The D710 actually has 2 data ports. The one on the base allows for memory programming and the one not the control head connects to the tnc. I’m beginning to think though this might be a permissions issue.
toggle quoted message
Show quoted text
On Dec 9, 2024, at 09:52, Danny K5CG via groups.io <k5cg@...> wrote:
Yeah, here it is.
/g/yaac-users/topic/88474657#msg1319
73
Danny, K5CG
HH 550-0609
SKCC 14257
----- Original Message -----
From: "Danny K5CG via groups.io" <k5cg@...>
To: "yaac-users" <[email protected]>
Sent: Monday, December 9, 2024 9:50:09 AM
Subject: Re: [yaac-users] Using RTSystems cables
Oh I could be mistaken. YAAC could talk to the D710 if you connect the serial cable to the head unit.
73
Danny, K5CG
HH 550-0609
SKCC 14257
----- Original Message -----
From: "Danny K5CG via groups.io" <k5cg@...>
To: "yaac-users" <[email protected]>
Sent: Monday, December 9, 2024 9:49:20 AM
Subject: Re: [yaac-users] Using RTSystems cables
YAAC doesn't connect to a radio. YAAC connects to a TNC (direwolf/soundmodem). The TNC connects to the radio.
73
Danny, K5CG
HH 550-0609
SKCC 14257
----- Original Message -----
From: "T W via groups.io" <kf6kyd@...>
To: "yaac-users" <[email protected]>
Sent: Sunday, December 8, 2024 7:13:10 PM
Subject: [yaac-users] Using RTSystems cables
Hi, I am trying to configure a port through yaac to my Kenwood D710 using an RTsytems cable. No matter what setting I choose I cannot communicate with yaac. The RTsystems software works fine, I am trying to configure a port and when I use the test function all I get is a blank window. Any help is appreciated.
Cheers
Tom kf6kyd
