And if you don't see it there, unplug the USB to the radio, do
ls -l /dev
then plug the USB into the radio and turn it on and run the same command
again. Look through the list to see what changed. The new entry will be
what you need use for your port. These days, with all kinds of weird USB
stuff out there, it could show up a number of different ways.
Michael WA7SKG
Andrew P. wrote on 4/18/24 12:16 PM:
toggle quoted message
Show quoted text
Just to make sure it's not a YAAC problem, after connecting the USB
cable and powering up the Alinco radio, try issuing the Linux shell command:
ls -l /dev/ttyUSB*
Do you actually find any such devices on your Linux system?
Andrew, KA2DDO
------------------------------------------------------------------------
*From:* [email protected] <[email protected]> on behalf of DavidC
KD4E <qrv@...>
*Sent:* Thursday, April 18, 2024 3:07:50 PM
*To:* [email protected] <[email protected]>
*Subject:* Re: [yaac-users] YAAC - Installed on inovato Quadra but no
USB to TNC option
They provide a short adapter cable from the mini-USB connector on the
TNC board
to a printer-type 'square' USB-B connector.
I tried bypassing that adapter with a mini-USB to USB cable, to rule-out
an adapter failure.
No joy.
On 4/18/24 11:30, Christopher Rose wrote:
How is the Argent product wired through the radio case?
On Apr 18, 2024 9:49 AM, DavidC KD4E <qrv@...> wrote:
No.
When you install the Argent Data Tracker the Serial Port is no
longer accessible.
YAAC can't communicate with a USB port?
Michael WA7SKG