Absolutely incredible. Of all the ports I tried, I failed to attempt this one. Works perfectly! Thank you.
Additionally, I am having an issue with loading raster maps weather imagery. I would like to have a weather overlay as well. attached is the error that was produced while trying to retrieve them. If there is a better log to pull this from, please let me know and I will pull that.
Also trying the radar.weather.gov/conus website seems to be not operating correctly.
Thanks for your help!!
Robert
KD2UCJ
toggle quoted message
Show quoted text
On 06/01/2021 11:41, Andrew P. wrote:
Do any of the TCP ports you mentioned produced the raw ADSB packets in the below non-human-interpretable format?
*stringofhexadecimaldigits;
If so, you should be able to use the YAAC plugin in socket mode. You can use the telnet command to connect to one to verify it, i.e.,
telnet flightawarebox 30002
The default dump1090 port for raw output is 30002; have you tried that one yet? Or is that pre-empted by the FlightAware software and not available to other applications?
Andrew, KA2DDO
author of YAAC
________________________________________
From: [email protected] <[email protected]> on behalf of Kd2Ucj <kd2ucj@...>
Sent: Sunday, January 3, 2021 7:32 PM
To: Yaac-Users
Subject: [yaac-users] ADS-B imagery from dump1090-mutabi
Don¡¯t know if this is the best place to ask questions. I¡¯m trying to pump info from my flightaware SDR to imagery on YAAC. 1. Flight aware is using dump1090-fa 2. The standard commands aren¡¯t working for it but it¡¯s pumping info to the flight aware website. I can see the traffic being reported through ports 30005, 8080 and others. 3. I added the port configuration to identify these ports, and the light flashes green. But I¡¯m not getting imagery on YAAC. I saw some talk of readsb being able to convert onto YAAC but I have been unsuccessful. Just seeing who may have intimate experiences with this. Thanks!
Robert
KD2UCJ
