDs to lat/lon at render time. Note this code is optimized for whole-planet imports, so it wastes a _lot_ of temporary disk space when doing a subset import.
How exactly did you stop the import? If you use the Cancel button on the import progress dialog window, the importer will delete all its temporary files as part of import termination, but even that could take several minutes, depending on the
speed of your filesystem and the number of tile-specific temporary files that need to be cleaned up. If you just shut down YAAC, the importer won't get a chance to delete the temporary files.
The temporary files are located in your YAAC tile file directory (by default, ${HOME}/YAAC/tiledir [where ${HOME} is your user-specific home directory] unless you used the expert-mode Configuration dialog to put it somewhere else). Any file
in that directory or its latitude-specific subdirectories ending in .tmp (temporary data files) or .log (importer progess log) can be safely deleted (unless an import is currently in progress, of course). Alternatively, you could just start another import
(which cleans up any stale temporary files before starting over) and immediately Cancel it properly so it can clean up the few new temporary files.
Due to the pain of importing OSM data, I make a copy of my whole-planet data available on my website, so you can download already-imported OSM data directly into YAAC without having to run the importer yourself. Go to File->OpenStreetMap->Download
Pre-imported Tiles choice, and choose the geographical area you want to download. However, due to troubleshooting a new unreleased feature in the importer, I haven't updated my website's map tiles since November 2022. So the data is available, but won't have
any OSM changes or additions since November.
Hope this helps.
Andrew, KA2DDO
author of YAAC
Hello everybody,
I am a new user and had a problem when installing maps.?
I have YAAC installed on my Windows 10 machine since 2017, but I never used it. Yesterday I decided to configure it and to download the OSM maps
for Italy (.bz2 file about 3.1 GB). I had 190 GB of disk free space.?
After 8 hours in the process of installing the maps in YAAC I decided to cancel the operation, assuming that something wasn't working properly.
The final result is that now I have only 137 GB of free disk space! 53 GB have disappered.
Where the space was eaten up? I checked in the obvious places but I could not find any files so large.?
Any suggestion ?
73 Giovanni?
|
I've tried several different methods to test filtered message, and it's not capturing anything. I've set my callsign as addressee, and I've used Any. Can you recommend a good way to test and troubleshoot this feature?
|
It would work, except that you'll send the same automatic reply to ANSRVR itself when it acknowledges you joining up, and whenever you want to converse with someone else, they will see your automatic replies to their messages in addition to anything you manually send. Hmmm... maybe I should do an alternate version of automatic reply that is specific to a filtered message filter..... Andrew, KA2DDO author of YAAC ________________________________________ From: [email protected] < [email protected]> on behalf of JB via groups.io <i05jt0te@...> Sent: Saturday, May 20, 2023 10:43 AM To: [email protected]Subject: Re: [yaac-users] Filtered Messages [Edited Message Follows] Ahh, thanks for the explanation. So if I understand it correctly, if I put my callsign in the Addressee field, I should see any messages destined for me specifically? For the WAS event, I'm not wanting to capture the ANSRVR forwards. The idea is that someone checks in to HOTG, YAAC sends an auto reply (thanks for that feature, it's been really helpful for APRSThursday), and anyone who wants to reply back does so directly to me, not via ANSRVR. In other words, HOTG join and cq messages should not count as a contact, only messages sent directly. So how I have it set up in the screenshots, would this work for that scenario?
|
Ahh, thanks for the explanation. So if I understand it correctly, if I put my callsign in the Addressee field, I should see any messages destined for me specifically?
For the WAS event, I'm not wanting to capture the ANSRVR forwards. The idea is that someone checks in to HOTG, YAAC sends an auto reply (thanks for that feature, it's been really helpful for APRSThursday), and anyone who wants to reply back does so directly to me, not via ANSRVR. In other words, HOTG join and cq messages should not count as a contact, only messages sent directly. So how I have it set up in the screenshots, would this work for that scenario?
|
km4ack
Giovanni IZ5PQT
