开云体育

Yes, I noticed that I couldn't see it any more either. Apparently, the US National Weather Service has reorganized their radar data products, so I'll have to figure out the new URL to pull from to get the equivalent data. They no longer seem to have a "latest" image, so I'll have to figure out how to get the timestamp, so I can generate the correct new URL based on the newer image timestamp. On the other hand, the new organization gives access to data for areas other than just the Continental United States (CONUS, the lower 48 states), so I might be able to make users happier in other areas.

Are there any YAAC users not in the United States who know of any weather radar data their governments provide free-of-charge on the Internet to get equivalent weather overlays for your areas?

Andrew, KA2DDO
author of YAAC

________________________________________
From: [email protected] <[email protected]> on behalf of Kd2Ucj <kd2ucj@...>
Sent: Wednesday, January 6, 2021 1:15 PM
To: [email protected]
Subject: Re: [yaac-users] ADS-B imagery from dump1090-mutabi

Absolutely incredible. Of all the ports I tried, I failed to attempt
this one. Works perfectly! Thank you.

Additionally, I am having an issue with loading raster maps weather
imagery. I would like to have a weather overlay as well. attached is the
error that was produced while trying to retrieve them. If there is a
better log to pull this from, please let me know and I will pull that.

Also trying the radar.weather.gov/conus website seems to be not
operating correctly.

Thanks for your help!!


Robert

KD2UCJ

On 06/01/2021 11:41, Andrew P. wrote:

Do any of the TCP ports you mentioned produced the raw ADSB packets in the below non-human-interpretable format?

*stringofhexadecimaldigits;

If so, you should be able to use the YAAC plugin in socket mode. You can use the telnet command to connect to one to verify it, i.e.,

telnet flightawarebox 30002

The default dump1090 port for raw output is 30002; have you tried that one yet? Or is that pre-empted by the FlightAware software and not available to other applications?

Andrew, KA2DDO
author of YAAC

________________________________________
From: [email protected] <[email protected]> on behalf of Kd2Ucj <kd2ucj@...>
Sent: Sunday, January 3, 2021 7:32 PM
To: Yaac-Users
Subject: [yaac-users] ADS-B imagery from dump1090-mutabi

Don’t know if this is the best place to ask questions. I’m trying to pump info from my flightaware SDR to imagery on YAAC. 1. Flight aware is using dump1090-fa 2. The standard commands aren’t working for it but it’s pumping info to the flight aware website. I can see the traffic being reported through ports 30005, 8080 and others. 3. I added the port configuration to identify these ports, and the light flashes green. But I’m not getting imagery on YAAC. I saw some talk of readsb being able to convert onto YAAC but I have been unsuccessful. Just seeing who may have intimate experiences with this. Thanks!

Robert
KD2UCJ