Re: YAAC and Direwolf interfacing
|
Hi Joe, The default direwolf configuration should listen on both ports 8000 (AGWPE) and 8001 for KISS. In YAAC, all you need to do is choose the option you want, and set the hostname and port in the fields Attached a couple screenshots of my AGWPE and KISS configurations: KISS: AGWPE: Note that DireWolf will only send to KISS/AGWPE what it hears over RF *only*. If another AGWPE/KISS client connects and sends, OR if DireWolf is configured as an iGate, these messages will not be relayed into YAAC by default. To do so, you would need to add a configuration like this to direwolf.conf: ICHANNEL 15 # Define an internal direwolf channel 15 which should receive APRS-IS traffic KISSCOPY # Enable copying traffic to/from KISS ports KISSPORT 8001 # Default listener on 8001 KISSPORT 8015 15 # Assign port 8015 to ICHANNEL 15 Then, you can configure a KISS port in YAAC?on this port to hear IS messages forwarded from YAAC. I hope this helps, Joe. Please let me know if you need any clarification on anything. --- One thing I still have not yet figured out, and would appreciate others' expertise here, is a peculiarity I've discovered regardless of if I have DireWolf or YAAC or Both configured as iGates: When sending some messages to a station not in range of me, the station correctly routes the ACK to my station via IS, however when YAAC receives this reply (and TX is turned off on the IS port), the ACK over RF is sent without the original message's?digipeater path, leading to a situation where my station won't acknowledge messages heard via RF. I'm not sure if this is a knob I need to turn (or make) in YAAC or DireWolf or both, but it definitely feels like I'm missing something... To elaborate further, I primarily want to use RF instead of IS, but if a message ack is heard over IS, either respond via IS to the ack *or* (preferably) use the same digipeater path to acknowledge the message as it was sent with. 73, Neil N1HAN On Sat, Nov 30, 2024 at 1:15?PM Joseph LaFerla via <joe=[email protected]> wrote:
|