Happy holidays to everyone out there!
Greetings, and happy holidays (whichever one you choose at this time of year).
And thank you for using my program YAAC and making it useful around the world.
Andrew, KA2DDO
author of YAAC
|
Re: How to add a path to the default message paths?
Hi, Dan. You want to add your additional path in the expert-mode Configuration dialog (File->Configure->Expert Mode) on the Digipeat tab. That's where the default list of digipeat paths is managed. Hope that helps. Andrew, KA2DDO author of YAAC ________________________________________ From: [email protected] < [email protected]> on behalf of Dan Hurd W5DMH Sent: Saturday, December 24, 2022 4:33 PM When I send a message, occasionally I want to send it with a path that includes NOGATE . I have added the custom path in a couple places but it still does not show in the message path drop down. Dan W5DMH
|
How to add a path to the default message paths?
When I send a message, occasionally I want to send it with a path that includes NOGATE .?
I have added the custom path in a couple places but it still does not show in the message path drop down.?
Dan W5DMH?
|
Re: Network GPS apps from phone
Hi Andrew,
No worries. Please let us all know when it’s available.
Cheers,
Mike.
toggle quoted message
Show quoted text
On 3 Dec 2022, at 17:32, Andrew P. <andrewemt@...> wrote:
Greetings.
Ack! A stupid typo; I named the driver two different ways (with and without hyphens in the name), so the port driver couldn't be looked up by its name. Will be fixed in next upgrade of marineports plugin.
Sorry, everyone.
Andrew, KA2DDO
author of YAAC
________________________________________
From: [email protected] <[email protected]> on behalf of sv Zen Again <vk6hsr@...>
Sent: Saturday, December 3, 2022 12:28 PM
To: [email protected]
Subject: Re: [yaac-users] Network GPS apps from phone
Hi Andrew,
Thanks. Successfully downloaded and installed the plugin.
I tried to configure a new port with default config (which the Navionics app on my iPad accepts)...
But when I click Save it fails...
I???m running YAAC with direwolf on a Mac Mini M1 with MacOS 13.0.1.
Cheers,
MIke.
On 3 Dec 2022, at 11:03, Andrew P. <andrewemt@...> wrote:
Inside YAAC, just go to Help->Install Plugins, and you can download it from there. I had to take the direct links off my web page because I was getting too many hits from untrustworthy web robots.
Andrew, KA2DDO
________________________________________
From: [email protected] <[email protected]> on behalf of sv Zen Again <vk6hsr@...>
Sent: Saturday, December 3, 2022 8:00 AM
To: [email protected]
Subject: Re: [yaac-users] Network GPS apps from phone
Awesome^2!
Can???t find a link to download marineports.jar - no link for it at
Looking forward to getting this working.
Cheers,
MIke.
On 29 Nov 2022, at 22:50, Ronny Julian <k4rjjradio@...> wrote:
Awesome! I forwarded this info to the Build a pi list as well.. Now I need to set mine up. Thanks!
Ronny
K4RJJ
On Tue, Nov 29, 2022 at 10:30 PM Andrew P. <andrewemt@...> wrote:
As of build#181 of YAAC, I also released the new marineports plugin, which allows you to connect to an NMEA-0183 talker over a TCP network connection. So this old request is now met.
Enjoy.
Andrew, KA2DDO
author of YAAC
On Tue, Feb 16, 2021 at 09:08 PM, Ronny Julian wrote:
Andrew can this be a future option? NMEA streamed from a certain IP to a certain IP port 11123? Review Jason's video for further. Looks like a new port is posible.
Ronny
K4RJJ
Regarding this very old request, the new marineports plugin I just made available allows you to bring NMEA-0183 GPS information into YAAC over a TCP network connection.
Andrew, KA2DDO
author of YAAC
[cid:fe28c0d7-67df-4a42-8a8b-62dc3147a90d@...]
[cid:a236b7ae-e207-491d-9148-233792bf6a05@...]
<Screenshot 2022-12-03 at 12.23.28.png><Screenshot 2022-12-03 at 12.21.55.png>
|
Re: Network GPS apps from phone
Greetings. Ack! A stupid typo; I named the driver two different ways (with and without hyphens in the name), so the port driver couldn't be looked up by its name. Will be fixed in next upgrade of marineports plugin. Sorry, everyone. Andrew, KA2DDO author of YAAC ________________________________________ From: [email protected] < [email protected]> on behalf of sv Zen Again <vk6hsr@...> Sent: Saturday, December 3, 2022 12:28 PM To: [email protected]Subject: Re: [yaac-users] Network GPS apps from phone Hi Andrew, Thanks. Successfully downloaded and installed the plugin. I tried to configure a new port with default config (which the Navionics app on my iPad accepts)... But when I click Save it fails... I???m running YAAC with direwolf on a Mac Mini M1 with MacOS 13.0.1. Cheers, MIke. On 3 Dec 2022, at 11:03, Andrew P. <andrewemt@...> wrote:
Inside YAAC, just go to Help->Install Plugins, and you can download it from there. I had to take the direct links off my web page because I was getting too many hits from untrustworthy web robots.
Andrew, KA2DDO
________________________________________
From: [email protected] <[email protected]> on behalf of sv Zen Again <vk6hsr@...>
Sent: Saturday, December 3, 2022 8:00 AM
To: [email protected]
Subject: Re: [yaac-users] Network GPS apps from phone
Awesome^2!
Can???t find a link to download marineports.jar - no link for it at
Looking forward to getting this working.
Cheers,
MIke.
On 29 Nov 2022, at 22:50, Ronny Julian <k4rjjradio@...> wrote:
Awesome! I forwarded this info to the Build a pi list as well.. Now I need to set mine up. Thanks!
Ronny
K4RJJ
On Tue, Nov 29, 2022 at 10:30 PM Andrew P. <andrewemt@...> wrote:
As of build#181 of YAAC, I also released the new marineports plugin, which allows you to connect to an NMEA-0183 talker over a TCP network connection. So this old request is now met.
Enjoy.
Andrew, KA2DDO
author of YAAC
On Tue, Feb 16, 2021 at 09:08 PM, Ronny Julian wrote:
Andrew can this be a future option? NMEA streamed from a certain IP to a certain IP port 11123? Review Jason's video for further. Looks like a new port is posible.
Ronny
K4RJJ
Regarding this very old request, the new marineports plugin I just made available allows you to bring NMEA-0183 GPS information into YAAC over a TCP network connection.
Andrew, KA2DDO
author of YAAC
[cid:fe28c0d7-67df-4a42-8a8b-62dc3147a90d@...] [cid:a236b7ae-e207-491d-9148-233792bf6a05@...]
|
Re: Network GPS apps from phone
Hi Andrew,
Thanks. Successfully downloaded and installed the plugin.
I tried to configure a new port with default config (which the Navionics app on my iPad accepts)...
But when I click Save it fails...
I’m running YAAC with direwolf on a Mac Mini M1 with MacOS 13.0.1.
Cheers,
MIke.
toggle quoted message
Show quoted text
On 3 Dec 2022, at 11:03, Andrew P. <andrewemt@...> wrote:
Inside YAAC, just go to Help->Install Plugins, and you can download it from there. I had to take the direct links off my web page because I was getting too many hits from untrustworthy web robots.
Andrew, KA2DDO
________________________________________
From: [email protected] <[email protected]> on behalf of sv Zen Again <vk6hsr@...>
Sent: Saturday, December 3, 2022 8:00 AM
To: [email protected]
Subject: Re: [yaac-users] Network GPS apps from phone
Awesome^2!
Can’t find a link to download marineports.jar - no link for it at
Looking forward to getting this working.
Cheers,
MIke.
On 29 Nov 2022, at 22:50, Ronny Julian <k4rjjradio@...> wrote:
Awesome! I forwarded this info to the Build a pi list as well.. Now I need to set mine up. Thanks!
Ronny
K4RJJ
On Tue, Nov 29, 2022 at 10:30 PM Andrew P. <andrewemt@...> wrote:
As of build#181 of YAAC, I also released the new marineports plugin, which allows you to connect to an NMEA-0183 talker over a TCP network connection. So this old request is now met.
Enjoy.
Andrew, KA2DDO
author of YAAC
On Tue, Feb 16, 2021 at 09:08 PM, Ronny Julian wrote:
Andrew can this be a future option? NMEA streamed from a certain IP to a certain IP port 11123? Review Jason's video for further. Looks like a new port is posible.
Ronny
K4RJJ
Regarding this very old request, the new marineports plugin I just made available allows you to bring NMEA-0183 GPS information into YAAC over a TCP network connection.
Andrew, KA2DDO
author of YAAC
|
Re: Network GPS apps from phone
Inside YAAC, just go to Help->Install Plugins, and you can download it from there. I had to take the direct links off my web page because I was getting too many hits from untrustworthy web robots. Andrew, KA2DDO ________________________________________ From: [email protected] < [email protected]> on behalf of sv Zen Again <vk6hsr@...> Sent: Saturday, December 3, 2022 8:00 AM To: [email protected]Subject: Re: [yaac-users] Network GPS apps from phone Awesome^2! Can’t find a link to download marineports.jar - no link for it at Looking forward to getting this working. Cheers, MIke. On 29 Nov 2022, at 22:50, Ronny Julian <k4rjjradio@...> wrote:
Awesome! I forwarded this info to the Build a pi list as well.. Now I need to set mine up. Thanks!
Ronny
K4RJJ
On Tue, Nov 29, 2022 at 10:30 PM Andrew P. <andrewemt@...> wrote:
As of build#181 of YAAC, I also released the new marineports plugin, which allows you to connect to an NMEA-0183 talker over a TCP network connection. So this old request is now met.
Enjoy.
Andrew, KA2DDO
author of YAAC
On Tue, Feb 16, 2021 at 09:08 PM, Ronny Julian wrote:
Andrew can this be a future option? NMEA streamed from a certain IP to a certain IP port 11123? Review Jason's video for further. Looks like a new port is posible.
Ronny
K4RJJ
Regarding this very old request, the new marineports plugin I just made available allows you to bring NMEA-0183 GPS information into YAAC over a TCP network connection.
Andrew, KA2DDO
author of YAAC
|
Re: Network GPS apps from phone
Awesome^2!
Can’t find a link to download marineports.jar - no link for it at
Looking forward to getting this working.
Cheers,
MIke.
toggle quoted message
Show quoted text
On 29 Nov 2022, at 22:50, Ronny Julian <k4rjjradio@...> wrote:
Awesome! I forwarded this info to the Build a pi list as well.. Now I need to set mine up. Thanks!
Ronny
K4RJJ
On Tue, Nov 29, 2022 at 10:30 PM Andrew P. <andrewemt@...> wrote:
As of build#181 of YAAC, I also released the new marineports plugin, which allows you to connect to an NMEA-0183 talker over a TCP network connection. So this old request is now met.
Enjoy.
Andrew, KA2DDO
author of YAAC
On Tue, Feb 16, 2021 at 09:08 PM, Ronny Julian wrote:
Andrew can this be a future option? NMEA streamed from a certain IP to a certain IP port 11123? Review Jason's video for further. Looks like a new port is posible.
Ronny
K4RJJ
Regarding this very old request, the new marineports plugin I just made available allows you to bring NMEA-0183 GPS information into YAAC over a TCP network connection.
Andrew, KA2DDO
author of YAAC
|
Never tried with that one but if you can't get it working I'll trade you a spare KPC-3 (last firmware version installed) I have here for yours.? Good on QRZ if you want to email off list.? ?K4RJJ
On Thu, Dec 1, 2022 at 3:52 PM Tim Huffaker < thuffaker@...> wrote: Has anyone got Mobilinkd working with YAAC.? I am trying with an FTM-400 that works well using the Mobilinkd TNC 3 to do packet winlink.? Yaac does not seem to see the packets coming from the TNC.? So I wanted to check and see if anyone has this working. ?
Tim?
KM4ESU
|
Has anyone got Mobilinkd working with YAAC. ?I am trying with an FTM-400 that works well using the Mobilinkd TNC 3 to do packet winlink. ?Yaac does not seem to see the packets coming from the TNC. ?So I wanted to check and see if anyone has this working. ?
Tim?
KM4ESU
|
Re: Network GPS apps from phone
Awesome!? I forwarded this info to the Build a pi list as well..? ?Now I need to set mine up.? Thanks!
Ronny K4RJJ
On Tue, Nov 29, 2022 at 10:30 PM Andrew P. < andrewemt@...> wrote: As of build#181 of YAAC, I also released the new marineports plugin, which allows you to connect to an NMEA-0183 talker over a TCP network connection. So this old request is now met.
Enjoy.
Andrew, KA2DDO
author of YAAC
On Tue, Feb 16, 2021 at 09:08 PM, Ronny Julian wrote:
Andrew can this be a future option?? NMEA streamed from a certain IP to a certain IP port 11123?? Review Jason's video for further.? Looks like a new port?is posible.
?
?
Ronny
K4RJJ
?Regarding this very old request, the new marineports plugin I just made available allows you to bring NMEA-0183 GPS information into YAAC over a TCP network connection.
Andrew, KA2DDO
author of YAAC
|
Re: Network GPS apps from phone
As of build#181 of YAAC, I also released the new marineports plugin, which allows you to connect to an NMEA-0183 talker over a TCP network connection. So this old request is now met.
Enjoy.
Andrew, KA2DDO
author of YAAC
toggle quoted message
Show quoted text
On Tue, Feb 16, 2021 at 09:08 PM, Ronny Julian wrote:
Andrew can this be a future option?? NMEA streamed from a certain IP to a certain IP port 11123?? Review Jason's video for further.? Looks like a new port?is posible.
?
?
Ronny
K4RJJ
?Regarding this very old request, the new marineports plugin I just made available allows you to bring NMEA-0183 GPS information into YAAC over a TCP network connection. Andrew, KA2DDO author of YAAC
|
next beta build#181 of YAAC, created 2022-Nov-27
next beta build#181 of YAAC ("Yet Another APRS Client"), created 2022-Nov-27
downloadable from
or
changes and updates include:
1. fix reported NullPointerExceptions when attempting to transmit
or processed delayed text message ack or rej messages.
2. better identify the types of traffic incoming from a specific
PortConnector instance to ensure non-realtime traffic does not
get digipeated or I-gated.
3. add support for plugins to register handling non-GNSS NMEA-0183
sentences, so a multi-sensor NMEA-0183 talker can be handled by
the plugins.
4. optimize file reading for OSM files some more.
5. fix some bugs in configuration XML importer.
6. add the ability to configurably route traffic to known stations
through only the port the station was most closely seen through.
7. don't plot labels on OpenStreetMap pipeline Ways, and don't
display anything tagged as underground (not yet saved in OSM
importers.
8. augment the APRS-IS pseudo server plugin to allow connected
sub-clients to forward APRS packets to the YAAC instance, and
have YAAC configurably forward that traffic on through the regular
ports (RF and APRS-IS backbone).
9. fix repeater finder plugin to use more accurate traffic sourcing
changes.
10. add new marineports plugin which provides the ability to read
NMEA-0183 GPS data through a TCP connection to a network server
sending the raw sentences.
|
Re: i want to send weather data(nmea2000) from signalk to YAAC
Hi Andrew
Thank you so much!
I look forward to seeing it come to fruition.
WhiteMane
|
Re: i want to send weather data(nmea2000) from signalk to YAAC
OK, I have an initial draft of a NMEA-0183 over TCP/IP port driver plugin for YAAC that I expect to release with the next build of YAAC. Don't have the SignalK REST support yet, but I could add that in a future version of the plugin should NMEA0183 over TCP not be enough. Andrew, KA2DDO author of YAAC ________________________________________ From: [email protected] < [email protected]> on behalf of sv Zen Again <vk6hsr@...> Sent: Sunday, November 6, 2022 5:36 AM To: [email protected]Subject: Re: [yaac-users] i want to send weather data(nmea2000) from signalk to YAAC Hi White Mane, The NMEA data YAAC wants is on your RPi’s port 10110. That’s if in SignalK you’ve enabled the ‘Convert SignalK to NMEA0183’ plugin and configured the RMC sentence for output. But YAAC needs to support IP datastream ports in addition to physical serial ports for that to work Perhaps it does, but I haven’t managed to find how to configure one yet. Cheers, Mike. On 6 Nov 2022, at 03:35, WHITE MANE <whitemanenishinomiya@...> wrote:
First of all would like to thank You, about great job you did and do. Awesome.
There is nmea2000 backbone bus in my sailing vessel.
And OpenPlotter on raspberry pi that connects the bus.
I am trying to send APRS weather beacon from YAAC installed in that raspberry pi.
Thank you for your information!
2022年11月5日(土) 7:25 sv Zen Again <vk6hsr@...>:
Gday,
SignalK accepts data from NMEA0183 or NMEA2000 sources via appropriate hardware interfaces (eg Actisense NGT-1 for NMEA2000). It then makes the data available to apps in an ‘internet friendly’ format. Or one can have it output NMEA2000 data as a NMEA0183 IP datastream.
It would be nice if YAAC was able to accept NMEA0183 TCP datastreams on IP ports. I’d certainly use it and I’m sure many other sailors would too. And that doesn’t mean they all need SignalK since most modern onboard networks have a WiFi hotspot which emits a NMEA0183 TCP datastream.
厂别别…
*
*
*
Cheers,
Mike.
On 4 Nov 2022, at 18:06, Andrew P. <andrewemt@...> wrote:
Nope. There is no support for NMEA 2000 bus interfaces in YAAC, and since the NMEA is so tight-lipped as to not make their specification freely public (as opposed to NDA after you pay US$2000 to see it), I don't expect to see direct support for it any time soon.
As for interfacing to a SignalK gateway to an NMEA2000 bus, never heard of it before. Looks interesting (as a source for both GPS and weather data), but I'd have to see how much interest there is in it before spending time coding up a plugin to add a YAAC port for it.
Andrew, KA2DDO
author of YAAC
________________________________________
From: [email protected] <[email protected]> on behalf of WHITE MANE <whitemanenishinomiya@...>
Sent: Friday, November 4, 2022 1:05 PM
To: [email protected]
Subject: [yaac-users] i want to send weather data(nmea2000) from signalk to YAAC
i want to send weather data(nmea2000) from signalk to YAAC
do you have any idea?
|
Re: Chasing Balloons/Radiosondes
Thanks, Kurt. I would really prefer to display on my YAAC map if possible. It would be much better to only have one map to look at, especially in the mobile on a 10 inch screen.
Michael WA7SKG
KB9RKU Kurt Clausen wrote on 11/22/22 3:18 PM:
toggle quoted message
Show quoted text
Use the Chasemapper app in conjunction with radiosonde autorx, the sondes used to be reported to APRS, but it caused to much network traffic. Go look thru the autorx site and the group messages, you'll see the reasons there. Chasemapper app works very well, it gives you a predicted landing site that is very good.
KB9RKU
86 Sondes recovered so far
kb9rku@... <mailto:kb9rku@...>
On Tue, Nov 22, 2022, 2:49 PM Michael WA7SKG <wa7skg@... <mailto:wa7skg@...>> wrote:
I'm thinking about getting into a new aspect of things. Not
specifically
ham radio but adapted to and from it. The airport a few miles away
launches weather balloons twice a day which carries a radiosonde that
broadcasts on around 403 MHz. I'm putting together some receiver
packages for the house and the mobile to receive and decode these
things. They provide weather as well as position data. They show up on
aprs.fi <>.
I'm planning on using the Auto-Rx package for the purpose. What I'd
like
is for it to display as an item on my YAAC display. In the house, on
the
big screen I can watch them and, if I see something viable, hop in the
truck and track it in the mobile and maybe find the device when it
lands.
So, this leads to a few questions.
Is anyone familiar with Auto-RX and interfacing it to YAAC?
Is it possible to navigate to an APRS item shown in YAAC, or do I just
watch the screen and head for it?
Any other suggestions or tips for this project?
Thanks.
--
73,
Michael WA7SKG
"Any day you do not learn one new thing is a wasted day."
|
Re: Yaac beta 180 RF port shuts down trying to beacon
I wish you hadn't cropped the stack trace from the failure; I would like to know how it got to that point. But I have a few guesses; I'll see if I can get them into the next build. Andrew, KA2DDO author of YAAC ________________________________________ From: [email protected] < [email protected]> on behalf of KH6CP Craig Paul <carcarx@...> Sent: Tuesday, November 22, 2022 8:33 PM To: [email protected]Subject: [yaac-users] Yaac beta 180 RF port shuts down trying to beacon It works just fine (Direwolf 1.7a) then tries to beacon and claims that it can't find port 8000 anymore. Tue Nov 22 15:16:30 HST 2022: try#0: connection to localhost/127.0.0.1:8000<> lost: Connection reset *** unhandled exception in TransmitterThread with entry type BeaconData: BeaconData[=2125.01N/15748.59W- ]do.org/ka2ddo/YAAC.html<> java.lang.NullPointerException: Cannot invoke "org.ka2ddo.ax25.AX25Callsign.equals(Object)" because "this.sender" is null at org.ka2ddo.ax25.AX25Frame.isDuplicate(AX25Frame.java:1040) at org.ka2ddo.ax25.AX25Frame.equals(AX25Frame.java:1019) at java.base/java.util.Objects.equals(Objects.java:64) at java.base/java.util.Arrays.equals(Arrays.java:2979) at org.ka2ddo.yaac.io.Transmitter.sendForOnePort(Transmitter.java:601) Tue Nov 22 15:29:30 HST 2022: YAACBootstrap starting... os.name<>=Windows 11 os.version=10.0 os.arch=amd64 locale=en_US java.version=18.0.2 java.class.version=62.0 JVM: Oracle Corporation OpenJDK 64-Bit Server VM 18.0.2+9-61 java.class.path=YAAC.jar Tue Nov 22 15:29:30 HST 2022: YAACBootstrap finding installation directory.... JSSC found at C:\YAAC\lib\jssc-2.9.4.jar Tue Nov 22 15:29:30 HST 2022: starting YAAC.... Tue Nov 22 15:29:30 HST 2022: YAAC initializing on Windows 11 10.0 [amd64] with Java 18.0.2 Tue Nov 22 15:29:30 HST 2022: load cached preferences.... Tue Nov 22 15:29:30 HST 2022: YAAC checking if upgrader needs moving.... Tue Nov 22 15:29:30 HST 2022: YAAC loading CoreProvider.... Tue Nov 22 15:29:30 HST 2022: CoreProvider instantiated. Tue Nov 22 15:29:30 HST 2022: creating SymAttr objects for 1.0.1... Tue Nov 22 15:29:30 HST 2022: filling in text for 1.0.1 symbols... Tue Nov 22 15:29:30 HST 2022: filling in text for extended symbols... loading plugin --core-- name YAAC version 1.0-beta180(30-Oct-2022) Ideas? Thanks! Craig/KH6CP
|
Re: Chasing Balloons/Radiosondes
Actually, since the Auto_rx app can push data into APRS-IS, it could also push data into the latest enhancement of YAAC's aprsispseudoserver (a plugin implementing a "fake" APRS-IS server for downstream clients to connect to so they can share the RF connection of YAAC). Alas, I haven't made the latest enhancement to this plugin available yet, so I'd better get it posted. YAAC does not have a navigation capability, but it can forward received data to an external GPS with screen and serial port that supports waypoint sentences ($GPWPT). Andrew, KA2DDO author of YAAC ________________________________________ From: [email protected] < [email protected]> on behalf of KB9RKU Kurt Clausen <kb9rku@...> Sent: Tuesday, November 22, 2022 6:18 PM To: [email protected]Subject: Re: [yaac-users] Chasing Balloons/Radiosondes Use the Chasemapper app in conjunction with radiosonde autorx, the sondes used to be reported to APRS, but it caused to much network traffic. Go look thru the autorx site and the group messages, you'll see the reasons there. Chasemapper app works very well, it gives you a predicted landing site that is very good. KB9RKU 86 Sondes recovered so far kb9rku@...<mailto:kb9rku@...> On Tue, Nov 22, 2022, 2:49 PM Michael WA7SKG <wa7skg@...<mailto:wa7skg@...>> wrote: I'm thinking about getting into a new aspect of things. Not specifically ham radio but adapted to and from it. The airport a few miles away launches weather balloons twice a day which carries a radiosonde that broadcasts on around 403 MHz. I'm putting together some receiver packages for the house and the mobile to receive and decode these things. They provide weather as well as position data. They show up on aprs.fi<>. I'm planning on using the Auto-Rx package for the purpose. What I'd like is for it to display as an item on my YAAC display. In the house, on the big screen I can watch them and, if I see something viable, hop in the truck and track it in the mobile and maybe find the device when it lands. So, this leads to a few questions. Is anyone familiar with Auto-RX and interfacing it to YAAC? Is it possible to navigate to an APRS item shown in YAAC, or do I just watch the screen and head for it? Any other suggestions or tips for this project? Thanks. -- 73, Michael WA7SKG "Any day you do not learn one new thing is a wasted day."
|
Re: Chasing Balloons/Radiosondes
Use the Chasemapper app in conjunction with radiosonde autorx, the sondes used to be reported to APRS, but it caused to much network traffic. Go look thru the autorx site and the group messages, you'll see the reasons there. Chasemapper app works very well, it gives you a predicted landing site that is very good.
KB9RKU
86 Sondes recovered so far
On Tue, Nov 22, 2022, 2:49 PM Michael WA7SKG < wa7skg@...> wrote: I'm thinking about getting into a new aspect of things. Not specifically
ham radio but adapted to and from it. The airport a few miles away
launches weather balloons twice a day which carries a radiosonde that
broadcasts on around 403 MHz. I'm putting together some receiver
packages for the house and the mobile to receive and decode these
things. They provide weather as well as position data. They show up on
.
I'm planning on using the Auto-Rx package for the purpose. What I'd like
is for it to display as an item on my YAAC display. In the house, on the
big screen I can watch them and, if I see something viable, hop in the
truck and track it in the mobile and maybe find the device when it lands.
So, this leads to a few questions.
Is anyone familiar with Auto-RX and interfacing it to YAAC?
Is it possible to navigate to an APRS item shown in YAAC, or do I just
watch the screen and head for it?
Any other suggestions or tips for this project?
Thanks.
--
73,
Michael WA7SKG
"Any day you do not learn one new thing is a wasted day."
|
Yaac beta 180 RF port shuts down trying to beacon
It works just fine (Direwolf 1.7a) then tries to beacon and claims that it can't find port 8000 anymore.
Tue Nov 22 15:16:30 HST 2022: try#0: connection to localhost/ lost: Connection reset *** unhandled exception in TransmitterThread with entry type BeaconData: BeaconData[=2125.01N/15748.59W- ] java.lang.NullPointerException: Cannot invoke "org.ka2ddo.ax25.AX25Callsign.equals(Object)" because "this.sender" is null ? ? ? ? at org.ka2ddo.ax25.AX25Frame.isDuplicate(AX25Frame.java:1040) ? ? ? ? at org.ka2ddo.ax25.AX25Frame.equals(AX25Frame.java:1019) ? ? ? ? at java.base/java.util.Objects.equals(Objects.java:64) ? ? ? ? at java.base/java.util.Arrays.equals(Arrays.java:2979) ? ? ? ? at org.ka2ddo.yaac.io.Transmitter.sendForOnePort(Transmitter.java:601)
Tue Nov 22 15:29:30 HST 2022: YAACBootstrap starting...
=Windows 11
os.version=10.0
os.arch=amd64
locale=en_US
java.version=18.0.2
java.class.version=62.0
JVM: Oracle Corporation OpenJDK 64-Bit Server VM 18.0.2+9-61
java.class.path=YAAC.jar
Tue Nov 22 15:29:30 HST 2022: YAACBootstrap finding installation directory....
JSSC found at C:\YAAC\lib\jssc-2.9.4.jar
Tue Nov 22 15:29:30 HST 2022: starting YAAC....
Tue Nov 22 15:29:30 HST 2022: YAAC initializing on Windows 11 10.0 [amd64] with Java 18.0.2
Tue Nov 22 15:29:30 HST 2022: load cached preferences....
Tue Nov 22 15:29:30 HST 2022: YAAC checking if upgrader needs moving....
Tue Nov 22 15:29:30 HST 2022: YAAC loading CoreProvider....
Tue Nov 22 15:29:30 HST 2022: CoreProvider instantiated.
Tue Nov 22 15:29:30 HST 2022: creating SymAttr objects for 1.0.1...
Tue Nov 22 15:29:30 HST 2022: filling in text for 1.0.1 symbols...
Tue Nov 22 15:29:30 HST 2022: filling in text for extended symbols...
loading plugin --core-- name YAAC version 1.0-beta180(30-Oct-2022)
Ideas?
Thanks! Craig/KH6CP
|
sv Zen Again
Michael WA7SKG