开云体育

CATS looks interesting to me as well. I've put myself on the list to be notified when some hardware is available on their store. Hopefully in the next week or two. -- Cheers and 73 - Jon N7UV

Greetings Andrew - Thanks for integrating an ADS-B viewer into YAAC. I run an ADS-B receiver in the truck, and especially when I'm out in the middle of nowhere it's nice to be able to ID aircraft

Hmmm... that's odd. Are the AIS stations remaining on the map and the Station/Object List, or only on the Vessel list? I do need to tweak the Vessel list so it supports the Clear Real-time Table menu

Hi Andrew! The AIS plug-in has been working great, thank you for the updates. I did notice though that when an AIS object is spotted and tracked the object will show for days after no packets have

Apparently it was a transient glitch. I ran for a week receiving 4+ messages every day, no problems, followed by a week with no messages received, then checked into APRS Thursday and it sounded for

I've had running for 10 straight days now and it's still playing the .wav file successfully. I don't think I can replicate the problem. Per chance, is your plugin-selected sound card on USB, and did

The filters when applied to Station/Object list does seem to give me only the TNC source as I want. However, when the filters are applied, the Last Rcvd column does not sort correctly. Without the

Stay tuned and I'll see what I can do about getting you some support materials. [email protected]> wrote:

That is true. The Heard Stations view doesn't use YAAC's filtering capability. I will look into fixing this. Also, you might find other views (such as the Station/Object list) that might provide the

Andrew, I am a new YAAC user. I found the filter to works well as you describe here as far as viewing Raw Packets. However, when I view Heard Stations, the filter doesn't seem to block the APRS-IS

Well, YAAC is already dual-mode APRS and OpenTRAC, so one more wouldn't be a huge stretch. The issue is the API to the radio/modem. Andrew, KA2DDO author of

Andrew please consider being the first APRS/CATS dual mode software. This looks good! I'll help where I can. https://www.youtube.com/watch?v=pdgPgH-0QPI Ronny K4RJJ

The first picture is of my rig - the Argent board is installed, along with their USB adapter. The DB9 connector and cable are present - as pictured - just not connected. In the Argent Data sample

So where's the Alinco's original DB9 connector and cable? Did you take it out? It should have been connected to the connector on the Argent Tracker board that didn't come with a cable pre-attached to

That picture was my rig. Here's the sample install that Argent Data has on their Web page ...

Andrew, the Arget board is connected to the radio board with a 10 pin connector or similar cable. Does this then connect to the serial port on the back of the radio? Chris -------------------- From:

On 4/18/24 20:08, Andrew P. wrote: > But there should have been another connection on the Argent board for the DB9 to connect to. The no-installed-daughter-board use of the internal cable is to bring

But there should have been another connection on the Argent board for the DB9 to connect to. The no-installed-daughter-board use of the internal cable is to bring the audio and PTT connections to the

The DB9 connector isn't ... connected ... to anything. The internal connection it uses is being used by the Argent Data board.

Well, another alternative is to ignore the USB pigtail coming out of the radio and use the DB9 connector with a USB-to-RS232 adapter instead. If you have the relevant hardware, try that and see if it