I know it's not YAAC at the moment.
I'm communicating with Argent Data to sort out why their device
might not be recognized.
Data mode is activated on the Alinco.
I've tried changing cables, connecting and disconnecting the
cable, powering the rig off and?
on while everything else was up, and restarting the inovato
Quadra.
On 4/18/24 15:16, Andrew P. wrote:
toggle quoted message
Show quoted text
Just to make sure it's not a YAAC problem, after connecting the
USB cable and powering up the Alinco radio, try issuing the
Linux shell command:
ls -l /dev/ttyUSB*
Do you actually find any such devices on your Linux system?
Andrew, KA2DDO
They provide a short adapter cable from the mini-USB
connector on the TNC board
to a printer-type 'square' USB-B connector.
I tried bypassing that adapter with a mini-USB to USB
cable, to rule-out an adapter failure.
No joy.
On 4/18/24 11:30, Christopher
Rose wrote:
How is the Argent product wired through the
radio case?
DavidC KD4E